Rod Ends Categories


Category Matches

Rod Ends Plastic

TopHide Pictures

Rod Ends - Plastic - Female
Rod Ends - Plastic - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Plastic - Female.

Rod Ends - Plastic - Male
Rod Ends - Plastic - Male

Search Rating: 100%

Also see combined categories:
All Male Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Plastic - Male.

Rod Ends Stamped

TopHide Pictures

Rod Ends - Steel - Stamped - Female
Rod Ends - Steel - Stamped - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Stamped - Female.

Rod Ends Studded

TopHide Pictures

Rod Ends - Steel - Studded - Nylon Seat - Female
Rod Ends - Steel - Studded - Nylon Seat - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - Nylon Seat - Female.

Rod Ends - Steel - Studded - Nylon Seat - Male
Rod Ends - Steel - Studded - Nylon Seat - Male

Search Rating: 100%

Also see combined categories:
All Male Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - Nylon Seat - Male.

Rod Ends - Steel - Studded - PTFE Seat - Female
Rod Ends - Steel - Studded - PTFE Seat - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - PTFE Seat - Female.

Rod Ends - Steel - Studded - PTFE Seat - Male
Rod Ends - Steel - Studded - PTFE Seat - Male

Search Rating: 100%

Also see combined categories:
All Male Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - PTFE Seat - Male.

Rod Ends - Steel - Studded - Quick Disconnect - Female
Rod Ends - Steel - Studded - Quick Disconnect - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends with Stud

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - Quick Disconnect - Female.

Rod Ends - Steel - Studded - Swaged Construction - Female
Rod Ends - Steel - Studded - Swaged Construction - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends with Stud

Designed for heavy duty service, they come with dirt shield to provide protection against contaminants.

Unique assembly swages metal to retain the ball in cavity resulting in increased pull out and wear resistance. Ball studs are surface hardened. Made of low carbon steel, plated and dichromate treated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - Swaged Construction - Female.

Rod Ends Standard

TopHide Pictures

Rod Ends - Steel - Bronze Lined - Female
Rod Ends - Steel - Bronze Lined - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Bronze Lined - Female.

Rod Ends - Steel - Bronze Lined - Male
Rod Ends - Steel - Bronze Lined - Male

Search Rating: 100%

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Bronze Lined - Male.

Rod Ends - Steel - Nylon Raceway - Female
Rod Ends - Steel - Nylon Raceway - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Also known as Heim Joints


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Nylon Raceway - Female.

Rod Ends - Steel - Nylon Raceway - Male
Rod Ends - Steel - Nylon Raceway - Male

Search Rating: 100%

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Also known as Heim Joints


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Nylon Raceway - Male.

Rod Ends PTFE Lined

TopHide Pictures

Rod Ends - Steel - PTFE Lined - Tight Fit - Female
Rod Ends - Steel - PTFE Lined - Tight Fit - Female

Search Rating: 100%

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - PTFE Lined - Tight Fit - Female.

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Rod Ends - Steel - PTFE Lined - Tight Fit - Male

Search Rating: 100%

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - PTFE Lined - Tight Fit - Male.

Rod Ends Stainless Steel

TopHide Pictures

Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female

Search Rating: 99%

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female.

Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male

Search Rating: 99%

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male.

Shafting General Purpose

TopHide Pictures

Rod - Drill - General
Rod - Drill - General

Search Rating: 90%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - General.

Bar and Rod

TopHide Pictures

Hexagonal Bar - Brass
Hexagonal Bar - Brass

Search Rating: 90%

Also see combined categories:
All Metal Bar - Hexagonal

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Brass.

Square Bar - Brass
Square Bar - Brass

Search Rating: 90%

Also see combined categories:
All Metal Bar - Square

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Square Bar - Brass.

Hexagonal Bar - Carbon Steel
Hexagonal Bar - Carbon Steel

Search Rating: 89%

Also see combined categories:
All Metal Bar - Hexagonal

Saw Cut Ends. Small A/F sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Carbon Steel.

Hexagonal Bar - 303 Stainless
Hexagonal Bar - 303 Stainless

Search Rating: 88%

Also see combined categories:
All Metal Bar - Hexagonal

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Small A/F sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - 303 Stainless.

Rectangular Bar - Brass
Rectangular Bar - Brass

Search Rating: 87%

Also see combined categories:
All Rectangular Bar

Thin and thick brass strip and rectangular profiles

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small sizes may not be perfectly straight.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rectangular Bar - Brass. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rectangular Bar - Brass.

Clevis Joints

TopHide Pictures

Joints - Clevis - Plastic
Joints - Clevis - Plastic

Search Rating: 86%

Also see combined categories:
All Clevis Joints

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Joints - Clevis - Plastic.

Threaded Rod

TopHide Pictures

Threaded Rod - Unthreaded Centre - Steel
Threaded Rod - Unthreaded Centre - Steel

Search Rating: 86%

Also see combined categories:
All Threaded Rod

UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Threaded Rod - Unthreaded Centre - Steel. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Threaded Rod - Unthreaded Centre - Steel.

Bar and Rod

TopHide Pictures

Hexagonal Bar - Titanium Ti-Gr2 - Rolled
Hexagonal Bar - Titanium Ti-Gr2 - Rolled

Search Rating: 86%

Also see combined categories:
All Metal Bar - Hexagonal

Cold rolled hex bar to ASTM B348

Saw Cut Ends.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Titanium Ti-Gr2 - Rolled.

Bungs

TopHide Pictures

Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round

Search Rating: 85%

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bungs and Caps - Reversible - Round.

