Miniature Bearings Australia Pty Ltd

Oils specialised categories


Oil Seals


Oil Seals - Automotive
Oil Seals - Automotive

Also see combined categories:
All Oil Seals

Automotive Oil Seals.

This category may be available in the new MBA online store at Oil Seals - Automotive.

There is also a good range of Oil Seals - Automotive on the Small Parts and Bearings website.


Oil Seals - Fluoroelastomer Rubber
Oil Seals - Fluoroelastomer Rubber

Also see combined categories:
All Oil Seals

DIN 3760 - High Temperature and chemical resistance.

Operating Temp. Range: -20oC to +240oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. This category may be available in the new MBA online store at Oil Seals - Fluoroelastomer Rubber.

There is also a good range of Oil Seals - Fluoroelastomer Rubber on the Small Parts and Bearings website.


Oil Seals - Nitrile Rubber
Oil Seals - Nitrile Rubber

Also see combined categories:
All Oil Seals

DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.

Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at Oil Seals - Nitrile Rubber.

There is also a good range of Oil Seals - Nitrile Rubber on the Small Parts and Bearings website.


Bushings Spherical


Bushings - Spherical - Steel - With Oil Hole
Bushings - Spherical - Steel - With Oil Hole

Also see combined categories:
All Spherical Bushings

Steel spherical plain bearings. Also known as ball bushings.

Compensates for axial loads and misalignment. This category may be available in the new MBA online store at Bushings - Spherical - Steel - With Oil Hole.

There is also a good range of Bushings - Spherical - Steel - With Oil Hole on the Small Parts and Bearings website.


Bushings - Spherical - Steel - With Oil Hole and Wiper Seal
Bushings - Spherical - Steel - With Oil Hole and Wiper Seal

Also see combined categories:
All Spherical Bushings

Steel spherical plain bearings. Also known as ball bushings.

Compensates for axial loads and misalignment. This category may be available in the new MBA online store at Bushings - Spherical - Steel - With Oil Hole and Wiper Seal.

There is also a good range of Bushings - Spherical - Steel - With Oil Hole and Wiper Seal on the Small Parts and Bearings website.


Shafting General Purpose


Rod - Drill - O-1 Oil Hardening
Rod - Drill - O-1 Oil Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for O-1 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - O-1 Oil Hardening.

There is also a good range of Rod - Drill - O-1 Oil Hardening on the Small Parts and Bearings website.


Bearings Plates


Sheet - Sintered Bronze
Sheet - Sintered Bronze

Also see combined categories:
All Sheet

Oil impregnated porous bronze sheet.

This category may be available in the new MBA online store at Sheet - Sintered Bronze.

There is also a good range of Sheet - Sintered Bronze on the Small Parts and Bearings website.


Bushes Bronze


Bushes - Bronze - Sintered - Flanged
Bushes - Bronze - Sintered - Flanged

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Oil impregnated flanged sintered bronze bushes.

Precision items show an allowable Load Speed Rating in Newtons times RPM. This category may be available in the new MBA online store at Bushes - Bronze - Sintered - Flanged.

Related Information:

There is also a good range of Bushes - Bronze - Sintered - Flanged on the Small Parts and Bearings website.


Bushes - Bronze - Sintered - Unflanged
Bushes - Bronze - Sintered - Unflanged

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Oil impregnated sintered bronze bushes.

Precision items show an allowable Load Speed Rating in Newtons times RPM. This category may be available in the new MBA online store at Bushes - Bronze - Sintered - Unflanged.

Related Information:

There is also a good range of Bushes - Bronze - Sintered - Unflanged on the Small Parts and Bearings website.


Tube and Tubing


Tube - Round - Sintered Bronze
Tube - Round - Sintered Bronze

Also see combined categories:
All Metal Tube - Round

Oil impregnated sintered bronze tubing - self lubricating. Product will machine to the sizes listed and is supplied will be larger on OD and smaller on bore.

Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on ID to allow for machining. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A. This category may be available in the new MBA online store at Tube - Round - Sintered Bronze.

Related Information:

There is also a good range of Tube - Round - Sintered Bronze on the Small Parts and Bearings website.


