Pins General Categories
Pins - Hitch - External
Similar to R-Clips, but designed for both arms to fit around a shaft groove rather thand having one arm through a bored hole.
Related Information:
There is also a good range of Pins - Hitch - External on the Small Parts and Bearings website.
Pins - Hydraulic Cylinder
Related Information:
There is also a good range of Pins - Hydraulic Cylinder on the Small Parts and Bearings website.
Pins - Clik - Carbon Steel
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.
Related Information:
There is also a good range of Pins - Clik - Carbon Steel on the Small Parts and Bearings website.
Pins - Clik - Mild Steel
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.
Related Information:
There is also a good range of Pins - Clik - Mild Steel on the Small Parts and Bearings website.
Pins - Clik - Stainless Steel 316 Grade
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.
Related Information:
There is also a good range of Pins - Clik - Stainless Steel 316 Grade on the Small Parts and Bearings website.
Pins - Side Thrust - Double Sided - Steel Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Steel ball and elasticised spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Double Sided - Steel Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Plastic Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Plastic ball and stainless spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Plastic Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Stainless Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Stainless ball and stainless spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Stainless Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Steel Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Steel ball and elasticised spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Steel Ball on the Small Parts and Bearings website.
You may also be interested in
Tools General
Tools - Pin Vises
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.
Tools - Chain Breaker
Used to break roller chain at the pins
There is also a good range of Tools - Chain Breaker on the Small Parts and Bearings website.
Tools - Reamers - Tapered - Hand
Tapered reamers for taper pin holes
There is also a good range of Tools - Reamers - Tapered - Hand on the Small Parts and Bearings website.
Shafting General Purpose
Rod - Drill Blanks
Made of hardened high speed steel.
Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.
There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.
Tools General
Tools - General
Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits
X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.
There is also a good range of Tools - General on the Small Parts and Bearings website.
Tools Bending
Tools - Wire Working
For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.
Related Information:
There is also a good range of Tools - Wire Working on the Small Parts and Bearings website.
Pushbike Bearings
General Derailer Sprocket Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of General Derailer Sprocket Parts on the Small Parts and Bearings website.
Lubricants General Purpose
Lubricants - General
Various brands and types. Includes Inox, Lanox, Anti-Seize, Cutting Fluid, Chain Lube, Moly Lube, Food Grade Grease, PTFE Lubes, Silicone and more
Some items in this category are marked as only available for collection. Includes high temperature and food grade lubes. Battery Conditioner - Oils - Moisture Inhibitor - WD - Valve and Oring Lubricant.
There is also a good range of Lubricants - General on the Small Parts and Bearings website.
Castors - Plate - General Purpose - Fixed
There is also a good range of Castors - Plate - General Purpose - Fixed on the Small Parts and Bearings website.
Castors - Plate - General Purpose - Swivel
There is also a good range of Castors - Plate - General Purpose - Swivel on the Small Parts and Bearings website.
Castors - Plate - General Purpose - Swivel with Brake
There is also a good range of Castors - Plate - General Purpose - Swivel with Brake on the Small Parts and Bearings website.
Wheels - Hobby - General
Includes wheels for robots and general hobby applications
Also see tracks for Robotic applications.
Related Information:
There is also a good range of Wheels - Hobby - General on the Small Parts and Bearings website.
Rod - Drill - General
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.
Related Information:
There is also a good range of Rod - Drill - General on the Small Parts and Bearings website.
Castors - Stud - Threaded - General Purpose - Swivel
There is also a good range of Castors - Stud - Threaded - General Purpose - Swivel on the Small Parts and Bearings website.
Posts - Spring
Related Information:
There is also a good range of Posts - Spring on the Small Parts and Bearings website.
Tools - Sets
General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.
There is also a good range of Tools - Sets on the Small Parts and Bearings website.
Tools - Drills
Hobby drill for very small bits.
There is also a good range of Tools - Drills on the Small Parts and Bearings website.
Tools - Tweezers
Selection of tweezers for those fiddly jobs.
There is also a good range of Tools - Tweezers on the Small Parts and Bearings website.
Castors - Stud - Friction Ring - General Purpose - Swivel
There is also a good range of Castors - Stud - Friction Ring - General Purpose - Swivel on the Small Parts and Bearings website.
Hobby - Washer Packs
Hobby Washer Packs. Includes Dubro Range
There is also a good range of Hobby - Washer Packs on the Small Parts and Bearings website.
Channel - Brass
For general hobby applications.
There is also a good range of Channel - Brass on the Small Parts and Bearings website.
Heat Shrink Tubing
Includes Dubro Range.
There is also a good range of Heat Shrink Tubing on the Small Parts and Bearings website.
Tools - Nut Drivers
Includes socket wrench for 0-80 size screws
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.
Mounts - Vibration - Isolation Pads - General Purpose
For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.
Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.
Related Information:
There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.
Magnets - Alnico - Horseshoe
General purpose horseshoe magnet
There is also a good range of Magnets - Alnico - Horseshoe on the Small Parts and Bearings website.
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Shafting - Unground - Silver Steel
Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.
See also drill rod. Drill Rod.
Related Information:
There is also a good range of Shafting - Unground - Silver Steel on the Small Parts and Bearings website.
Strip - Soft Metal Packs
For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
There is also a good range of Strip - Soft Metal Packs on the Small Parts and Bearings website.
O-Rings - Nitrile Rubber
General purpose. Includes o-rings for dental handpiece applications.
Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.
Related Information:
There is also a good range of O-Rings - Nitrile Rubber on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Cased
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Cased on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Open
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Open on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur G - Flanged
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur G - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur G - Unflanged
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur G - Unflanged on the Small Parts and Bearings website.
Rod - Drill - A-2 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - A-2 Air Hardening on the Small Parts and Bearings website.
Rod - Drill - O-1 Oil Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - O-1 Oil Hardening on the Small Parts and Bearings website.
Rod - Drill - S-7 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - S-7 Air Hardening on the Small Parts and Bearings website.
Rod - Drill - W-1 Water Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - W-1 Water Hardening on the Small Parts and Bearings website.
Rod - Round - Aluminium
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
Related Information:
There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.
Rod - Round - Brass
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
Related Information:
There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.
Oil Seals - Nitrile Rubber
DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.
Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.
There is also a good range of Oil Seals - Nitrile Rubber on the Small Parts and Bearings website.
Rod - Round - Stainless Steel
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
Related Information:
There is also a good range of Rod - Round - Stainless Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125388 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