Bar and Rod

TopHide Pictures

Hexagonal Bar - Titanium Ti-Gr2 - Drawn
Hexagonal Bar - Titanium Ti-Gr2 - Drawn

Search Rating: 85%

Also see combined categories:
All Metal Bar - Hexagonal

Cold rolled and hot drawn hex bar to ASTM B348

Saw Cut Ends.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Titanium Ti-Gr2 - Drawn.

Balls Metallic

TopHide Pictures

Balls - Steel - Bored
Balls - Steel - Bored

Search Rating: 83%

Also see combined categories:
All Metallic Balls - Bored

Bored steel balls as used in steel rod ends.

Hardness: 58-64 Rc. Material: SUJ-2.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Steel - Bored.

Balls Plastic

TopHide Pictures

Balls - Plastic - Bored
Balls - Plastic - Bored

Search Rating: 83%

Also see combined categories:
All Plastic Balls - Bored

Bored acetal balls as used in plastic rod ends.

Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Plastic - Bored.

Eyebolts

TopHide Pictures

Bolts - Eye - Bent Rod - Steel
Bolts - Eye - Bent Rod - Steel

Search Rating: 55%

Also see combined categories:
All Eye Bolts

Not recommended for lifting.

Carbon steel zinc plated. Complete with nut. Rolled threads.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Bent Rod - Steel.

Shafting General Purpose

TopHide Pictures

Rod - Drill Blanks
Rod - Drill Blanks

Search Rating: 52%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill Blanks.

Rod - Drill - A-2 Air Hardening
Rod - Drill - A-2 Air Hardening

Search Rating: 52%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - A-2 Air Hardening.

Rod - Drill - O-1 Oil Hardening
Rod - Drill - O-1 Oil Hardening

Search Rating: 52%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - O-1 Oil Hardening.

Rod - Drill - Oil Hardening - 480 Series
Rod - Drill - Oil Hardening - 480 Series

Search Rating: 52%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - Oil Hardening - 480 Series.

Rod - Drill - S-7 Air Hardening
Rod - Drill - S-7 Air Hardening

Search Rating: 52%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - S-7 Air Hardening.

Rod - Drill - W-1 Water Hardening
Rod - Drill - W-1 Water Hardening

Search Rating: 52%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - W-1 Water Hardening.

Flexible Shaft

TopHide Pictures

Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Search Rating: 51%

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Coupling Ends - Open - Mild Steel.

Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Aluminium
Rod - Round - Aluminium

Search Rating: 51%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Aluminium.

Rod - Round - Brass
Rod - Round - Brass

Search Rating: 51%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Brass. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Brass.

Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Search Rating: 50%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Stainless Steel.

Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Search Rating: 50%

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Soft Metal Packs.

Shaftloc

TopHide Pictures

Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Search Rating: 47%

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shaftloc-tm Sleeves - Single Ended.

Bar and Rod

TopHide Pictures

Bar - H Section - Brass
Bar - H Section - Brass

Search Rating: 47%

Also see combined categories:
All Metal Bar - H Section (300mm Long Only)


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bar - H Section - Brass.

Rectangular Bar - Aluminium
Rectangular Bar - Aluminium

Search Rating: 47%

Also see combined categories:
All Rectangular Bar

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rectangular Bar - Aluminium.

Square Bar - Urethane
Square Bar - Urethane

Search Rating: 47%

Also see combined categories:
All Non Metallic Bar - Square

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Square Bar - Urethane.

Snap Buttons

TopHide Pictures

Snap Buttons - Double End
Snap Buttons - Double End

Search Rating: 47%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snap Buttons - Double End.

Bar and Rod

TopHide Pictures

Tool Steel - 496 Oil Hardening - Flat Stock
Tool Steel - 496 Oil Hardening - Flat Stock

Search Rating: 46%

General purpose tool steel with good wear resistance, durability and machinability

Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tool Steel - 496 Oil Hardening - Flat Stock.

Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Acetal
Rod - Round - Acetal

Search Rating: 45%

Also see combined categories:
All Plastic Rod

Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.41 g/cm3 - Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa / Hardness 80 Rockwell M. Small diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Acetal.

Rod - Round - Carbon Fibre
Rod - Round - Carbon Fibre

Search Rating: 45%

Also see combined categories:
All Non Metallic Rod - Round

High impact light weight carbon fibre for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Carbon Fibre. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Carbon Fibre.

Rod - Round - Glass Fibre
Rod - Round - Glass Fibre

Search Rating: 45%

Also see combined categories:
All Plastic Rod

High impact light weight fibreglass for modelling and kites.

Glass fibre rod is more flexible and less brittle than carbon fibre rod.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Glass Fibre. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Glass Fibre.

Rod - Round - Nylon
Rod - Round - Nylon

Search Rating: 45%

Also see combined categories:
All Plastic Rod

High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Nylon.

Rod - Round - Polyester PETP
Rod - Round - Polyester PETP

Search Rating: 45%

Also see combined categories:
All Plastic Rod

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Polyester PETP.

Rod - Round - PTFE
Rod - Round - PTFE

Search Rating: 45%

Also see combined categories:
All Plastic Rod

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - PTFE.

Rod - Round - Sintered Bronze
Rod - Round - Sintered Bronze

Search Rating: 45%

Also see combined categories:
All Metal Rod - Round

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Sintered Bronze.

Rod - Round - Urethane
Rod - Round - Urethane

Search Rating: 45%

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Urethane.

Snap Buttons

TopHide Pictures

Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Search Rating: 45%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snap Buttons - Single End - Dog Leg.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 119733 products in 2831 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.