Plungers Ball Categories
Plungers - Ball - Push Fit - 303 Stainless Steel
Unthreaded
Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.
There is also a good range of Plungers - Ball - Push Fit - 303 Stainless Steel on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Brass Body - Stainless Ball - Double Ended
Used for indexing and positioning of components
Once installed, it applies adequate pressure so the ball remains positioned.
There is also a good range of Plungers - Ball - Push Fit - Brass Body - Stainless Ball - Double Ended on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Plastic Body - Plastic Ball
Unthreaded. Plastic body and ball.
Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.
There is also a good range of Plungers - Ball - Push Fit - Plastic Body - Plastic Ball on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Plastic Body - Stainless Ball
Unthreaded.
There is also a good range of Plungers - Ball - Push Fit - Plastic Body - Stainless Ball on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Stainless Body - Acetal Ball
Unthreaded.
There is also a good range of Plungers - Ball - Push Fit - Stainless Body - Acetal Ball on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Stainless Body - Nylon Ball
Unthreaded.
There is also a good range of Plungers - Ball - Push Fit - Stainless Body - Nylon Ball on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Stainless Body - Plastic Ball
Unthreaded.
There is also a good range of Plungers - Ball - Push Fit - Stainless Body - Plastic Ball on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Steel Body - Acetal Ball
Unthreaded.
There is also a good range of Plungers - Ball - Push Fit - Steel Body - Acetal Ball on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Steel Body - Nylon Ball
Unthreaded.
There is also a good range of Plungers - Ball - Push Fit - Steel Body - Nylon Ball on the Small Parts and Bearings website.
Plungers - Ball - Push Fit - Steel Body - Stainless Ball
Unthreaded.
There is also a good range of Plungers - Ball - Push Fit - Steel Body - Stainless Ball on the Small Parts and Bearings website.
Plungers - Ball - Threaded - 303 Stainless Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel on the Small Parts and Bearings website.
Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls on the Small Parts and Bearings website.
Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock
With Long-Lok thread locking compound to prevent loosening
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock on the Small Parts and Bearings website.
Plungers - Ball - Threaded - Acetal Body and Nylon Ball
For use in plastic applications or when the application requires as few metal parts as possible.
Electrical isolation. Highly durable acetal body with stainless steel spring allows use in corrosive environments. Plunger wrenches will not work with these.
There is also a good range of Plungers - Ball - Threaded - Acetal Body and Nylon Ball on the Small Parts and Bearings website.
Plungers - Ball - Threaded - Acetal Body with Stainless Ball
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - Acetal Body with Stainless Ball on the Small Parts and Bearings website.
Plungers - Ball - Threaded - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - Steel on the Small Parts and Bearings website.
Plungers - Ball - Threaded - Steel Body - Nylon Ball
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - Steel Body - Nylon Ball on the Small Parts and Bearings website.
Plungers - Ball - Threaded - Steel Body - Stainless Ball
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - Steel Body - Stainless Ball on the Small Parts and Bearings website.
Plungers - Ball - Threaded - Steel - Threadlock
With Long-Lok thread locking compound to prevent loosening
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Ball - Threaded - Steel - Threadlock on the Small Parts and Bearings website.
Plungers - Ball - Threaded - With Limit Switch
Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.
Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.
There is also a good range of Plungers - Ball - Threaded - With Limit Switch on the Small Parts and Bearings website.
Ball Buttons
Also known as striker bushings or ball plunger detents. Use with ball or bolt spring plungers for a hard wearing contact area.
Burnished ground hardened steel.
There is also a good range of Ball Buttons on the Small Parts and Bearings website.
You may also be interested in
Plungers Indexing
Plungers - Indexing - Precision - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Precision - Ball Grip on the Small Parts and Bearings website.
Plungers - Indexing - Precision - Locking - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Precision - Locking - Ball Grip on the Small Parts and Bearings website.
Plungers - Indexing - Precision - With Support - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Precision - With Support - Ball Grip on the Small Parts and Bearings website.
Plungers - Indexing - Precision - With Support - Locking - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Precision - With Support - Locking - Ball Grip on the Small Parts and Bearings website.
Wrenches
Wrench - Plunger
Provides fast installation and removal of ball, spring and stubby spring plungers with slots at the spring loaded end. Prevents damage that can occur when a standard screwdriver is used by providing a recess for the tip whilst the body is being rotated.
There is also a good range of Wrench - Plunger on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action Mounting Blocks
Used with cam action indexing plungers
Mounting blocks are made from steel with black oxide finish.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action Mounting Blocks on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - With Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - Without Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.
Plungers - Indexing - Grip - Stainless - With Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Stainless - With Nut on the Small Parts and Bearings website.
Plungers - Indexing - Grip - Stainless - Without Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Stainless - Without Nut on the Small Parts and Bearings website.
Plungers - Indexing - Grip - Steel - With Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Steel - With Nut on the Small Parts and Bearings website.
Plungers - Indexing - Grip - Steel - Without Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Steel - Without Nut on the Small Parts and Bearings website.
Plungers - Indexing - Large Handle
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Large Handle on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
There is also a good range of Plungers - Indexing - Locking - With Knob - 303 stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Locking - With Knob - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Mounting Plate - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.
There is also a good range of Plungers - Indexing - Locking - With Mounting Plate - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Shoulder - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Locking - With Shoulder - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Non Locking - Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
There is also a good range of Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Non Locking - With Knob - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel.
There is also a good range of Plungers - Indexing - Non Locking - With Mounting Plate - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
There is also a good range of Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Without Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Non Locking - Without Knob - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob on the Small Parts and Bearings website.
Plungers - Indexing - Pull Knob - 303 Stainless
With thermoplastic knob
There is also a good range of Plungers - Indexing - Pull Knob - 303 Stainless on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
