Pulleys Timing Gt2 3mm Categories
Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT - 15mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. Finsihed through bore. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 15mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 15mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT - 6mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. Finished through bore ready to assemble. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 6mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 6mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - EZ-Lock
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - EZ-Lock.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - EZ-Lock on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Insert
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Insert on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Plain
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. No locking device. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Plain.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Plastic - Plain on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. Use with GT2 or GT3 type belts.
Finished through bore ready for assembly. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - 9mm Wide - Through Bore on the Small Parts and Bearings website.
You may also be interested in
Pulleys Timing GT2 2mm
Pulleys - Timing - 2.000mm Pitch - GT - 3mm Wide - Through Bore
Timing Pulleys to suit GT 2mm Pitch Timing Belts.Use with GT2 or GT3 type belts.
Aluminium Alloy. Finished Bores with Set Screws. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 3mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 3mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys Timing GT2 5mm
Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys Timing GT2 -14mm
Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys Timing GT2 2mm
Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless on the Small Parts and Bearings website.
Pulleys Timing GT2 5mm
Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel on the Small Parts and Bearings website.
Pulleys Timing GT2 8mm
Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide. Use with GT2 or GT3 type belts.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide. Use with GT2 or GT3 type belts.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide. Use with GT2 or GT3 type belts.
Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys Timing GT2 2mm
Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - EZ-Lock
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - EZ-Lock.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - EZ-Lock on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Insert
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Insert.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Insert on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Plain
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. No locking device. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Plain.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Plastic - Plain on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. Set Screw and EZI-LOK Hubs. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 6mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT - 9mm Wide - Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. Set Screw Locking. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - 9mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - 9mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys Timing GT2 5mm
Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.
Black oxide coated steel with unfinished bores. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron. Use with GT2 or GT3 type belts.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - 9mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys Timing GT2 8mm
Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Pilot bored. Use with GT2 or GT3 type belts.
Black oxide coated steel. No locking. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.
Black oxide coated steel. No locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys Flanges
Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium
Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium.
Related Information:
There is also a good range of Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium on the Small Parts and Bearings website.
Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium
Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium.
Related Information:
There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium on the Small Parts and Bearings website.
Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium
Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium.
Related Information:
There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium on the Small Parts and Bearings website.
Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel
Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel.
Related Information:
There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel on the Small Parts and Bearings website.
Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel
Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel.
Related Information:
There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel on the Small Parts and Bearings website.
Pulleys Timing T01 1mm
Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy. With set screw. This category may be available in the new MBA online store at Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys Timing HTD 3mm
Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Aluminium alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.
Suitable for use with shaftloc sleeves.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Aluminium alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore on the Small Parts and Bearings website.
Belts Timing GT2 2mm
Belts - Timing - 2.000mm Pitch - GT - 3mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 3mm Wide on the Small Parts and Bearings website.
Belts Timing GT2 3mm
Belts - Timing - 3.000mm Pitch - GT - 15mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 15mm Wide on the Small Parts and Bearings website.
Belts - Timing - 3.000mm Pitch - GT - 6mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 6mm Wide on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Catalogue
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Charity
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
McMaster Carr Cross Reference PDF
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 209441 products in 2115 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