Bushes Bronze


Bushes - Bronze - Spherical - Sintered
Bushes - Bronze - Spherical - Sintered

Also see combined categories:
All Bronze Bushes

Spherical OD Oil Impregnated Sintered Bronze Bushes.

ID and OD oversized. Enquire if details required. This category may be available in the new MBA online store at Bushes - Bronze - Spherical - Sintered.

Related Information:

There is also a good range of Bushes - Bronze - Spherical - Sintered on the Small Parts and Bearings website.


Bushes Steel


Bushes - Stainless Steel and PTFE - Flanged
Bushes - Stainless Steel and PTFE - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Stainless Steel and PTFE - Flanged on the Small Parts and Bearings website.


Bushes - Stainless Steel and PTFE - Unflanged
Bushes - Stainless Steel and PTFE - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Stainless Steel and PTFE - Unflanged on the Small Parts and Bearings website.


Balls Rubber


Balls - Rubber - Nitrile
Balls - Rubber - Nitrile

Also see combined categories:
All Rubber Balls
All Non Metallic Balls

Buna-N. Resistant to petroleum-based oils. Used in pumps and check-valves.

This category may be available in the new MBA online store at Balls - Rubber - Nitrile.

Related Information:


Bushes Steel


Bushes - Steel - DP4 - Split - Flanged
Bushes - Steel - DP4 - Split - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free. Speed Limit in oil 3 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Steel - DP4 - Split - Flanged on the Small Parts and Bearings website.


Washers Flat Metallic


Washers - Flat - Sintered Bronze - Precision
Washers - Flat - Sintered Bronze - Precision

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat thrust washers made from oil impregnated sintered bronze

This category may be available in the new MBA online store at Washers - Flat - Sintered Bronze - Precision.

Related Information:

There is also a good range of Washers - Flat - Sintered Bronze - Precision on the Small Parts and Bearings website.


Washers Thrust


Washers - Thrust - DP4 Type
Washers - Thrust - DP4 Type

Also see combined categories:
All Thrust Washers

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free. This category may be available in the new MBA online store at Washers - Thrust - DP4 Type.

There is also a good range of Washers - Thrust - DP4 Type on the Small Parts and Bearings website.


You may also be interested in

Mounts Machinery


Mounts - Neoprene Pads - Ribbed Pattern
Mounts - Neoprene Pads - Ribbed Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.

Related Information:

There is also a good range of Mounts - Neoprene Pads - Ribbed Pattern on the Small Parts and Bearings website.


Mounts - Neoprene Pads - Waffle Pattern
Mounts - Neoprene Pads - Waffle Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Oil resistant neoprene rubber.

Related Information:

There is also a good range of Mounts - Neoprene Pads - Waffle Pattern on the Small Parts and Bearings website.


Leadscrews


Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.


O-Rings


O-Rings - Silicone Rubber
O-Rings - Silicone Rubber

Also see combined categories:
All O-Rings

High thermal resistance and cold flexibility. Some dental applications are included in the listings. Commonly used in food appliactions.

Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.

Related Information:

There is also a good range of O-Rings - Silicone Rubber on the Small Parts and Bearings website.


Gear Racks Flexible


Gear Racks - Flexible
Gear Racks - Flexible

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.

There is also a good range of Gear Racks - Flexible on the Small Parts and Bearings website.


Engineering and Hobby Rod


Rod - Round - Sintered Bronze
Rod - Round - Sintered Bronze

Also see combined categories:
All Metal Rod - Round

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Related Information:

There is also a good range of Rod - Round - Sintered Bronze on the Small Parts and Bearings website.


Bushes Steel


Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Steel - DU - Split - Flanged on the Small Parts and Bearings website.


Bushes - Steel - DU - Split - Unflanged
Bushes - Steel - DU - Split - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Steel - DU - Split - Unflanged on the Small Parts and Bearings website.


Bearings Thrust


Bearings - Thrust - Roller - Cage and Rollers Only
Bearings - Thrust - Roller - Cage and Rollers Only

Also see combined categories:
All Roller Thrust Cages and Washers

Washers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

There is also a good range of Bearings - Thrust - Roller - Cage and Rollers Only on the Small Parts and Bearings website.


Bearings - Thrust - Roller - Washers
Bearings - Thrust - Roller - Washers

Also see combined categories:
All Roller Thrust Cages and Washers

Caged Rollers sold separately. Match these washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

There is also a good range of Bearings - Thrust - Roller - Washers on the Small Parts and Bearings website.


