Miniature Bearings Australia Pty Ltd

Pulleys Flanges Categories

Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel
Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium
Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium
Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel
Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 2.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit 2.000mm GT2 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
304 Stainless Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 2.000mm GT2 Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series
Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
MXL Pulley Stock
40 DP Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium
Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Carbon Steel
Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Carbon Steel
Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.000mm T5 Series - Aluminium
Flanges - Timing Pulley - Suit 5.000mm T5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm T5 Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel
Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium
Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel
Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium
Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Aluminium Timing Pulley Stock
Carbon Steel Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium on the Small Parts and Bearings website.

Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel
Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:
Carbon Steel Timing Pulley Stock
Aluminium Timing Pulley Stock

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel on the Small Parts and Bearings website.

You may also be interested in

Pulleys Timing AT5 5mm


Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys - 10mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys - 16mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys - 25mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys Timing AT10 10mm


Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:
Belts to suit 10.000 Pitch AT Pulleys
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:
Belts to suit 10.000 Pitch AT Pulleys
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:
Belts to suit 10.000 Pitch AT Pulleys
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT10 Series belts

Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.

Related Information:
Belts to suit 10.000 Pitch AT Pulleys
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys Timing AT5 5mm


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys
Aluminium Flanges to suit AT 5mm series pulley stock
Steel Flanges to suit AT 5mm series pulley stock

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium on the Small Parts and Bearings website.

Pulleys Timing HTD 3mm


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:
Belts to suit 3.000 Pitch HTD Pulleys - 9mm wide
Double Sided Belts to suit 3.000 Pitch HTD Pulleys - 9mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless on the Small Parts and Bearings website.

Pulleys Timing MXL Pitch


Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert
Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With brass insert.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:
Belts to suit 2.032 Pitch MXL Pulleys - 6mm wide
Double Sided Belts to suit 2.032 Pitch MXL Pulleys - 6mm wide
Tru-Motion Belts to suit 2.032 Pitch MXL Pulleys - 6mm Wide

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert on the Small Parts and Bearings website.

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain
Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. No locking device.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:
Belts to suit 2.032 Pitch MXL Pulleys - 6mm wide
Double Sided Belts to suit 2.032 Pitch MXL Pulleys - 6mm wide
Tru-Motion Belts to suit 2.032 Pitch MXL Pulleys - 6mm Wide

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub
Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With aluminium hub.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:
Belts to suit 2.032 Pitch MXL Pulleys - 6mm wide
Double Sided Belts to suit 2.032 Pitch MXL Pulleys - 6mm wide
Tru-Motion Belts to suit 2.032 Pitch MXL Pulleys - 6mm Wide

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub on the Small Parts and Bearings website.

Pulleys Timing 40DP LT Pitch


Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.


Related Information:
Belts to suit 2.073 Pitch 40DP Pulleys - 6mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.

Tensioners


Tensioner - Fixed Flanged
Tensioner - Fixed Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Fixed Flanged on the Small Parts and Bearings website.

Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Drive - Adjustable Flanged on the Small Parts and Bearings website.

Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.

There is also a good range of Pulleys - Blocks - Eye - Swivel on the Small Parts and Bearings website.

Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.


There is also a good range of Pulleys - Geared - Hobby on the Small Parts and Bearings website.

Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on the Small Parts and Bearings website.

Pulleys - U Groove - Idler - Plastic - With Plain Bore
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on the Small Parts and Bearings website.

Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Idler - Steel - With Bearing on the Small Parts and Bearings website.

Pulleys - Timing - Idler
Pulleys - Timing - Idler

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:
Tensioners
Timing Belts (See types under T)
Idler Shafts

There is also a good range of Pulleys - Timing - Idler on the Small Parts and Bearings website.

Pulleys - Poly V - J Section - QD Bush
Pulleys - Poly V - J Section - QD Bush


Use with QD bush to suit your bore requirement

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.

Related Information:
Poly Vee Belts to Suit J Section Pulleys
Poly Vee Pulleys with Through Bore
Poly Vee Belts and Bushes PDF Catalogue

There is also a good range of Pulleys - Poly V - J Section - QD Bush on the Small Parts and Bearings website.

