Miniature Bearings Australia Pty Ltd

O Rings


O-Rings


O-Rings - Quad
O-Rings - Quad

Also see combined categories:
All O-Rings

Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings.


There is also a good range of O-Rings - Quad on the Small Parts and Bearings website.

O-Rings for Dental Applications


O-Rings - Dental
O-Rings - Dental

Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:
Dental Handpiece Parts - Miscellaneous
Dental Bearings
Tools for Dental Handpiece Repair

There is also a good range of O-Rings - Dental on the Small Parts and Bearings website.

O-Rings


O-Rings - Cord
O-Rings - Cord

Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.

Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (Viton(R)): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis.


There is also a good range of O-Rings - Cord on the Small Parts and Bearings website.

O-Rings - EPDM Rubber
O-Rings - EPDM Rubber

Also see combined categories:
All O-Rings

Suitable for heated water and steam.

Temperature Range: -55oC to +150oC. Chemically resistant to Hydraulic Fluids. Resistant to alcohols, glycol engine coolants and SKY-DROL (phosphate ester hydraulic fluid).


There is also a good range of O-Rings - EPDM Rubber on the Small Parts and Bearings website.

O-Rings - Fluoroelastomer
O-Rings - Fluoroelastomer

Also see combined categories:
All O-Rings

Viton(R) A for high temperature and chemical resistance.

Temperature Range: -20oC to +200oC. Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. Viton(R) is a registered trademark of Dupont Corporation. Viton is usually supplied brown, but black may be substituted when brown is unavailable.


There is also a good range of O-Rings - Fluoroelastomer on the Small Parts and Bearings website.

O-Rings - Neoprene Rubber
O-Rings - Neoprene Rubber

Also see combined categories:
All O-Rings

Excellent resistance to ageing and weathering effects.

Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones.

Related Information:
U Groove Pulleys

There is also a good range of O-Rings - Neoprene Rubber on the Small Parts and Bearings website.

O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Also see combined categories:
All O-Rings

General purpose. Includes o-rings for dental handpiece applications.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Related Information:
U Groove Pulleys

There is also a good range of O-Rings - Nitrile Rubber on the Small Parts and Bearings website.

O-Rings - Silicone Rubber
O-Rings - Silicone Rubber

Also see combined categories:
All O-Rings

High thermal resistance and cold flexibility. Some dental applications are included in the listings.

Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.


There is also a good range of O-Rings - Silicone Rubber on the Small Parts and Bearings website.

Dental Bearing Kits


Bearings and Oring kits for Dental Handpieces
Bearings and Oring kits for Dental Handpieces

Kits of Bearings - Orings - and Washers.

Related Information:
Dental O-Rings
Dental Parts - Miscellaneous
Tools for Dental Handpiece Repair

There is also a good range of Bearings and Oring kits for Dental Handpieces on the Small Parts and Bearings website.

You may also like

Bearings for Dental Equipment


Bearings - Dental Applications
Bearings - Dental Applications

See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.


There is also a good range of Bearings - Dental Applications on the Small Parts and Bearings website.

Assortments


Assortment Kits - Various
Assortment Kits - Various

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


There is also a good range of Assortment Kits - Various on the Small Parts and Bearings website.

Pulleys Grooved


Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Idler - Steel - With Bearing on the Small Parts and Bearings website.

Pulleys - U Groove - Plastic
Pulleys - U Groove - Plastic

Also see combined categories:
All U Groove Bearings and Pulleys

Acetal Body with Brass Insert. Use with O-Rings or Rounthane Belts.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Plastic on the Small Parts and Bearings website.

Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on the Small Parts and Bearings website.

Pulleys - U Groove - Plastic - Hobby
Pulleys - U Groove - Plastic - Hobby

Also see combined categories:
All U Groove Bearings and Pulleys

Plastic with no locking method. Use with O-Rings or Rounthane Belts.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Plastic - Hobby on the Small Parts and Bearings website.

Pulleys - U Groove - Idler - Plastic - With Plain Bore
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:
O-Rings to suit U Groove Pulleys
Rounthane Belts

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on the Small Parts and Bearings website.

Clamping Rings


Rings - Retaining - C Type External - For Linear Bearings
Rings - Retaining - C Type External - For Linear Bearings

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.


There is also a good range of Rings - Retaining - C Type External - For Linear Bearings on the Small Parts and Bearings website.

Rings - Retaining - PR Type Internal - For Linear Bearings
Rings - Retaining - PR Type Internal - For Linear Bearings

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


There is also a good range of Rings - Retaining - PR Type Internal - For Linear Bearings on the Small Parts and Bearings website.

Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Also see combined categories:
All Split Rings

316 stainless steel wire rings.


There is also a good range of Rings - Split - Stainless Steel on the Small Parts and Bearings website.

Rings - Split - Zinc Plated Steel
Rings - Split - Zinc Plated Steel

Also see combined categories:
All Split Rings

Zinc plated hard drawn steel wire rings.


There is also a good range of Rings - Split - Zinc Plated Steel on the Small Parts and Bearings website.

Clips


Rings - Crescent
Rings - Crescent

Variation of an E-Clip with an open face. Also known as a C-Clip.

Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.

