Miniature Bearings Australia Pty Ltd

Pulleys Flanges Categories


Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel
Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium
Flanges - Timing Pulley - Suit  1.000mm Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium
Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel
Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium
Flanges - Timing Pulley - Suit  2.000mm GT Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series
Flanges - Timing Pulley - Suit  2.032mm MXL and 40DP Series

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium
Flanges - Timing Pulley - Suit  2.500mm T2.5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm GT Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm GT Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm GT Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm GT Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm T5 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium
Flanges - Timing Pulley - Suit  5.080mm XL Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.080mm XL Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  8.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  8.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium
Flanges - Timing Pulley - Suit  9.525mm L Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel
Flanges - Timing Pulley - Suit  9.525mm L Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel on the Small Parts and Bearings website.


You may also be interested in

Pulleys Timing AT10 10mm


Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys Timing HTD 3mm


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless on the Small Parts and Bearings website.


Pulleys Timing MXL Pitch


Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With brass insert.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert on the Small Parts and Bearings website.


Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. No locking device.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With aluminium hub.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub on the Small Parts and Bearings website.


Pulleys Timing 40DP LT Pitch


Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.


Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Locking Assemblies


Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

There is also a good range of Assemblies - Locking - Flanged on the Small Parts and Bearings website.


Pulleys Timing AT5 5mm


Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium on the Small Parts and Bearings website.


Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened. This category may be available in the new MBA online store at Tensioner - Drive - Adjustable Flanged.

Related Information:

There is also a good range of Tensioner - Drive - Adjustable Flanged on the Small Parts and Bearings website.


Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed. This category may be available in the new MBA online store at Pulleys - Blocks - Eye - Swivel.

There is also a good range of Pulleys - Blocks - Eye - Swivel on the Small Parts and Bearings website.


Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.

This category may be available in the new MBA online store at Pulleys - Geared - Hobby.

There is also a good range of Pulleys - Geared - Hobby on the Small Parts and Bearings website.


Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings. This category may be available in the new MBA online store at Pulleys - U Groove - Idler - Plastic - With Ball Bearing.

Related Information:

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on the Small Parts and Bearings website.


Pulleys - U Groove - Idler - Plastic - With Plain Bore
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings. This category may be available in the new MBA online store at Pulleys - U Groove - Idler - Plastic - With Plain Bore.

Related Information:

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on the Small Parts and Bearings website.


Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings. This category may be available in the new MBA online store at Pulleys - U Groove - Idler - Steel - With Bearing.

Related Information:

There is also a good range of Pulleys - U Groove - Idler - Steel - With Bearing on the Small Parts and Bearings website.


Pulleys - Timing - Idler
Pulleys - Timing - Idler

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners. This category may be available in the new MBA online store at Pulleys - Timing - Idler.

Related Information:

There is also a good range of Pulleys - Timing - Idler on the Small Parts and Bearings website.


Pulleys - Poly V - J Section - QD Bush
Pulleys - Poly V - J Section - QD Bush


Use with QD bush to suit your bore requirement

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height. This category may be available in the new MBA online store at Pulleys - Poly V - J Section - QD Bush.

Related Information:

There is also a good range of Pulleys - Poly V - J Section - QD Bush on the Small Parts and Bearings website.


Pulleys - Poly V - J Section - Through Bored
Pulleys - Poly V - J Section - Through Bored


Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height. This category may be available in the new MBA online store at Pulleys - Poly V - J Section - Through Bored.

Related Information:

There is also a good range of Pulleys - Poly V - J Section - Through Bored on the Small Parts and Bearings website.


Pulleys - Vee - A - 4L - Single Row - For QD Bushing
Pulleys - Vee - A - 4L - Single Row - For QD Bushing

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.

This category may be available in the new MBA online store at Pulleys - Vee - A - 4L - Single Row - For QD Bushing.

Related Information:

There is also a good range of Pulleys - Vee - A - 4L - Single Row - For QD Bushing on the Small Parts and Bearings website.


Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium
Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Stenco vee pulleys

This category may be available in the new MBA online store at Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium.

Related Information:

There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium on the Small Parts and Bearings website.


Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed. This category may be available in the new MBA online store at Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron.

Related Information:

There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.


Pulleys - Vee - B - 5L - Single Row - For QD Bushing
Pulleys - Vee - B - 5L - Single Row - For QD Bushing

Also see combined categories:
All Vee Pulleys B Section 15.9 and 16.5mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.

This category may be available in the new MBA online store at Pulleys - Vee - B - 5L - Single Row - For QD Bushing.

Related Information:

There is also a good range of Pulleys - Vee - B - 5L - Single Row - For QD Bushing on the Small Parts and Bearings website.


Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium
Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Stenco vee pulleys

This category may be available in the new MBA online store at Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium.

Related Information:

There is also a good range of Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.