Pinion Wire Imperial Categories
Gears - Pinion Wire - 32 Diametrical Pitch
Brass and carbon steel.
Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.
There is also a good range of Gears - Pinion Wire - 32 Diametrical Pitch on the Small Parts and Bearings website.
Wire - Steel - Spring - Music Wire - Short Lengths
SAE 1090 Spring Steel. Includes inch and metric sizes.
Shipped in straight lengths on wooden backing board. Metric and imperial.
Related Information:
There is also a good range of Wire - Steel - Spring - Music Wire - Short Lengths on the Small Parts and Bearings website.
Leadscrews - Imperial - Acme - Alloy Steel
Acme Leadscrew Thread - Use with Acme Supernuts
Alloy steel heat treated to RC 56-60.
Related Information:
There is also a good range of Leadscrews - Imperial - Acme - Alloy Steel on the Small Parts and Bearings website.
Leadscrews - Imperial - Acme - Stainless Steel 18.8
Acme Leadscrew Thread - Use with Acme Supernuts
Related Information:
There is also a good range of Leadscrews - Imperial - Acme - Stainless Steel 18.8 on the Small Parts and Bearings website.
Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
Threaded externally for easy extraction.
Related Information:
There is also a good range of Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel on the Small Parts and Bearings website.
Pins - Taper - Imperial - Miniature - Carbon Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.
Related Information:
There is also a good range of Pins - Taper - Imperial - Miniature - Carbon Steel on the Small Parts and Bearings website.
Pins - Taper - Imperial - Miniature - Stainless Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.
Related Information:
There is also a good range of Pins - Taper - Imperial - Miniature - Stainless Steel on the Small Parts and Bearings website.
Pins - Taper - Imperial - Standard - Carbon Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
Related Information:
There is also a good range of Pins - Taper - Imperial - Standard - Carbon Steel on the Small Parts and Bearings website.
Pins - Taper - Imperial - Standard - Stainless Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
Related Information:
There is also a good range of Pins - Taper - Imperial - Standard - Stainless Steel on the Small Parts and Bearings website.
Leadscrew Nuts - Imperial - Acme - Bronze
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Nut only. Match with appropriate leadscrew.
Related Information:
There is also a good range of Leadscrew Nuts - Imperial - Acme - Bronze on the Small Parts and Bearings website.
Leadscrew Nuts - Imperial - Acme - Plastic
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Related Information:
There is also a good range of Leadscrew Nuts - Imperial - Acme - Plastic on the Small Parts and Bearings website.
Leadscrew Nuts - Imperial - Supernuts - Acme
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Related Information:
There is also a good range of Leadscrew Nuts - Imperial - Supernuts - Acme on the Small Parts and Bearings website.
Shims - Slotted - Imperial Sizes
Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.
There is also a good range of Shims - Slotted - Imperial Sizes on the Small Parts and Bearings website.
Springs - Die - Imperial - Extra Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Extra Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium-Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium-Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.
Circlips - External - Standard - Berryllium Copper
Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).
Related Information:
There is also a good range of Circlips - External - Standard - Berryllium Copper on the Small Parts and Bearings website.
Circlips - External - Standard - Carbon Steel
Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).
Plain carbon steel.
Related Information:
There is also a good range of Circlips - External - Standard - Carbon Steel on the Small Parts and Bearings website.
Circlips - External - Standard - Stainless Steel
Imperial and metric DIN471 / D1400 / N1400 / D1460. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).
PH15-7 Mo Stainless Steel.
Related Information:
There is also a good range of Circlips - External - Standard - Stainless Steel on the Small Parts and Bearings website.
Circlips - External - Standard - Zinc Plated
Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).
Zinc plated carbon steel.
Related Information:
There is also a good range of Circlips - External - Standard - Zinc Plated on the Small Parts and Bearings website.
Circlips - Internal - Standard - Carbon Steel
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).
Plain carbon steel. Tolerances on request. Standard and heavy duty options.
