O RINGS CATEGORIES
O-Rings
O-Rings - Quad
Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.
Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings.
Related Information:
There is also a good range of O-Rings - Quad on the Small Parts and Bearings website.
O-Rings for Dental Applications
O-Rings - Dental
Special Orings for Dental Applications.
Special Orings for Dental Applications.
Related Information:
There is also a good range of O-Rings - Dental on the Small Parts and Bearings website.
O-Rings
O-Rings - Cord
Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.
Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (Viton(R)): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis.
Related Information:
There is also a good range of O-Rings - Cord on the Small Parts and Bearings website.
O-Rings - EPDM Rubber
Suitable for heated water and steam.
Temperature Range: -55oC to +150oC. Chemically resistant to Hydraulic Fluids. Resistant to alcohols, glycol engine coolants and SKY-DROL (phosphate ester hydraulic fluid).
Related Information:
There is also a good range of O-Rings - EPDM Rubber on the Small Parts and Bearings website.
O-Rings - Fluoroelastomer
Viton(R) A for high temperature and chemical resistance.
Temperature Range: -20oC to +200oC. Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. Viton(R) is a registered trademark of Dupont Corporation. Viton is usually supplied brown, but black may be substituted when brown is unavailable.
Related Information:
There is also a good range of O-Rings - Fluoroelastomer on the Small Parts and Bearings website.
O-Rings - Neoprene Rubber
Excellent resistance to ageing and weathering effects.
Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones.
Related Information:
There is also a good range of O-Rings - Neoprene Rubber on the Small Parts and Bearings website.
O-Rings - Nitrile Rubber
General purpose. Includes o-rings for dental handpiece applications.
Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.
Related Information:
There is also a good range of O-Rings - Nitrile Rubber on the Small Parts and Bearings website.
O-Rings - Silicone Rubber
High thermal resistance and cold flexibility. Some dental applications are included in the listings. Commonly used in food appliactions.
Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.
Related Information:
There is also a good range of O-Rings - Silicone Rubber on the Small Parts and Bearings website.
You may also be interested in
Bearings for Dental Equipment
Bearings - Dental Applications
See Dental Handpiece Bearings and Orings for applications by model.
This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.
There is also a good range of Bearings - Dental Applications on the Small Parts and Bearings website.
Assortments
Assortment Kits - Various
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins
There is also a good range of Assortment Kits - Various on the Small Parts and Bearings website.
Pulleys Grooved
Pulleys - U Groove - Idler - Steel - With Bearing
Steel with Steel Ball Bearings
Use with round belts such as Rounthane or O-Rings.
Related Information:
There is also a good range of Pulleys - U Groove - Idler - Steel - With Bearing on the Small Parts and Bearings website.
Pulleys - U Groove - Plastic
Acetal Body with Brass Insert. Use with O-Rings or Rounthane Belts.
Related Information:
There is also a good range of Pulleys - U Groove - Plastic on the Small Parts and Bearings website.
Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Plastic and Steel with Steel Ball Bearings or Plain Bearings.
Use with round belts such as Rounthane or O-Rings.
Related Information:
There is also a good range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on the Small Parts and Bearings website.
Pulleys - U Groove - Idler - Plastic - With Plain Bore
Plastic and Steel with Steel Ball Bearings or Plain Bearings.
Use with round belts such as Rounthane or O-Rings.
Related Information:
There is also a good range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on the Small Parts and Bearings website.
Clamping Rings
Rings - Retaining - C Type External - For Linear Bearings
Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.
There is also a good range of Rings - Retaining - C Type External - For Linear Bearings on the Small Parts and Bearings website.
Rings - Retaining - PR Type Internal - For Linear Bearings
Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.
There is also a good range of Rings - Retaining - PR Type Internal - For Linear Bearings on the Small Parts and Bearings website.
Rings - Split - Stainless Steel
316 stainless steel wire rings.
There is also a good range of Rings - Split - Stainless Steel on the Small Parts and Bearings website.
Rings - Split - Zinc Plated Steel
Zinc plated hard drawn steel wire rings.
There is also a good range of Rings - Split - Zinc Plated Steel on the Small Parts and Bearings website.