Plungers Ball


Plungers - Ball - Threaded - With Limit Switch
Plungers - Ball - Threaded - With Limit Switch

Also see combined categories:
All Threaded Ball Plungers

Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.

Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.

There is also a good range of Plungers - Ball - Threaded - With Limit Switch on the Small Parts and Bearings website.


Mounts Machinery


Mounts - Compression
Mounts - Compression


Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.

Made with durable oil and ozone resistant neoprene. No special tools required for installation. This category may be available in the new MBA online store at Mounts - Compression.

Related Information:

There is also a good range of Mounts - Compression on the Small Parts and Bearings website.


Leadscrews


Leadscrews - Metric - Rolled Thread - Stainless Steel
Leadscrews - Metric - Rolled Thread - Stainless Steel

Also see combined categories:
All Metric Leadscrews

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Stainless steel. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Related Information:


Pulley Blocks


Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed. This category may be available in the new MBA online store at Pulleys - Blocks - Eye - Swivel.

There is also a good range of Pulleys - Blocks - Eye - Swivel on the Small Parts and Bearings website.


Cam Followers


Roller Followers - Needle Roller Type - Full Complement - Sealed
Roller Followers - Needle Roller Type - Full Complement - Sealed


Non separable roller followers

Inner ring has oil hole and oil groove. Prepacked with grease. Full complement typr with inner ring. This category may be available in the new MBA online store at Roller Followers - Needle Roller Type - Full Complement - Sealed.


Mounts Rectangular


Mounts - Rectangular - 4 Bolt
Mounts - Rectangular - 4 Bolt

Also see combined categories:
All Rectangular Mounts

Rectangular elastomer component bonded with two steel plates.

Low installation height provides good stability. Effectively isolates against horizontal and vertical vibrations. High deflection capacity in horiziontal direction whilst deflection is low in vertical. Oil and grease resistant. Meets OSHA anchoring standards. Ideal use in presses, blowers, pumps, vibrators, rolling mills, crushers etc.

Related Information:

There is also a good range of Mounts - Rectangular - 4 Bolt on the Small Parts and Bearings website.


Knobs Round


Knobs - Round - Male - Soft
Knobs - Round - Male - Soft

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud. This category may be available in the new MBA online store at Knobs - Round - Male - Soft.

Related Information:

There is also a good range of Knobs - Round - Male - Soft on the Small Parts and Bearings website.


O-Rings


O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Also see combined categories:
All O-Rings

General purpose. Includes o-rings for dental handpiece applications.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at O-Rings - Nitrile Rubber.

Related Information:

There is also a good range of O-Rings - Nitrile Rubber on the Small Parts and Bearings website.


Isolators


Mounts - Vibration - Isolation - Compression - Stainless Steel
Mounts - Vibration - Isolation - Compression - Stainless Steel


Compression shear mounts for harsh environments.

Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.

Related Information:

There is also a good range of Mounts - Vibration - Isolation - Compression - Stainless Steel on the Small Parts and Bearings website.


O-Rings


O-Rings - Quad
O-Rings - Quad

Also see combined categories:
All O-Rings

Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings. This category may be available in the new MBA online store at O-Rings - Quad.

Related Information:

There is also a good range of O-Rings - Quad on the Small Parts and Bearings website.


Rail Systems - Miniature Profile
Rail Systems - Miniature Profile

Also see combined categories:
All Linear Slides

Ideal for precision applications where mounting space is limited

Gothic arch grooves at raceway contacts enables slide to sustain loads & movement from any direction. Made from stainless steel or plastic for corrosion resistance. End caps have oil holes for easy relubrication. This category may be available in the new MBA online store at Rail Systems - Miniature Profile.

There is also a good range of Rail Systems - Miniature Profile on the Small Parts and Bearings website.


O-Rings - Cord
O-Rings - Cord


Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.

Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (Viton(R)): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. This category may be available in the new MBA online store at O-Rings - Cord.

Related Information:

There is also a good range of O-Rings - Cord on the Small Parts and Bearings website.


O-Rings - Neoprene Rubber
O-Rings - Neoprene Rubber

Also see combined categories:
All O-Rings

Excellent resistance to ageing and weathering effects.

Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones. This category may be available in the new MBA online store at O-Rings - Neoprene Rubber.

Related Information:

There is also a good range of O-Rings - Neoprene Rubber on the Small Parts and Bearings website.


Mounts - Vibration - Isolation - Cup Style 2
Mounts - Vibration - Isolation - Cup Style 2

Also see combined categories:
All Cup Mounts

Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.

High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils. This category may be available in the new MBA online store at Mounts - Vibration - Isolation - Cup Style 2.

Related Information:

There is also a good range of Mounts - Vibration - Isolation - Cup Style 2 on the Small Parts and Bearings website.


Mounts - Leveling - Studded - Machine - Cushioned
Mounts - Leveling - Studded - Machine - Cushioned


Levelling adjusters. Reduces noise and vibration on heavy machinery, compressors and presses.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position. This category may be available in the new MBA online store at Mounts - Leveling - Studded - Machine - Cushioned.

There is also a good range of Mounts - Leveling - Studded - Machine - Cushioned on the Small Parts and Bearings website.


Mounts - Leveling - Studded - Elastomer Base - OSHA Yellow
Mounts - Leveling - Studded - Elastomer Base - OSHA Yellow

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.

Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load. OSHA Yellow Steel Cover over elastomer base.

There is also a good range of Mounts - Leveling - Studded - Elastomer Base - OSHA Yellow on the Small Parts and Bearings website.


Screws - Low Head - Socket - 316L Stainless
Screws - Low Head - Socket - 316L Stainless

Also see combined categories:
All Machine Screws
All Socket Cap Screws

316L Stainless Steel. Other sizes available on request.

Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles. This category may be available in the new MBA online store at Screws - Low Head - Socket - 316L Stainless.

There is also a good range of Screws - Low Head - Socket - 316L Stainless on the Small Parts and Bearings website.


Pins - Coiled - Plain - Heavy Duty
Pins - Coiled - Plain - Heavy Duty

Also see combined categories:
All Coiled Pins

ASME B18.8.3M / ISO 8748 Heavy Duty Spirol Pins. Coiled roll pin.

This category may be available in the new MBA online store at Pins - Coiled - Plain - Heavy Duty.

Related Information:

There is also a good range of Pins - Coiled - Plain - Heavy Duty on the Small Parts and Bearings website.


Pins - Coiled - Plain - Standard Duty
Pins - Coiled - Plain - Standard Duty

Also see combined categories:
All Coiled Pins

ASME B18.8.3M / ISO 8750 Standard Duty Spirol Pins. Coiled roll pin.

This category may be available in the new MBA online store at Pins - Coiled - Plain - Standard Duty.

Related Information:

There is also a good range of Pins - Coiled - Plain - Standard Duty on the Small Parts and Bearings website.


Pins - Coiled - Stainless Steel - Heavy Duty
Pins - Coiled - Stainless Steel - Heavy Duty

Also see combined categories:
All Coiled Pins

Spirol Pins. Coiled roll pin.

This category may be available in the new MBA online store at Pins - Coiled - Stainless Steel - Heavy Duty.

Related Information:

There is also a good range of Pins - Coiled - Stainless Steel - Heavy Duty on the Small Parts and Bearings website.


Pins - Coiled - Stainless Steel - Standard Duty
Pins - Coiled - Stainless Steel - Standard Duty

Also see combined categories:
All Coiled Pins

Spirol Pins. Coiled roll pin.

This category may be available in the new MBA online store at Pins - Coiled - Stainless Steel - Standard Duty.

Related Information:

There is also a good range of Pins - Coiled - Stainless Steel - Standard Duty on the Small Parts and Bearings website.


R Clips - Double Coil - Steel
R Clips - Double Coil - Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins

Material: Spring Wire. This category may be available in the new MBA online store at R Clips - Double Coil - Steel.

There is also a good range of R Clips - Double Coil - Steel on the Small Parts and Bearings website.


R Clips - Single Coil - Stainless Steel
R Clips - Single Coil - Stainless Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins

This category may be available in the new MBA online store at R Clips - Single Coil - Stainless Steel.

There is also a good range of R Clips - Single Coil - Stainless Steel on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.