Miniature Bearings Australia Pty Ltd

Pinion Wire Metric Categories


Gears - Pinion Wire - Module 0.4
Gears - Pinion Wire - Module 0.4

Also see combined categories:
All Metric Pinion Wire

Brass

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.

There is also a good range of Gears - Pinion Wire - Module 0.4 on the Small Parts and Bearings website.


Gears - Pinion Wire - Module 0.5
Gears - Pinion Wire - Module 0.5

Also see combined categories:
All Metric Pinion Wire

Brass

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.

There is also a good range of Gears - Pinion Wire - Module 0.5 on the Small Parts and Bearings website.


Gears - Pinion Wire - Module 0.8
Gears - Pinion Wire - Module 0.8

Also see combined categories:
All Metric Pinion Wire

Brass

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.

There is also a good range of Gears - Pinion Wire - Module 0.8 on the Small Parts and Bearings website.


You may also be interested in

Pinion Wire Imperial


Gears - Pinion Wire - 24 Diametrical Pitch
Gears - Pinion Wire - 24 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.

There is also a good range of Gears - Pinion Wire - 24 Diametrical Pitch on the Small Parts and Bearings website.


Gears - Pinion Wire - 32 Diametrical Pitch
Gears - Pinion Wire - 32 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.

There is also a good range of Gears - Pinion Wire - 32 Diametrical Pitch on the Small Parts and Bearings website.


Gears - Pinion Wire - 48 Diametrical Pitch
Gears - Pinion Wire - 48 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.

There is also a good range of Gears - Pinion Wire - 48 Diametrical Pitch on the Small Parts and Bearings website.


Gears - Pinion Wire - 64 Diametrical Pitch
Gears - Pinion Wire - 64 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.

There is also a good range of Gears - Pinion Wire - 64 Diametrical Pitch on the Small Parts and Bearings website.


Wire - Steel - Spring - Music Wire - Short Lengths
Wire - Steel - Spring - Music Wire - Short Lengths

Also see combined categories:
All Spring Wire

SAE 1090 Spring Steel. Includes inch and metric sizes.

Shipped in straight lengths on wooden backing board. Metric and imperial.

Related Information:

There is also a good range of Wire - Steel - Spring - Music Wire - Short Lengths on the Small Parts and Bearings website.


Leadscrews - Metric - Rolled Thread - Carbon Steel
Leadscrews - Metric - Rolled Thread - Carbon Steel

Also see combined categories:
All Metric Leadscrews

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Carbon Steel C35. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Related Information:

There is also a good range of Leadscrews - Metric - Rolled Thread - Carbon Steel on the Small Parts and Bearings website.


Shafts - Pinion
Shafts - Pinion



There is also a good range of Shafts - Pinion on the Small Parts and Bearings website.


Pins - Taper - Metric - Carbon Steel
Pins - Taper - Metric - Carbon Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50

Metric Sizes to DIN 1.

Related Information:

There is also a good range of Pins - Taper - Metric - Carbon Steel on the Small Parts and Bearings website.


Pins - Taper - Metric - Extractable - Internal Thread
Pins - Taper - Metric - Extractable - Internal Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded internally for easy extraction.

DIN 7978. Mild Steel.

Related Information:

There is also a good range of Pins - Taper - Metric - Extractable - Internal Thread on the Small Parts and Bearings website.


Pins - Taper - Metric - Stainless Steel
Pins - Taper - Metric - Stainless Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50

Metric Sizes to DIN 1.

Related Information:

There is also a good range of Pins - Taper - Metric - Stainless Steel on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Flanged - Plastic
Leadscrew Nuts - Metric - Flanged - Plastic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300. Single Start / Right Hand.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Flanged - Plastic on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Round - Metallic on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300
Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300 Plastic. Single Start / Right Hand.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300 on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.


Springs - Die - Metric - Extra Heavy Duty
Springs - Die - Metric - Extra Heavy Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded yellow

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:

There is also a good range of Springs - Die - Metric - Extra Heavy Duty on the Small Parts and Bearings website.


Springs - Die - Metric - Heavy Duty
Springs - Die - Metric - Heavy Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:

There is also a good range of Springs - Die - Metric - Heavy Duty on the Small Parts and Bearings website.


Springs - Die - Metric - Light Duty
Springs - Die - Metric - Light Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:

There is also a good range of Springs - Die - Metric - Light Duty on the Small Parts and Bearings website.


