Miniature Bearings Australia Pty Ltd

Plungers Ball Categories


Plungers - Ball - Push Fit - 303 Stainless Steel
Plungers - Ball - Push Fit - 303 Stainless Steel

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.

There is also a good range of Plungers - Ball - Push Fit - 303 Stainless Steel on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Brass Body - Stainless Ball - Double Ended
Plungers - Ball - Push Fit - Brass Body - Stainless Ball - Double Ended

Also see combined categories:
All Push Fit Ball Plungers

Used for indexing and positioning of components

Once installed, it applies adequate pressure so the ball remains positioned.

There is also a good range of Plungers - Ball - Push Fit - Brass Body - Stainless Ball - Double Ended on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Plastic Body - Plastic Ball
Plungers - Ball - Push Fit - Plastic Body - Plastic Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded. Plastic body and ball.

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.

There is also a good range of Plungers - Ball - Push Fit - Plastic Body - Plastic Ball on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Plastic Body - Stainless Ball
Plungers - Ball - Push Fit - Plastic Body - Stainless Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded.


There is also a good range of Plungers - Ball - Push Fit - Plastic Body - Stainless Ball on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Stainless Body - Acetal Ball
Plungers - Ball - Push Fit - Stainless Body - Acetal Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded.


There is also a good range of Plungers - Ball - Push Fit - Stainless Body - Acetal Ball on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Stainless Body - Nylon Ball
Plungers - Ball - Push Fit - Stainless Body - Nylon Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded.


There is also a good range of Plungers - Ball - Push Fit - Stainless Body - Nylon Ball on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Stainless Body - Plastic Ball
Plungers - Ball - Push Fit - Stainless Body - Plastic Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded.


There is also a good range of Plungers - Ball - Push Fit - Stainless Body - Plastic Ball on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Steel Body - Acetal Ball
Plungers - Ball - Push Fit - Steel Body - Acetal Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded.


There is also a good range of Plungers - Ball - Push Fit - Steel Body - Acetal Ball on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Steel Body - Nylon Ball
Plungers - Ball - Push Fit - Steel Body - Nylon Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded.


There is also a good range of Plungers - Ball - Push Fit - Steel Body - Nylon Ball on the Small Parts and Bearings website.


Plungers - Ball - Push Fit - Steel Body - Stainless Ball
Plungers - Ball - Push Fit - Steel Body - Stainless Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded.


There is also a good range of Plungers - Ball - Push Fit - Steel Body - Stainless Ball on the Small Parts and Bearings website.


Plungers - Ball - Threaded - 303 Stainless Steel
Plungers - Ball - Threaded - 303 Stainless Steel

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel on the Small Parts and Bearings website.


Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls
Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls on the Small Parts and Bearings website.


Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock
Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock

Also see combined categories:
All Threaded Ball Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock on the Small Parts and Bearings website.


Plungers - Ball - Threaded - Acetal Body and Nylon Ball
Plungers - Ball - Threaded - Acetal Body and Nylon Ball

Also see combined categories:
All Threaded Ball Plungers

For use in plastic applications or when the application requires as few metal parts as possible.

Electrical isolation. Highly durable acetal body with stainless steel spring allows use in corrosive environments. Plunger wrenches will not work with these.

There is also a good range of Plungers - Ball - Threaded - Acetal Body and Nylon Ball on the Small Parts and Bearings website.


Plungers - Ball - Threaded - Acetal Body with Stainless Ball
Plungers - Ball - Threaded - Acetal Body with Stainless Ball

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - Acetal Body with Stainless Ball on the Small Parts and Bearings website.


Plungers - Ball - Threaded - Steel
Plungers - Ball - Threaded - Steel

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - Steel on the Small Parts and Bearings website.


Plungers - Ball - Threaded - Steel Body - Nylon Ball
Plungers - Ball - Threaded - Steel Body - Nylon Ball

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - Steel Body - Nylon Ball on the Small Parts and Bearings website.


Plungers - Ball - Threaded - Steel Body - Stainless Ball
Plungers - Ball - Threaded - Steel Body - Stainless Ball

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - Steel Body - Stainless Ball on the Small Parts and Bearings website.


Plungers - Ball - Threaded - Steel - Threadlock
Plungers - Ball - Threaded - Steel - Threadlock

Also see combined categories:
All Threaded Ball Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Ball - Threaded - Steel - Threadlock on the Small Parts and Bearings website.


Plungers - Ball - Threaded - With Limit Switch
Plungers - Ball - Threaded - With Limit Switch

Also see combined categories:
All Threaded Ball Plungers

Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.

Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.

There is also a good range of Plungers - Ball - Threaded - With Limit Switch on the Small Parts and Bearings website.


Ball Buttons
Ball Buttons


Also known as striker bushings or ball plunger detents. Use with ball or bolt spring plungers for a hard wearing contact area.

Burnished ground hardened steel.

There is also a good range of Ball Buttons on the Small Parts and Bearings website.


Sleeves - Cylindrical - Precision Indexing Plunger
Sleeves - Cylindrical - Precision Indexing Plunger

Also see combined categories:
All Sleeves for Plungers

Use with precision indexing plungers and locking bolts


There is also a good range of Sleeves - Cylindrical - Precision Indexing Plunger on the Small Parts and Bearings website.


Sleeves - Tapered - Precision Indexing Plunger
Sleeves - Tapered - Precision Indexing Plunger

Also see combined categories:
All Sleeves for Plungers

Use with precision indexing plungers and locking bolts


There is also a good range of Sleeves - Tapered - Precision Indexing Plunger on the Small Parts and Bearings website.


You may also be interested in

Plungers Indexing


Plungers - Indexing - Precision - Ball Grip
Plungers - Indexing - Precision - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Precision - Ball Grip on the Small Parts and Bearings website.


Plungers - Indexing - Precision - Locking - Ball Grip
Plungers - Indexing - Precision - Locking - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Precision - Locking - Ball Grip on the Small Parts and Bearings website.


Plungers - Indexing - Precision - With Support - Ball Grip
Plungers - Indexing - Precision - With Support - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Precision - With Support - Ball Grip on the Small Parts and Bearings website.


Plungers - Indexing - Precision - With Support - Locking - Ball Grip
Plungers - Indexing - Precision - With Support - Locking - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Precision - With Support - Locking - Ball Grip on the Small Parts and Bearings website.


Wrenches


Wrench - Plunger
Wrench - Plunger


Provides fast installation and removal of ball, spring and stubby spring plungers with slots at the spring loaded end. Prevents damage that can occur when a standard screwdriver is used by providing a recess for the tip whilst the body is being rotated.


There is also a good range of Wrench - Plunger on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122201 products in 2649 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122201 products in 2649 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.