Pulleys - Poly V - J Section - Through Bored
Pulleys - Poly V - J Section - Through Bored


Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.

Related Information:
Poly Vee Belts to Suit J Section Pulleys
Poly Vee Pulleys with QD Bush Bore
Poly Vee Belts and Bushes PDF Catalogue

There is also a good range of Pulleys - Poly V - J Section - Through Bored on the Small Parts and Bearings website.

Pulleys - Vee - A - 4L - Single Row - For QD Bushing
Pulleys - Vee - A - 4L - Single Row - For QD Bushing

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.


Related Information:
A /4L Section Vee Belts
Type H QD Bushings

There is also a good range of Pulleys - Vee - A - 4L - Single Row - For QD Bushing on the Small Parts and Bearings website.

Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium
Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Stenco vee pulleys


Related Information:
A / 4L Section Vee Belts

There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium on the Small Parts and Bearings website.

Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed.

Related Information:
A /4L Section Vee Belts

There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.

Pulleys - Vee - B - 5L - Single Row - For QD Bushing
Pulleys - Vee - B - 5L - Single Row - For QD Bushing

Also see combined categories:
All Vee Pulleys B Section 15.9 and 16.5mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.


Related Information:
B / 5L Section Vee Belts
Type H QD Bushings

There is also a good range of Pulleys - Vee - B - 5L - Single Row - For QD Bushing on the Small Parts and Bearings website.

Main Pages

About Us

About Us
 Balls List

Balls List
 Bearings List

Bearings List
 Brands

Brands
 Bulk Offers

Bulk Offers
 Catalogue

Catalogue
 Clearance Items List

Clearance Items List
 Contact Us

Contact Us
 Charity

Charity
 Dental Bearings

Dental Bearings
 Distributor Locations

Distributor Locations
 China

China
 Dowel Pins

Dowel Pins
 Freight Rates and Shipping Times

Freight Rates and Shipping Times
 Frequently Asked Questions

Frequently Asked Questions
 Games Clearance

Games Clearance
 Google Search

Google Search
 Hobby Clearance

Hobby Clearance
 Hobby Information

Hobby Information
 Large Bearings

Large Bearings
 Mailorder Form

Mailorder Form
 Order History

Order History
 Ordering

Ordering
 Payment and Shipping

Payment and Shipping
 Privacy

Privacy
 Product Showcase

Product Showcase
 Shipping Rates and Times

Shipping Rates and Times
 Technical

Technical
 Terms

Terms


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

 
About Us Balls List Bearings List Bearings and Balls Brands Bulk Offers Catalogue
Paypal Accepted
Paypal
Secure Checkout
Charity China Clamping and Locking Clearance Items List Contact Us Control Products Dental Bearings Dental
Visa Card Accepted
Visa
Secure Checkout
Distributor Locations Dowel Pins Fasteners Freight Rates and Shipping Times Frequently Asked Questions Games Clearance (Link) Games and Toys Gears
Master Card Accepted
Mastercard
Secure Checkout
Google Search Hobby Clearance (Link) Hobby Information Kits Large Bearings (Link) Linear Bearings and Systems Literature Lubricants
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Magnets Mailorder Form Materials Miscellaneous Order History Ordering Packing and Display Payment and Shipping
Amex Accepted
Amex
Secure Checkout
Power Transmission Privacy Product Showcase Seals Shaft Couplings Shafting Shipping Rates and Times Springs and Retraction
Paypal Accepted
Paypal
Secure Checkout
Storage Technical Terms Timing Belts and Pulleys Tools Vibration Control

