Miniature Bearings Australia Pty Ltd

Pulleys Timing T2.5 2.5mm Categories


Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
Pulleys - Timing -  2.500mm Pitch - T2.5 - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore
Pulleys - Timing -  2.500mm Pitch - T2.5 - 6mm Wide - Through Bore

Also see combined categories:
All 2.5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 2.500mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium Alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore on the Small Parts and Bearings website.


You may also be interested in

Belts Timing T2.5 2.5mm


Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 - 10mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 12mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 - 12mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 -  4mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 -  6mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 -  8mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide on the Small Parts and Bearings website.


Pulleys Flanges


Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium
Flanges - Timing Pulley - Suit  2.500mm T2.5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - Idler
Pulleys - Timing - Idler

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners. This category may be available in the new MBA online store at Pulleys - Timing - Idler.

Related Information:

There is also a good range of Pulleys - Timing - Idler on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.


Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
Pulleys - Timing -  2.073mm Pitch - 40DP - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

This category may be available in the new MBA online store at Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  40mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  55mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  85mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - 3mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT - 3mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 2mm Pitch Timing Belts.Use with GT2 or GT3 type belts.

Aluminium Alloy. Finished Bores with Set Screws. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 3mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 3mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - EZ-Lock
Pulleys - Timing -  2.000mm Pitch - GT - 6mm Wide - EZ-Lock

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Use with GT2 or GT3 type belts.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - EZ-Lock.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - EZ-Lock on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Insert
Pulleys - Timing -  2.000mm Pitch - GT - 6mm Wide - Plastic - Insert

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Insert.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Insert on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT - 6mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Use with GT2 or GT3 type belts.

Aluminium Alloy. Set Screw and EZI-LOK Hubs. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - 9mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT - 9mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide. Use with GT2 or GT3 type belts.

Aluminium Alloy. Set Screw Locking. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless
Pulleys - Timing -  2.000mm Pitch - GT - STOCK - 304 Stainless

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium
Pulleys - Timing -  2.000mm Pitch - GT - STOCK - Aluminium

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - 15mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT - 15mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide. Use with GT2 or GT3 type belts.

Aluminium Alloy. Finsihed through bore. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 15mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT -  6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide. Use with GT2 or GT3 type belts.

Aluminium Alloy. Finished through bore ready to assemble. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 6mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT -  9mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. Use with GT2 or GT3 type belts.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - EZ-Lock.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - EZ-Lock on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - GT -  9mm Wide - Plastic - Insert

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Insert on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Plain
Pulleys - Timing -  3.000mm Pitch - GT -  9mm Wide - Plastic - Plain

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. No locking device. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Plain.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT -  9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. Use with GT2 or GT3 type belts.

Finished through bore ready for assembly. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - GT - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT - 15mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT - 15mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT - 25mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.

Black oxide coated steel with unfinished bores. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT -  9mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - GT - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel
Pulleys - Timing -  5.000mm Pitch - GT - STOCK - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 12mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore
Pulleys - Timing -  8.000mm Pitch - GT - 12mm Wide  - Through Bore

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Pilot bored. Use with GT2 or GT3 type belts.

Black oxide coated steel. No locking. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 229438 products in 2170 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 229438 products in 2170 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.