Miniature Bearings Australia Pty Ltd

Protective Packing And Sleeves Categories


Sleeving - Mesh
Sleeving - Mesh


Low cost protection for threaded and cylindrical parts

Elastic snug tight fit protective sleeve fits over straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).

There is also a good range of Sleeving - Mesh on the Small Parts and Bearings website.


Screws - Thumb - Knurled - Brass
Screws - Thumb - Knurled  - Brass

Also see combined categories:
All Thumb Screws

Brass knurled head thumb screws with zinc or black oxide protective coating.

This category may be available in the new MBA online store at Screws - Thumb - Knurled - Brass.

Related Information:

There is also a good range of Screws - Thumb - Knurled - Brass on the Small Parts and Bearings website.


Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:

There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.


Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit
Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.

There is also a good range of Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit on the Small Parts and Bearings website.


Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit
Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.

There is also a good range of Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit on the Small Parts and Bearings website.


Sleeves - Adaptor - H200
Sleeves - Adaptor - H200

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 1204K to 1222K tapered bore Self aligning ball bearing. This category may be available in the new MBA online store at Sleeves - Adaptor - H200.

Related Information:


Sleeves - Adaptor - H2300
Sleeves - Adaptor - H2300

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 2304K to 2322K tapered bore self aligning ball bearing. Suits 23218K to 23256K tapered bore self aligning spherical roller bearings. Suits 22308K to 22356K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Adaptor - H2300.

Related Information:


Sleeves - Adaptor - H300
Sleeves - Adaptor - H300

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 1304K to 1322K tapered bore Self aligning ball bearing. Suits 2204K to 2222K tapered bore self aligning ball bearing. Suits 22205K to 22222K tapered bore self aligning spherical roller bearings. Suits 21304K to 21322K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Adaptor - H300.

Related Information:


Sleeves - Adaptor - H3000
Sleeves - Adaptor - H3000

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Adaptor - H3000.

Related Information:


Sleeves - Adaptor - H3100
Sleeves - Adaptor - H3100

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22224K to 22264K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Adaptor - H3100.

Related Information:


Sleeves - Hex Hole - Carbon Steel
Sleeves - Hex Hole - Carbon Steel

Also see combined categories:
All Hex Hole Sleeves

Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

This category may be available in the new MBA online store at Sleeves - Hex Hole - Carbon Steel.

There is also a good range of Sleeves - Hex Hole - Carbon Steel on the Small Parts and Bearings website.


Sleeves - Hex Hole - Hardened
Sleeves - Hex Hole - Hardened

Also see combined categories:
All Hex Hole Sleeves

Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

This category may be available in the new MBA online store at Sleeves - Hex Hole - Hardened.

There is also a good range of Sleeves - Hex Hole - Hardened on the Small Parts and Bearings website.


Sleeves - Square Hole - Plain - Carbon Steel
Sleeves - Square Hole - Plain - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.

This category may be available in the new MBA online store at Sleeves - Square Hole - Plain - Carbon Steel.

There is also a good range of Sleeves - Square Hole - Plain - Carbon Steel on the Small Parts and Bearings website.


Sleeves - Square Hole - Plain - Hardened
Sleeves - Square Hole - Plain - Hardened

Also see combined categories:
All Square Hole Sleeves

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.

This category may be available in the new MBA online store at Sleeves - Square Hole - Plain - Hardened.

There is also a good range of Sleeves - Square Hole - Plain - Hardened on the Small Parts and Bearings website.


Sleeves - Square Hole - Threaded - Carbon Steel
Sleeves - Square Hole - Threaded - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.

This category may be available in the new MBA online store at Sleeves - Square Hole - Threaded - Carbon Steel.

There is also a good range of Sleeves - Square Hole - Threaded - Carbon Steel on the Small Parts and Bearings website.


Sleeves - Withdrawal - AH3000
Sleeves - Withdrawal - AH3000

Also see combined categories:
All Withdrawal Sleeves

For use with tapered bore bearings

Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Withdrawal - AH3000.