Related Information:
There is also a good range of Circlips - Internal - Standard - Carbon Steel on the Small Parts and Bearings website.
Circlips - Internal - Standard - Stainless Steel
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).
PH15-7 Mo Stainless Steel. Tolerances on request. Standard and heavy duty options.
Related Information:
There is also a good range of Circlips - Internal - Standard - Stainless Steel on the Small Parts and Bearings website.
Circlips - Internal - Standard - Zinc Plated
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).
Zinc plated carbon steel. Tolerances on request. Standard and heavy duty options.
Related Information:
There is also a good range of Circlips - Internal - Standard - Zinc Plated on the Small Parts and Bearings website.
Studs - Threaded - Standard
Metric and imperial sizes. Steel and 303 stainless steel.
Yield strength 100,000 PSI. Tensile strength 125,000 PSI.
There is also a good range of Studs - Threaded - Standard on the Small Parts and Bearings website.
Mounts - Leveling - Stud Type - Gold Chromate - Imperial
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
There is also a good range of Mounts - Leveling - Stud Type - Gold Chromate - Imperial on the Small Parts and Bearings website.
Mounts - Leveling - Stud Type - Nickel Plated - Imperial
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
There is also a good range of Mounts - Leveling - Stud Type - Nickel Plated - Imperial on the Small Parts and Bearings website.
Mounts - Leveling - Stud Type - Stainless Steel - Imperial
Good quality with value pricing. 303 stainless steel. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
There is also a good range of Mounts - Leveling - Stud Type - Stainless Steel - Imperial on the Small Parts and Bearings website.
E-Clips - Basic - Berrylium Copper
Basic imperial and metric e-clips DIN6799 and N1500. Berrylium Copper.
Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip.
Related Information:
There is also a good range of E-Clips - Basic - Berrylium Copper on the Small Parts and Bearings website.
E-Clips - Basic - Carbon Steel
Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.
Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated.
Related Information:
There is also a good range of E-Clips - Basic - Carbon Steel on the Small Parts and Bearings website.
E-Clips - Basic - Stainless Steel
Basic imperial and metric e-clips DIN6799 and N1500. Stainless Steel PH15-7 Mo.
Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip.
Related Information:
There is also a good range of E-Clips - Basic - Stainless Steel on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Female
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Male
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Male on the Small Parts and Bearings website.
E-Clips - Klipring
Also known as Poodle Rings - Imperial - N1504 / NKP
There is also a good range of E-Clips - Klipring on the Small Parts and Bearings website.
Collars - Shaft - With Integral Shim
Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.
Related Information:
There is also a good range of Collars - Shaft - With Integral Shim on the Small Parts and Bearings website.
Screws - Button - Socket - 304 Stainless
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - 304 Stainless on the Small Parts and Bearings website.
Screws - Button - Socket - 316 Stainless
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - 316 Stainless on the Small Parts and Bearings website.
Screws - Button - Socket - Alloy Steel
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - Alloy Steel on the Small Parts and Bearings website.
Screws - Button - Socket - Zinc Plated
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - Zinc Plated on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Hand - Sets
Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set
High Speed Steel (HSS) Short Machine taps. Older stock is Triangle Brand (UK). Newer stock is Volkel Brand (German).
There is also a good range of Tools - Taps - High Speed Steel - Hand - Sets on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tight Fit - Female
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Female on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Male on the Small Parts and Bearings website.
Screws - Cap - Socket - Molybdenum Disulphide Coated
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Molybdenum Disulphide Coated on the Small Parts and Bearings website.
Screws - Countersunk - Socket - Aluminium
Flat Head Countersunk UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.
Related Information:
There is also a good range of Screws - Countersunk - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Cap - Socket - 316 Stainless
UNC - UNF - METRIC - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - 316 Stainless on the Small Parts and Bearings website.
Screws - Cap - Socket - Alloy Steel
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Alloy Steel on the Small Parts and Bearings website.
Screws - Cap - Socket - Zinc Plated
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Zinc Plated on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