Products

Air Springs Allthread Assortments Backup Rings Ball Joints Ball Parallels Ball Screw Accessories Ball Screws 16mm SDP Ball Screws Ground
Paypal Accepted
Paypal
Secure Checkout
Ball Screws Nook Series Ball Screws Rolled Ball Splines Linear Ball Transfers Balls Ceramic Balls Metallic Balls Plastic Balls Rubber Balsa Wood Bar and Rod
Visa Card Accepted
Visa
Secure Checkout
Batteries Bearings Acetal Plastic Bearings Angular Contact Bearings Ceramic Bearings Conveyor Bearings Double Row Ball Bearings Flanged Ball Bearings Grooved Profile Bearings Housings Bearings Hydrodynamic
Master Card Accepted
Mastercard
Secure Checkout
Bearings Mounted Bearings Needle Roller Bearings One Way Clutch Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Single Row Ball Bearings Special Purpose
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Bearings Stainless Special Grades Bearings Tapered Roller Bearings Thrust Bearings and Housings Insert Bearings for Dental Equipment Bearings for Housings Bearings for Skating Bearings for Wheelbarrows Belts Poly Vee Belts Posi-Drive
Amex Accepted
Amex
Secure Checkout
Belts Rounthane Belts Timing 40DP LT Pitch Belts Timing AT10 10mm Belts Timing AT5 5mm Belts Timing GT2 -14mm Belts Timing GT2 2mm Belts Timing GT2 3mm Belts Timing GT2 5mm Belts Timing GT2 8mm Belts Timing H Pitch 12.7mm
Paypal Accepted
Paypal
Secure Checkout
Belts Timing HTD -14mm Belts Timing HTD 3mm Belts Timing HTD 5mm Belts Timing HTD 8mm Belts Timing L Pitch 9.53mm Belts Timing MXL Pitch Belts Timing T01 1mm Belts Timing T015 1.5mm Belts Timing T10 10mm Belts Timing T2.5 2.5mm
Visa Card Accepted
Visa
Secure Checkout
Belts Timing T5 5mm Belts Timing XL Pitch 5.08mm Books Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Ties
Master Card Accepted
Mastercard
Secure Checkout
Cable Cam Followers Cams Castors Accessories Castors Plate Castors Stud Catalogues Catches Chain and Sprockets Ladder Chain and Sprockets Roller
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches Collars Couplings Bellows
Amex Accepted
Amex
Secure Checkout
Couplings Disk Couplings Geargrip Couplings Helical and Slit Couplings Insert and Jaw Couplings K Type Couplings Other Couplings Rigid Couplings Sleeve Cross Blocks Dampers
Paypal Accepted
Paypal
Secure Checkout
Dental Bearing Kits Drylin Bearings and Systems Dual Eye Joints Dual Vee Bearings Dubro Accessories Electrical Wire Engineering and Hobby Rod Eyebolts Fastening Bushings Flexible Shaft
Visa Card Accepted
Visa
Secure Checkout
Foam Framing Fuel Gas Springs Gear Blanks Gear Racks Flexible Gearboxes Cross Axis Gearboxes Right Angle Gearboxes Tee Gearheads Inline
Master Card Accepted
Mastercard
Secure Checkout
Gearmotors Basic Gearmotors DC Gearmotors Open Gears Inch Bevel Gears Inch Mitre Gears Inch Racks Gears Inch Spur Gears Inch Worms Gears Metric Bevel Gears Metric Mitre
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Gears Metric Racks Gears Metric Spiral Mitre Gears Metric Spur Gears Metric Worms Gifts Handles Handpiece Parts Hobby Accessories Hobby Gears
Amex Accepted
Amex
Secure Checkout
Hobby Servo Motors Hobby Shafting Hobby Wheels Hoist Rings Housings with Bearing Hubs Insulator Strips Insulators Isolators Keys and Keysteel
Paypal Accepted
Paypal
Secure Checkout
Keys Kites Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval
Visa Card Accepted
Visa
Secure Checkout
Knobs Precision Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Valve Lanyards Latches Compression Latches Draw Latches Handle
Master Card Accepted
Mastercard
Secure Checkout
Latches Other Latches Quarter Turn Latches Rotary Action Latches Slam Action Lazy Susans Leads and Connectors Leadscrews Lights Linear Bearing Housings Linear Bearings with Housing
