Miniature Bearings Australia Pty Ltd

Searched For: Pulleys Timing Htd 5mm Categories


Pulleys Timing HTD 5mm


Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - HTD -  15mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium Alloy. Finished bore with set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain
Pulleys - Timing -  5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. No locking device.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - HTD - 9mm Wide  - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Fairloc Hub
Pulleys - Timing -  5.000mm Pitch - HTD - 9mm Wide - Plastic - Fairloc Hub

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Fairloc locking hub.


Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Fairloc Hub on the Small Parts and Bearings website.


You may also be interested in

Pulleys Timing AT5 5mm


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys Timing GT2 -14mm


Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  55mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  85mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys Timing GT2 8mm


Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 85mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys Timing GT2 5mm


Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - GT - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys Timing T5 5mm


Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - T5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys Timing GT2 5mm


Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT - 15mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT - 25mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel
Pulleys - Timing -  5.000mm Pitch - GT - STOCK - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing AT5 5mm


Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing GT2 5mm


Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT - 15mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.

Black oxide coated steel with unfinished bores. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT -  9mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing T5 5mm


Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 25.0mm to 25.4mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing HTD 3mm


Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.


Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing HTD 8mm


Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  8.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  8.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys Flanges


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  8.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  8.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing GT2 -14mm


Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  40mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys Timing GT2 8mm


Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 12mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 20mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 30mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 50mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore
Pulleys - Timing -  8.000mm Pitch - GT - 12mm Wide  - Through Bore

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Pilot bored. Use with GT2 or GT3 type belts.

Black oxide coated steel. No locking. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore
Pulleys - Timing -  8.000mm Pitch - GT - 50mm Wide  - Through Bore

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black oxide coated steel. No locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing L Pitch 9.53mm


Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 218356 products in 2137 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 218356 products in 2137 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.