Pulley Blocks Categories
Pulleys - Blocks - Eye - Swivel
Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.
Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.
There is also a good range of Pulleys - Blocks - Eye - Swivel on the Small Parts and Bearings website.
Pulleys - Geared - Hobby
Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.
There is also a good range of Pulleys - Geared - Hobby on the Small Parts and Bearings website.
Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Plastic and Steel with Steel Ball Bearings or Plain Bearings.
Use with round belts such as Rounthane or O-Rings.
Related Information:
There is also a good range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on the Small Parts and Bearings website.
Pulleys - U Groove - Idler - Plastic - With Plain Bore
Plastic and Steel with Steel Ball Bearings or Plain Bearings.
Use with round belts such as Rounthane or O-Rings.
Related Information:
There is also a good range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on the Small Parts and Bearings website.
Pulleys - U Groove - Idler - Steel - With Bearing
Steel with Steel Ball Bearings
Use with round belts such as Rounthane or O-Rings.
Related Information:
There is also a good range of Pulleys - U Groove - Idler - Steel - With Bearing on the Small Parts and Bearings website.
Pulleys - Timing - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Related Information:
There is also a good range of Pulleys - Timing - Idler on the Small Parts and Bearings website.
Pulleys - Poly V - J Section - QD Bush
Use with QD bush to suit your bore requirement
Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.
Related Information:
There is also a good range of Pulleys - Poly V - J Section - QD Bush on the Small Parts and Bearings website.
Pulleys - Poly V - J Section - Through Bored
Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.
Related Information:
There is also a good range of Pulleys - Poly V - J Section - Through Bored on the Small Parts and Bearings website.
Pulleys - Vee - A - 4L - Single Row - For QD Bushing
Cast iron pulleys. QD bushings are used to vary the bore sizes.
Related Information:
There is also a good range of Pulleys - Vee - A - 4L - Single Row - For QD Bushing on the Small Parts and Bearings website.
Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium
Stenco vee pulleys
Related Information:
There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium on the Small Parts and Bearings website.
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Dual purpose pulleys suit A section and M section belts
To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed.
Related Information:
There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.
Pulleys - Vee - B - 5L - Single Row - For QD Bushing
Cast iron pulleys. QD bushings are used to vary the bore sizes.
Related Information:
There is also a good range of Pulleys - Vee - B - 5L - Single Row - For QD Bushing on the Small Parts and Bearings website.
Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium
Stenco vee pulleys
Related Information:
There is also a good range of Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium on the Small Parts and Bearings website.
Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron
Dual purpose pulleys suit A section and M section belts
To determine the pitch diameter for A section add 8.636mm (0.34 inch) to the pitch diameter listed.
Related Information:
There is also a good range of Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.
Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.
Aluminium Alloy. Finished Through Bore Ready To Assemble.
Related Information:
There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.
Related Information:
There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.
Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.
Aluminium Alloy. Finished Through Bore Ready To Assemble.
Related Information:
There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.
Related Information:
There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
HTD 5mm series Flanges can be used with this stock.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT2 - 115mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT2 - 115mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT2 - 170mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT2 - 170mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT2 - 40mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock
Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT2 - 40mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT2 - 55mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT2 - 55mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 14.000mm Pitch - GT2 - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
There is also a good range of Pulleys - Timing - 14.000mm Pitch - GT2 - 85mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore
Timing Pulleys to suit GT 2mm Pitch Timing Belts.
Aluminium Alloy. Finished Bores with Set Screws.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.
Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Insert
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Insert on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Plain
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. No locking device.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Plain on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.
Aluminium Alloy. Set Screw and EZI-LOK Hubs.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.
Aluminium Alloy. Set Screw Locking.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - 304 Stainless
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - 304 Stainless on the Small Parts and Bearings website.
Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.
Aluminium Alloy. Finsihed through bore. Set screw locking.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.
Aluminium Alloy. Finished through bore ready to assemble.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.
Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Insert
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Insert on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Plain
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. No locking device.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Plain on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.
Finished through bore ready for assembly. Set screw locking.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Taperlock on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