Springs - Die - Metric - Medium Duty
Springs - Die - Metric - Medium Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:

There is also a good range of Springs - Die - Metric - Medium Duty on the Small Parts and Bearings website.


Studs - Threaded - Standard
Studs - Threaded - Standard


Metric and imperial sizes. Steel and 303 stainless steel.

Yield strength 100,000 PSI. Tensile strength 125,000 PSI.

There is also a good range of Studs - Threaded - Standard on the Small Parts and Bearings website.


Screws - Security - Button - Socket
Screws - Security - Button - Socket

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

There is also a good range of Screws - Security - Button - Socket on the Small Parts and Bearings website.


Screws - Security - Cap - Socket
Screws - Security - Cap - Socket

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

There is also a good range of Screws - Security - Cap - Socket on the Small Parts and Bearings website.


Gears - Bevel - Module 0.5 - Brass
Gears - Bevel - Module 0.5 - Brass

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.5 - Brass on the Small Parts and Bearings website.


Gears - Bevel - Module 0.5 - Plastic
Gears - Bevel - Module 0.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.5 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 0.8 - Brass
Gears - Bevel - Module 0.8 - Brass

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.8 - Brass on the Small Parts and Bearings website.


Gears - Bevel - Module 0.8 - Plastic
Gears - Bevel - Module 0.8 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.8 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 1.5 - Plastic
Gears - Bevel - Module 1.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1.5 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 1.5 - Steel
Gears - Bevel - Module 1.5 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1.5 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 1 - Steel
Gears - Bevel - Module 1 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 2.5 - Plastic
Gears - Bevel - Module 2.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2.5 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 2.5 - Steel
Gears - Bevel - Module 2.5 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2.5 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 2 - Plastic
Gears - Bevel - Module 2 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 2 - Steel
Gears - Bevel - Module 2 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 3 - Plastic
Gears - Bevel - Module 3 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 3 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 3 - Steel
Gears - Bevel - Module 3 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 3 - Steel on the Small Parts and Bearings website.


Gears - Helical - Module 1.5 - Steel
Gears - Helical - Module 1.5 - Steel

Also see combined categories:
All Metric Helical Gears


There is also a good range of Gears - Helical - Module 1.5 - Steel on the Small Parts and Bearings website.


Gears - Helical - Module 1 - Steel
Gears - Helical - Module 1 - Steel

Also see combined categories:
All Metric Helical Gears


There is also a good range of Gears - Helical - Module 1 - Steel on the Small Parts and Bearings website.


Gears - Helical - Module 2 - Steel
Gears - Helical - Module 2 - Steel

Also see combined categories:
All Metric Helical Gears


There is also a good range of Gears - Helical - Module 2 - Steel on the Small Parts and Bearings website.


Gears - Internal - Module 0.5 - Stainless
Gears - Internal - Module 0.5 - Stainless

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - Module 0.5 - Stainless on the Small Parts and Bearings website.


Gears - Internal - Module 0.8 - Stainless
Gears - Internal - Module 0.8 - Stainless

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - Module 0.8 - Stainless on the Small Parts and Bearings website.


Gears - Internal - Module 1 - Stainless
Gears - Internal - Module 1 - Stainless

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - Module 1 - Stainless on the Small Parts and Bearings website.


Gears - Mitre - Module 0.5 - Brass
Gears - Mitre - Module 0.5 - Brass

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.5 - Brass on the Small Parts and Bearings website.


Gears - Mitre - Module 0.5 - Plastic
Gears - Mitre - Module 0.5 - Plastic

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.5 - Plastic on the Small Parts and Bearings website.


Gears - Mitre - Module 0.6 - Aluminium
Gears - Mitre - Module 0.6 - Aluminium

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.6 - Aluminium on the Small Parts and Bearings website.


Gears - Mitre - Module 0.6 - Brass
Gears - Mitre - Module 0.6 - Brass

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.6 - Brass on the Small Parts and Bearings website.


Gears - Mitre - Module 0.6 - Stainless
Gears - Mitre - Module 0.6 - Stainless

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.6 - Stainless on the Small Parts and Bearings website.


Gears - Mitre - Module 0.6 - Steel
Gears - Mitre - Module 0.6 - Steel

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.6 - Steel on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122230 products in 2651 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122230 products in 2651 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.