Sleeves - Withdrawal - AH3100
Sleeves - Withdrawal - AH3100

Also see combined categories:
All Withdrawal Sleeves

For use with tapered bore bearings

Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22222K to 22234K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Withdrawal - AH3100.


Sleeves - Withdrawal - AH3200
Sleeves - Withdrawal - AH3200

Also see combined categories:
All Withdrawal Sleeves

For use with tapered bore bearings

Suits 23218K to 23240K tapered bore self aligning spherical roller bearings. Suits 23260K to 232-500K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Withdrawal - AH3200.


Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. This category may be available in the new MBA online store at Shaftloc-tm Sleeves - Single Ended.

Related Information:

There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.


Attachments - Cable - Loop Sleeves
Attachments - Cable - Loop Sleeves


Use with synchromesh or standard miniature cable

This category may be available in the new MBA online store at Attachments - Cable - Loop Sleeves.

Related Information:

There is also a good range of Attachments - Cable - Loop Sleeves on the Small Parts and Bearings website.


Attachments - Cable - Stop Sleeves
Attachments - Cable - Stop Sleeves


Use with synchromesh or standard miniature cable. Use a swaging tool to compress the stop sleeve over the end of the cable.

This category may be available in the new MBA online store at Attachments - Cable - Stop Sleeves.

Related Information:

There is also a good range of Attachments - Cable - Stop Sleeves on the Small Parts and Bearings website.


Couplings - Geargrip - Precision - Sleeves Only
Couplings - Geargrip - Precision - Sleeves Only


Match with hubs from hubs category

This category may be available in the new MBA online store at Couplings - Geargrip - Precision - Sleeves Only.

Related Information:

There is also a good range of Couplings - Geargrip - Precision - Sleeves Only on the Small Parts and Bearings website.


Couplings - Crowned Tooth Gear - Sleeve Only
Couplings - Crowned Tooth Gear - Sleeve Only


Match with hubs from the hubs category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:

There is also a good range of Couplings - Crowned Tooth Gear - Sleeve Only on the Small Parts and Bearings website.


Bearings - Needle Roller - Inner Rings
Bearings - Needle Roller - Inner Rings


Hardened sleeves for needle roller bearings.

This category may be available in the new MBA online store at Bearings - Needle Roller - Inner Rings.

Related Information:

There is also a good range of Bearings - Needle Roller - Inner Rings on the Small Parts and Bearings website.


Couplings - Geargrip - Precision - Hubs Only
Couplings - Geargrip - Precision - Hubs Only


Match with sleeves from sleeves category

This category may be available in the new MBA online store at Couplings - Geargrip - Precision - Hubs Only.

Related Information:

There is also a good range of Couplings - Geargrip - Precision - Hubs Only on the Small Parts and Bearings website.


Couplings - Crowned Tooth Gear - Hubs Only
Couplings - Crowned Tooth Gear - Hubs Only


Match with sleeves from the sleeves category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:

There is also a good range of Couplings - Crowned Tooth Gear - Hubs Only on the Small Parts and Bearings website.


Bearings - Roller - Spherical - Tapered Bore - 22224K to 22264K
Bearings - Roller - Spherical - Tapered Bore - 22224K to 22264K

Also see combined categories:
All Spherical Roller Bearings

Use with H3100 Series Adaptor Sleeves. AH3100 Withdrawal sleeves up to 22234K and AH2200 withdrawal sleeves from 22236K to 22264K

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:


Ballscrew - Nook Series - Flanges
Ballscrew - Nook Series - Flanges


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish. This category may be available in the new MBA online store at Ballscrew - Nook Series - Flanges.

There is also a good range of Ballscrew - Nook Series - Flanges on the Small Parts and Bearings website.


Bearings - Roller - Spherical - Tapered Bore - 21305K to 21322K Series
Bearings - Roller - Spherical - Tapered Bore - 21305K to 21322K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:


Bearings - Roller - Spherical - Tapered Bore - 22205K to 22222K Series
Bearings - Roller - Spherical - Tapered Bore - 22205K to 22222K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.


