Miniature Bearings Australia Pty Ltd

O Rings For Dental Applications Categories


Bearings for Dental Equipment


Bearings - Dental Applications
Bearings - Dental Applications


See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.

There is also a good range of Bearings - Dental Applications on the Small Parts and Bearings website.


You may also be interested in

O-Rings for Dental Applications


O-Rings - Dental
O-Rings - Dental


Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:

There is also a good range of O-Rings - Dental on the Small Parts and Bearings website.


O-Rings


O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Also see combined categories:
All O-Rings

General purpose. Includes o-rings for dental handpiece applications.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Related Information:

There is also a good range of O-Rings - Nitrile Rubber on the Small Parts and Bearings website.


O-Rings - Silicone Rubber
O-Rings - Silicone Rubber

Also see combined categories:
All O-Rings

High thermal resistance and cold flexibility. Some dental applications are included in the listings.

Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.

Related Information:

There is also a good range of O-Rings - Silicone Rubber on the Small Parts and Bearings website.


Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.

There is also a good range of Snap Rings - Internal - Basic on the Small Parts and Bearings website.


Washers - Bevel
Washers - Bevel


For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.

There is also a good range of Washers - Bevel on the Small Parts and Bearings website.


Pins - Ball Lock - Marine Style - Ring
Pins - Ball Lock - Marine Style - Ring

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel.

Related Information:

There is also a good range of Pins - Ball Lock - Marine Style - Ring on the Small Parts and Bearings website.


Pins - Ball Lock - Marine Style - Half Ring
Pins - Ball Lock - Marine Style - Half Ring

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel.

Related Information:

There is also a good range of Pins - Ball Lock - Marine Style - Half Ring on the Small Parts and Bearings website.


Circlips - External - Round Section
Circlips - External - Round Section

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.

Related Information:

There is also a good range of Circlips - External - Round Section on the Small Parts and Bearings website.


Circlips - Internal - Round Section
Circlips - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.

Related Information:

There is also a good range of Circlips - Internal - Round Section on the Small Parts and Bearings website.


Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD


Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:

There is also a good range of Bearings - Gothic Groove Profile OD on the Small Parts and Bearings website.


Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.

There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.


Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.

There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.


Rings - Tolerance
Rings - Tolerance


Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.

There is also a good range of Rings - Tolerance on the Small Parts and Bearings website.


Spiral Rings - Internal - Light Duty
Spiral Rings - Internal - Light Duty

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.

There is also a good range of Spiral Rings - Internal - Light Duty on the Small Parts and Bearings website.


Bearings and Oring kits - for Dental Handpieces
Bearings and Oring kits - for Dental Handpieces


Kits of Bearings - Orings - and Washers.


Related Information:

There is also a good range of Bearings and Oring kits - for Dental Handpieces on the Small Parts and Bearings website.


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications


Special acetal bearings for disk cleaning


There is also a good range of Bearings - Acetal - Disk Cleaning Applications on the Small Parts and Bearings website.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic
Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic on the Small Parts and Bearings website.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel on the Small Parts and Bearings website.


Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

There is also a good range of Mounts - Leveling - Hygienic - Anchoring - One Hole on the Small Parts and Bearings website.


Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

There is also a good range of Mounts - Leveling - Hygienic - Anchoring - Two Hole on the Small Parts and Bearings website.


Mounts - Vibration - Isolation - Compression - Stainless Steel
Mounts - Vibration - Isolation - Compression - Stainless Steel


Compression shear mounts for harsh environments.

Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.

There is also a good range of Mounts - Vibration - Isolation - Compression - Stainless Steel on the Small Parts and Bearings website.


Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.

There is also a good range of Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel on the Small Parts and Bearings website.


Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.

There is also a good range of Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel

Also see combined categories:
All Eye Bolts

304 Stainless Steel

Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel on the Small Parts and Bearings website.


Springs - Urethane
Springs - Urethane

Also see combined categories:
All Rubber Springs

Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.

They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 oC.

Related Information:

There is also a good range of Springs - Urethane on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Radial on the Small Parts and Bearings website.


Rollers - Bearing - Nylon Covered
Rollers - Bearing - Nylon Covered

Also see combined categories:
All Tyred OD Bearings
All Rollers

Nylon tyred rollers for heavy duty applications

Nylon tyre (tire) covering a precision deep groove radial ball bearings.

Related Information:

There is also a good range of Rollers - Bearing - Nylon Covered on the Small Parts and Bearings website.


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.


Bearings - Linear - Sliding - Ceramic Coated
Bearings - Linear - Sliding - Ceramic Coated

Also see combined categories:
All Sliding Linear Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.

There is also a good range of Bearings - Linear - Sliding - Ceramic Coated on the Small Parts and Bearings website.


Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:

There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Radial on the Small Parts and Bearings website.


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

There is also a good range of Rod - Round - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - High Speed Cage
Bearings - Ball - High Speed Cage

Also see combined categories:
All Radial Ball Bearings

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Related Information:

There is also a good range of Bearings - Ball - High Speed Cage on the Small Parts and Bearings website.


Bearings - Pressure Roller - With Urethane OD
Bearings - Pressure Roller - With Urethane OD

Also see combined categories:
All Tyred OD Bearings
All Rollers

Bearings with Urethane Tyre on OD for applications requiring frictional movement.

For applications including paper and card dispensing and rolling (eg ATM Machines).

Related Information:

There is also a good range of Bearings - Pressure Roller - With Urethane OD on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Angular Contact on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Small Parts and Bearings website.


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.

There is also a good range of Rod - Round - Soft Metal Packs on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Carbon Steel on the Small Parts and Bearings website.


Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure


Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:

There is also a good range of Bearings - Hydrodynamic Pressure on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.


Springs - Extension - Music Wire
Springs - Extension - Music Wire

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:

There is also a good range of Springs - Extension - Music Wire on the Small Parts and Bearings website.


Springs - Extension - Stainless Steel
Springs - Extension - Stainless Steel

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:

There is also a good range of Springs - Extension - Stainless Steel on the Small Parts and Bearings website.


Mounts - Machinery - Industrial - Pneumatic Elastomeric
Mounts - Machinery - Industrial - Pneumatic Elastomeric

Also see combined categories:
All Industrial Machine Mounts

Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.

Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.

There is also a good range of Mounts - Machinery - Industrial - Pneumatic Elastomeric on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated on the Small Parts and Bearings website.


Tools - Wire Working
Tools - Wire Working

Also see combined categories:
All Tools

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.


Related Information:

There is also a good range of Tools - Wire Working on the Small Parts and Bearings website.


Housings - Bearing - Tapped Base Unit - Stainless
Housings - Bearing - Tapped Base Unit - Stainless


Full stainless steel bearing units are the best solution for hostile chemical washdown applications. All metal bearing insert components are a combination of 302, 304 and 440 stainless steel. Seals are silicone rubber. Grease is H-1 food grade.

Operating temperature minus 20 oC to +120 deg C. Solid 304 stainless housings have a machined base and extremely smooth surface finish, essential for demanding washdown installations. These housings do not experience flaking, cracking or discolouration and are virtually unaffected by scrapes. Bearings are removable. Food grade.

There is also a good range of Housings - Bearing - Tapped Base Unit - Stainless on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122209 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122209 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.