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Linear Bearings Linear Slides Locking Bushings Lubricants General Purpose Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Marking
Amex Accepted
Amex
Secure Checkout
Measuring Equipment Measuring Gauges Motors DC Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical
Paypal Accepted
Paypal
Secure Checkout
Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Dome Nuts Hex Nuts Lock Nuts Specialty Nuts Thumb
Visa Card Accepted
Visa
Secure Checkout
Nuts Wing O-Rings for Dental Applications O-Rings Oil Seals Oils Specialised Packing Boxes and Materials Pillars Pinion Wire Imperial Pins Ball Lock Pins Clevis
Master Card Accepted
Mastercard
Secure Checkout
Pins Cotter Pins Dowel Pins General Pins Locating Pins Pull Pins Roll Pins Taper Pins Wirelock Plungers Ball Plungers Indexing
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Plungers Spring Plywood Positioning Pressure Rollers Pulley Blocks Pulleys Flanges Pulleys Grooved Pulleys Idler Pulleys Poly Vee Pulleys Timing 40DP LT Pitch
Amex Accepted
Amex
Secure Checkout
Pulleys Timing AT10 10mm Pulleys Timing AT5 5mm Pulleys Timing GT2 -14mm Pulleys Timing GT2 2mm Pulleys Timing GT2 3mm Pulleys Timing GT2 5mm Pulleys Timing GT2 8mm Pulleys Timing H Pitch 12.7mm Pulleys Timing HTD 3mm Pulleys Timing HTD 5mm
Paypal Accepted
Paypal
Secure Checkout
Pulleys Timing HTD 8mm Pulleys Timing L Pitch 9.53mm Pulleys Timing MXL Pitch Pulleys Timing T01 1mm Pulleys Timing T10 10mm Pulleys Timing T2.5 2.5mm Pulleys Timing T5 5mm Pulleys Timing XL Pitch 5.08mm Pulleys Vee Punches
Visa Card Accepted
Visa
Secure Checkout
RC Boats and Accessories RC Car and Buggy Wheels RC Engine Parts RC Filters RC Nitro Accessories RC Propellers and Adaptors RC Spare Parts Ratchets and Pawls Robotic Wheels Rod Ends PTFE Lined
Master Card Accepted
Mastercard
Secure Checkout
Rod Ends Plastic Rod Ends Stainless Steel Rod Ends Stamped Rod Ends Standard Rod Ends Studded Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Screws Coach Screws Countersunk Screws Grub Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping
Amex Accepted
Amex
Secure Checkout
Screws Shoulder Screws Square Head Screws Thumb Screws Wood Screws Sealing Plugs Seals and Sealing Sets Shaft Extenders and Reducers Shafting Aluminium
Paypal Accepted
Paypal
Secure Checkout
Shafting General Purpose Shafting Precision Ground Shaftloc Sheet Metallic Sheet Non Metallic Shim Shock Absorbers Sleeves Snap Buttons Snaps
Visa Card Accepted
Visa
Secure Checkout
Soldering Spacers Spare Part Boxes Spinners Spring Anchors Spring Motors Spring Mounts Spring Reels Spring Washers Spring Wire
Master Card Accepted
Mastercard
Secure Checkout
Springs Compression Springs Constant Force Springs Die Springs Disc Springs Extension Springs General Springs Torsion Spur Gear Stock Inch Square Shaft Stays
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Stops Spring Strip Stroke Rotary Bushings Studs Suction Cups Switches Tape Tee Joints Tension Bushings Tensioners
Amex Accepted
Amex
Secure Checkout
Thread Inserts Threaded Rod Timing Belt Lengths Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Cutting
Paypal Accepted
Paypal
Secure Checkout
Tools Deburring Tools General Tools Measuring Tools Pullers Tools Screw Extractors Tools Threading Tube and Tubing Turntables Universal Joint Covers Universal Joints Double
Visa Card Accepted
Visa
Secure Checkout
Universal Joints Single Universal Joints Telescoping V-Rings Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber
Master Card Accepted
Mastercard
Secure Checkout
Washers General Washers Lock Washers Locking Washers Serrated Locking Washers Shoulder Washers Square Wear Strips Wheels Industrial Wheels RC Plane Wrenches
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Yoke Ends

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.