Miniature Bearings Australia Pty Ltd

Pulleys Timing Htd 8mm Categories


Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.


You may also be interested in

Pulleys Timing GT2 8mm


Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Through Bore
Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Through Bore

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Pilot bored. Use with GT2 or GT3 type belts.

Black oxide coated steel. No locking. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Through Bore
Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Through Bore

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black oxide coated steel. No locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing HTD 3mm


Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - EZ-Lock
Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

This category may be available in the new MBA online store at Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - EZ-Lock.

Related Information:

There is also a good range of Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - EZ-Lock on the Small Parts and Bearings website.


Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - Through Bore
Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 3.000mm Pitch HTD - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves. This category may be available in the new MBA online store at Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Hubless.

Related Information:

There is also a good range of Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Hubless on the Small Parts and Bearings website.


Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Insert
Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Insert

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.

This category may be available in the new MBA online store at Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Insert.

Related Information:

There is also a good range of Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Insert on the Small Parts and Bearings website.


Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Through Bore
Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing HTD 5mm


Pulleys - Timing 5.000mm Pitch HTD - 15mm Wide - Through Bore
Pulleys - Timing 5.000mm Pitch HTD - 15mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium Alloy. Finished bore with set screw locking. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch HTD - 15mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 5.000mm Pitch HTD - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Plastic - Fairloc Hub
Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Plastic - Fairloc Hub

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Fairloc locking hub.


Related Information:

There is also a good range of Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Plastic - Fairloc Hub on the Small Parts and Bearings website.


Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Plastic - Plain
Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Plastic - Plain

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. No locking device.

This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Plastic - Plain.

Related Information:

There is also a good range of Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Through Bore
Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 5.000mm Pitch HTD - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing HTD 3mm


Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing HTD 5mm


Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.


Pulleys Flanges


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing GT2 -14mm


Pulleys - Timing 14.000mm Pitch GT - 115mm Wide - Taperlock
Pulleys - Timing 14.000mm Pitch GT - 115mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 115mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 115mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 14.000mm Pitch GT - 170mm Wide - Taperlock
Pulleys - Timing 14.000mm Pitch GT - 170mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 170mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 170mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 14.000mm Pitch GT - 40mm Wide - Taperlock
Pulleys - Timing 14.000mm Pitch GT - 40mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 40mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 40mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 14.000mm Pitch GT - 55mm Wide - Taperlock
Pulleys - Timing 14.000mm Pitch GT - 55mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 55mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 55mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 14.000mm Pitch GT - 85mm Wide - Taperlock
Pulleys - Timing 14.000mm Pitch GT - 85mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 85mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys Timing AT5 5mm


Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium
Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium on the Small Parts and Bearings website.


Pulleys Timing 40DP LT Pitch


Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore
Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble. This category may be available in the new MBA online store at Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing H Pitch 12.7mm


Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Taperlock
Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 50.8mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Through Bore
Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Through Bore

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.

Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing XL Pitch 5.08mm


Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium
Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel
Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing 5.080mm Pitch XL - 6.4mm Wide - Through Bore
Pulleys - Timing 5.080mm Pitch XL - 6.4mm Wide - Through Bore

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished bore with set screw locking. This category may be available in the new MBA online store at Pulleys - Timing 5.080mm Pitch XL - 6.4mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 5.080mm Pitch XL - 6.4mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Plastic - Insert
Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Plastic - Insert

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.

This category may be available in the new MBA online store at Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Plastic - Insert.

Related Information:

There is also a good range of Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Plastic - Insert on the Small Parts and Bearings website.


Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Through Bore
Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Through Bore

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 5.080mm Pitch XL - 9.5mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing 40DP LT Pitch


Pulleys - Timing 2.073mm Pitch 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing 2.073mm Pitch 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.

This category may be available in the new MBA online store at Pulleys - Timing 2.073mm Pitch 40DP - 6.4mm Wide - Plastic - Plain.

Related Information:

There is also a good range of Pulleys - Timing 2.073mm Pitch 40DP - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing 2.073mm Pitch 40DP - 7.9mm Wide - Through Bore
Pulleys - Timing 2.073mm Pitch 40DP - 7.9mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble. This category may be available in the new MBA online store at Pulleys - Timing 2.073mm Pitch 40DP - 7.9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 2.073mm Pitch 40DP - 7.9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing AT10 10mm


Pulleys - Timing 10.000mm Pitch AT10 - 16mm Wide - Through Bore
Pulleys - Timing 10.000mm Pitch AT10 - 16mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore. This category may be available in the new MBA online store at Pulleys - Timing 10.000mm Pitch AT10 - 16mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 10.000mm Pitch AT10 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 10.000mm Pitch AT10 - 25mm Wide - Through Bore
Pulleys - Timing 10.000mm Pitch AT10 - 25mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore. This category may be available in the new MBA online store at Pulleys - Timing 10.000mm Pitch AT10 - 25mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 10.000mm Pitch AT10 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 10.000mm Pitch AT10 - 32mm Wide - Through Bore
Pulleys - Timing 10.000mm Pitch AT10 - 32mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore. This category may be available in the new MBA online store at Pulleys - Timing 10.000mm Pitch AT10 - 32mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 10.000mm Pitch AT10 - 32mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 10.000mm Pitch AT10 - 50mm Wide - Through Bore
Pulleys - Timing 10.000mm Pitch AT10 - 50mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore. This category may be available in the new MBA online store at Pulleys - Timing 10.000mm Pitch AT10 - 50mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 10.000mm Pitch AT10 - 50mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing AT5 5mm


Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore
Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore
Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.