Related Information:


Bearings - Roller - Spherical - Tapered Bore - 22308K to 22356K Series
Bearings - Roller - Spherical - Tapered Bore - 22308K to 22356K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H2300 Series Adaptor Sleeves or AH2300 Withdrawal Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:


Bearings - Roller - Spherical - Tapered Bore - 23218K to 23256K Series
Bearings - Roller - Spherical - Tapered Bore - 23218K to 23256K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H2300 Series Adaptor Sleeves. AH3200 Withdrawal sleeves up to 23240K and AH2300 withdrawal sleeves from 23244K to 23256K

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:


Bearings - Roller - Spherical - Tapered Bore - 23024K to 230-500K Series
Bearings - Roller - Spherical - Tapered Bore - 23024K to 230-500K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H3000 Series Adaptor Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:


Bearings - Roller - Spherical - Tapered Bore - 23100K to 231-500K Series
Bearings - Roller - Spherical - Tapered Bore - 23100K to 231-500K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H3100 Series Adaptor Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:


Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Heavy Series
Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Heavy Series

Also see combined categories:
All Double Row Ball Bearings
All Self Aligning Ball Bearings

Use with H300 heavy series adaptor sleeves or AH300 Withdrawal sleeves


Related Information:


Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Light Series
Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Light Series

Also see combined categories:
All Double Row Ball Bearings
All Self Aligning Ball Bearings

Use with H200 light series adaptor sleeves or AH200 Withdrawal sleeves


Related Information:


Ballscrew - Nook Series - Right Hand
Ballscrew - Nook Series - Right Hand


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

High quality alloy steel, induction hardened to RC 56-60. Protective black oxide finish. Lead accurate by at least 0.00083mm per mm. This category may be available in the new MBA online store at Ballscrew - Nook Series - Right Hand.

There is also a good range of Ballscrew - Nook Series - Right Hand on the Small Parts and Bearings website.


Rollers - Urethane - Lengths
Rollers - Urethane - Lengths

Also see combined categories:
All Tyred OD Bearings
All Rollers

Low cost alternative for making your own wheels, castors, rollers, sheaves etc. Urethane rod with dual hardness. Harder inner sleeve with softer outside for use as a roller.

Blue outer tyre 90A Durometer bonded to a hard brown 75D Durometer inner sleeve. This results in a hard anti friction bearing surface inside with a soft tyre outside. The roller can be cut and machined to suit your purposes. Testing for your application is recommended. This category may be available in the new MBA online store at Rollers - Urethane - Lengths.

Related Information:

There is also a good range of Rollers - Urethane - Lengths on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - 303 Stainless Steel
Plungers - Ball - Push Fit - 303 Stainless Steel

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.

There is also a good range of Plungers - Ball - Push Fit - 303 Stainless Steel on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Plastic Body - Plastic Ball
Plungers - Ball - Push Fit - Plastic Body - Plastic Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded. Plastic body and ball.

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.

There is also a good range of Plungers - Ball - Push Fit - Plastic Body - Plastic Ball on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless on the Small Parts and Bearings website.


Collars - Shaft - Gripfast - ABS Plastic
Collars - Shaft - Gripfast - ABS Plastic

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs. This category may be available in the new MBA online store at Collars - Shaft - Gripfast - ABS Plastic.

Related Information:

There is also a good range of Collars - Shaft - Gripfast - ABS Plastic on the Small Parts and Bearings website.


Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

There is also a good range of Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing on the Small Parts and Bearings website.


Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

There is also a good range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing on the Small Parts and Bearings website.


Inserts - Rivet Nuts - Klik - Threadsert
Inserts - Rivet Nuts - Klik - Threadsert

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.

There is also a good range of Inserts - Rivet Nuts - Klik - Threadsert on the Small Parts and Bearings website.


Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing
Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing


Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food grade.

There is also a good range of Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing on the Small Parts and Bearings website.


Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing
Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing


Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food Grade.

There is also a good range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.