Rod Ends Ptfe Lined Categories
Rod Ends - Steel - PTFE Lined - Tight Fit - Female
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Female on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male
Tight fit (Minimal ball clearance). Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - PTFE Seat - Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
There is also a good range of Rod Ends - Steel - Studded - PTFE Seat - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - PTFE Seat - Male
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
There is also a good range of Rod Ends - Steel - Studded - PTFE Seat - Male on the Small Parts and Bearings website.
Rod - Round - PTFE
Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.
Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.
Related Information:
There is also a good range of Rod - Round - PTFE on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Female
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Male
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel - Bronze Lined - Male
Also known as Heim Joints
Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.
There is also a good range of Rod Ends - Stainless Steel - Bronze Lined - Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female
Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female on the Small Parts and Bearings website.
Rod Ends - Plastic - Female
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Plastic - Female on the Small Parts and Bearings website.
Rod Ends - Plastic - Male
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Plastic - Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female
Also known as Heim Joints
There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male
Also known as Heim Joints
There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male on the Small Parts and Bearings website.
Rod Ends - Steel - Stamped - Female
Economy stamped style combines high strength with low cost. Also known as Heim Joints
Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.
There is also a good range of Rod Ends - Steel - Stamped - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Nylon Raceway - Female
Also known as Heim Joints
There is also a good range of Rod Ends - Steel - Nylon Raceway - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Nylon Raceway - Male
Also known as Heim Joints
There is also a good range of Rod Ends - Steel - Nylon Raceway - Male on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Nylon Seat - Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
There is also a good range of Rod Ends - Steel - Studded - Nylon Seat - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Nylon Seat - Male
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
There is also a good range of Rod Ends - Steel - Studded - Nylon Seat - Male on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Quick Disconnect - Female
Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.
There is also a good range of Rod Ends - Steel - Studded - Quick Disconnect - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Swaged Construction - Female
Designed for heavy duty service, they come with dirt shield to provide protection against contaminants.
Unique assembly swages metal to retain the ball in cavity resulting in increased pull out and wear resistance. Ball studs are surface hardened. Made of low carbon steel, plated and dichromate treated.
There is also a good range of Rod Ends - Steel - Studded - Swaged Construction - Female on the Small Parts and Bearings website.
Hexagonal Bar - Brass
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.
There is also a good range of Hexagonal Bar - Brass on the Small Parts and Bearings website.
Square Bar - Brass
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.
There is also a good range of Square Bar - Brass on the Small Parts and Bearings website.
Threaded Rod - Unthreaded Centre - Steel
UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.
Related Information:
There is also a good range of Threaded Rod - Unthreaded Centre - Steel on the Small Parts and Bearings website.
Caps - End - Kite
End caps with string holes and grooves for kite rods.
Joiners and connectors suitable for rod and tubing as well as for kites.
There is also a good range of Caps - End - Kite on the Small Parts and Bearings website.
Hexagonal Bar - Carbon Steel
Saw Cut Ends. Small A/F sizes may not be perfectly straight.
There is also a good range of Hexagonal Bar - Carbon Steel on the Small Parts and Bearings website.
Joints - Clevis - Plastic
Use with plastic rod ends - Includes pin and clip. See also yokes.
Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.
There is also a good range of Joints - Clevis - Plastic on the Small Parts and Bearings website.
Hexagonal Bar - 303 Stainless
Corrosion resistant 303 grade stainless.
Saw Cut Ends. Small A/F sizes may not be perfectly straight.
There is also a good range of Hexagonal Bar - 303 Stainless on the Small Parts and Bearings website.
Rod - Drill - General
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.
Related Information:
There is also a good range of Rod - Drill - General on the Small Parts and Bearings website.
Balls - Plastic - Bored
Bored acetal balls as used in plastic rod ends.
Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.
Related Information:
There is also a good range of Balls - Plastic - Bored on the Small Parts and Bearings website.
Balls - Steel - Bored
Bored steel balls as used in steel rod ends.
Hardness: 58-64 Rc. Material: SUJ-2.
Related Information:
There is also a good range of Balls - Steel - Bored on the Small Parts and Bearings website.
Hexagonal Bar - Titanium Ti-Gr2 - Rolled
Cold rolled hex bar to ASTM B348
Saw Cut Ends.
There is also a good range of Hexagonal Bar - Titanium Ti-Gr2 - Rolled on the Small Parts and Bearings website.
Hexagonal Bar - Titanium Ti-Gr2 - Drawn
Cold rolled and hot drawn hex bar to ASTM B348
Saw Cut Ends.
There is also a good range of Hexagonal Bar - Titanium Ti-Gr2 - Drawn on the Small Parts and Bearings website.
Bungs and Caps - Reversible - Round
Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.
Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.
Related Information:
There is also a good range of Bungs and Caps - Reversible - Round on the Small Parts and Bearings website.
Washers - Flat - PTFE
Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
Teflon Washers
Related Information:
There is also a good range of Washers - Flat - PTFE on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Closed
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Open
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Small Parts and Bearings website.
Balls - Plastic - PTFE
No water absorption. Temperatures up to 288 Deg C.
Tolerances available on request. Not affected by any known acids or alkalies. No water absorption. Temperatures up to 288 oC. Unpolished. Specific Gravity: 2.3.
Related Information:
There is also a good range of Balls - Plastic - PTFE on the Small Parts and Bearings website.
Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.
Related Information:
There is also a good range of Bearings - SDP - PTFE Filled Acetal - Flange Mounted on the Small Parts and Bearings website.
Tape - Fiberglass - PTFE Coated
Heat Sealer Tape
Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 oC to 260 oC (-100 to 500 Deg F). Less than 5 percent elongation.
There is also a good range of Tape - Fiberglass - PTFE Coated on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard
Low profile self aligning flange mounted PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp
Low profile self aligning flange mounted high temperature PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp
Low profile self aligning flange mounted low temperature PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp on the Small Parts and Bearings website.
Bushes - Stainless Steel and PTFE - Flanged
Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.
Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.
Related Information:
There is also a good range of Bushes - Stainless Steel and PTFE - Flanged on the Small Parts and Bearings website.
Bushes - Stainless Steel and PTFE - Unflanged
Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.
Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.
Related Information:
There is also a good range of Bushes - Stainless Steel and PTFE - Unflanged on the Small Parts and Bearings website.
Housings - Flange Mount - Non Aligning - Bronze
Low profile flange mounted PTFE bronze bearings
See links at bottom of web page for more information.
Related Information:
There is also a good range of Housings - Flange Mount - Non Aligning - Bronze on the Small Parts and Bearings website.
Bolts - Eye - Bent Rod - Steel
Not recommended for lifting.
Carbon steel zinc plated. Complete with nut. Rolled threads.
There is also a good range of Bolts - Eye - Bent Rod - Steel on the Small Parts and Bearings website.
Bearings - Press-Fit - Acetal - SDP
Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.
Related Information:
There is also a good range of Bearings - Press-Fit - Acetal - SDP on the Small Parts and Bearings website.
Bearings - Ceramic ZRO2- Angular Contact
Excellent performance in electrical and magnetism sensitive applications. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.
Related Information:
There is also a good range of Bearings - Ceramic ZRO2- Angular Contact on the Small Parts and Bearings website.
Bushes - Steel - DU - Split - Flanged
Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.
Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.
Related Information:
There is also a good range of Bushes - Steel - DU - Split - Flanged on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125217 products in 2329 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