Clips
Rings - Crescent
Variation of an E-Clip with an open face. Also known as a C-Clip.
Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.
Related Information:
There is also a good range of Rings - Crescent on the Small Parts and Bearings website.
Rings - D - Nickel Plated
Nickel plated D Rings
There is also a good range of Rings - D - Nickel Plated on the Small Parts and Bearings website.
Rings - Round - Nickel Plated
Nickel plated round rings
There is also a good range of Rings - Round - Nickel Plated on the Small Parts and Bearings website.
Tolerance Rings
Rings - Tolerance
Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.
Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.
There is also a good range of Rings - Tolerance on the Small Parts and Bearings website.
Hoist Rings
Rings - Hoist - Heavy Duty
Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.
Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.
There is also a good range of Rings - Hoist - Heavy Duty on the Small Parts and Bearings website.
Rings - Hoist - Heavy Duty - MIL-STD1365
Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.
100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.
There is also a good range of Rings - Hoist - Heavy Duty - MIL-STD1365 on the Small Parts and Bearings website.
Rings - Hoist - Safety Engineered
Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.
100 percent magnetic particle inspected.
There is also a good range of Rings - Hoist - Safety Engineered on the Small Parts and Bearings website.
Rings - Hoist - Side Pull - External Wrench Mount
Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.
Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.
There is also a good range of Rings - Hoist - Side Pull - External Wrench Mount on the Small Parts and Bearings website.
Rings - Hoist - Side Pull - Full Swivel
Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.
Individually pull tested and certified.
There is also a good range of Rings - Hoist - Side Pull - Full Swivel on the Small Parts and Bearings website.
Rings - Hoist - Side Pull - Internal-External Wrench Mount
Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.
Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.
There is also a good range of Rings - Hoist - Side Pull - Internal-External Wrench Mount on the Small Parts and Bearings website.
Rings - Hoist - Stationary - With Screws
Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.
Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.
There is also a good range of Rings - Hoist - Stationary - With Screws on the Small Parts and Bearings website.
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.
safety factor of 5 to 1. Installation tool sold separately.
Related Information:
There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel on the Small Parts and Bearings website.
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.
safety factor of 5 to 1. Installation tool sold separately.
Related Information:
There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel on the Small Parts and Bearings website.
Rings - Hoist - With Ball Bearings
Multidirectional loading with design factor 4 to 1
Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.
There is also a good range of Rings - Hoist - With Ball Bearings on the Small Parts and Bearings website.
Rings - Lift - Universal
For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.
There is also a good range of Rings - Lift - Universal on the Small Parts and Bearings website.
Backup Rings
Rings - Backup
Durometer 90 Nitrile Rubber back up rings.
There is also a good range of Rings - Backup on the Small Parts and Bearings website.
Clamping Rings
Spiral Rings - External - Heavy Duty
AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.
There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.
Spiral Rings - External - Medium Duty
AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.
There is also a good range of Spiral Rings - External - Medium Duty on the Small Parts and Bearings website.
Spiral Rings - External - Medium-Heavy Duty
AME / WST / RST - Spring Steel and Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST.
There is also a good range of Spiral Rings - External - Medium-Heavy Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Heavy Duty
Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.
There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Light Duty
Includes series CI / VH / UR - Spring Steel and Stainless Steel.
Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.
There is also a good range of Spiral Rings - Internal - Light Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Medium Duty
Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.
There is also a good range of Spiral Rings - Internal - Medium Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Medium-Heavy Duty
Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.
There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty on the Small Parts and Bearings website.
Clips
Snap Rings - External - Basic
Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.
Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment.
There is also a good range of Snap Rings - External - Basic on the Small Parts and Bearings website.
Snap Rings - Internal - Basic
M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.
Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.
There is also a good range of Snap Rings - Internal - Basic on the Small Parts and Bearings website.
Snap Rings - Internal - Stainless Steel
Internal snaprings are similar to an internal circlip without the lugs
301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.
There is also a good range of Snap Rings - Internal - Stainless Steel on the Small Parts and Bearings website.
Plungers Spring
Plungers - Spring - Ring Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic
Steel body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 122538 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