Related Information:
Other circlip types

There is also a good range of Rings - Crescent on the Small Parts and Bearings website.

Rings - D - Nickel Plated
Rings - D - Nickel Plated

Nickel plated D Rings


There is also a good range of Rings - D - Nickel Plated on the Small Parts and Bearings website.

Rings - Round - Nickel Plated
Rings - Round - Nickel Plated

Nickel plated round rings


There is also a good range of Rings - Round - Nickel Plated on the Small Parts and Bearings website.

Tolerance Rings


Rings - Tolerance
Rings - Tolerance

Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.


There is also a good range of Rings - Tolerance on the Small Parts and Bearings website.

Hoist Rings


Rings - Hoist - Bar-Tite -tm-
Rings - Hoist - Bar-Tite -tm-

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot, 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor minimum 5 to 1. Black oxide finish per Mil C-13924B. Certified heat treatment.


There is also a good range of Rings - Hoist - Bar-Tite -tm- on the Small Parts and Bearings website.

Rings - Hoist - Heavy Duty
Rings - Hoist - Heavy Duty

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.


There is also a good range of Rings - Hoist - Heavy Duty on the Small Parts and Bearings website.

Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.


There is also a good range of Rings - Hoist - Heavy Duty - MIL-STD1365 on the Small Parts and Bearings website.

Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.


There is also a good range of Rings - Hoist - Safety Engineered on the Small Parts and Bearings website.

Rings - Hoist - Side Pull - External Wrench Mount
Rings - Hoist - Side Pull - External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


There is also a good range of Rings - Hoist - Side Pull - External Wrench Mount on the Small Parts and Bearings website.

Rings - Hoist - Side Pull - Full Swivel
Rings - Hoist - Side Pull - Full Swivel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.


There is also a good range of Rings - Hoist - Side Pull - Full Swivel on the Small Parts and Bearings website.

Rings - Hoist - Side Pull - Internal-External Wrench Mount
Rings - Hoist - Side Pull - Internal-External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


There is also a good range of Rings - Hoist - Side Pull - Internal-External Wrench Mount on the Small Parts and Bearings website.

Rings - Hoist - Stationary - Without Screws
Rings - Hoist - Stationary - Without Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Related Information:
Screws for Hoist Rings

There is also a good range of Rings - Hoist - Stationary - Without Screws on the Small Parts and Bearings website.

Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.


There is also a good range of Rings - Hoist - Stationary - With Screws on the Small Parts and Bearings website.

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:
Installation Tools

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel on the Small Parts and Bearings website.

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:
Installation Tools

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel on the Small Parts and Bearings website.

Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.


There is also a good range of Rings - Hoist - With Ball Bearings on the Small Parts and Bearings website.

Rings - Lift - Universal
Rings - Lift - Universal

For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.


There is also a good range of Rings - Lift - Universal on the Small Parts and Bearings website.

Backup Rings


Rings - Backup
Rings - Backup

Durometer 90 Nitrile Rubber back up rings.


There is also a good range of Rings - Backup on the Small Parts and Bearings website.

Clamping Rings


Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.


There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.

Spiral Rings - External - Medium Duty
Spiral Rings - External - Medium Duty

Also see combined categories:
All External Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.


There is also a good range of Spiral Rings - External - Medium Duty on the Small Parts and Bearings website.

Spiral Rings - External - Medium-Heavy Duty
Spiral Rings - External - Medium-Heavy Duty

Also see combined categories:
All External Spiral Rings

AME / WST / RST - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST.


There is also a good range of Spiral Rings - External - Medium-Heavy Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.


There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Light Duty
Spiral Rings - Internal - Light Duty

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.


There is also a good range of Spiral Rings - Internal - Light Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Medium Duty
Spiral Rings - Internal - Medium Duty

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.


There is also a good range of Spiral Rings - Internal - Medium Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Medium-Heavy Duty
Spiral Rings - Internal - Medium-Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.


There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty on the Small Parts and Bearings website.

Clips


Snap Rings - External - Basic
Snap Rings - External - Basic

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment.


There is also a good range of Snap Rings - External - Basic on the Small Parts and Bearings website.

Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.


There is also a good range of Snap Rings - Internal - Basic on the Small Parts and Bearings website.

Plungers Spring


Plungers - Spring - Ring Handle - Locking - Stainless
Plungers - Spring - Ring Handle - Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Locking - Stainless on the Small Parts and Bearings website.

Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic on the Small Parts and Bearings website.

Plungers - Spring - Ring Handle - Locking - Steel
Plungers - Spring - Ring Handle - Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Locking - Steel on the Small Parts and Bearings website.

Plungers - Spring - Ring Handle - Locking - Steel-Phenolic
Plungers - Spring - Ring Handle - Locking - Steel-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Locking - Steel-Phenolic on the Small Parts and Bearings website.

Plungers - Spring - Ring Handle - Non Locking - Stainless
Plungers - Spring - Ring Handle - Non Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Stainless on the Small Parts and Bearings website.

Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic on the Small Parts and Bearings website.

Plungers - Spring - Ring Handle - Non Locking - Steel
Plungers - Spring - Ring Handle - Non Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Steel on the Small Parts and Bearings website.

Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic on the Small Parts and Bearings website.

Hoist Rings


Screws - For Rings - Hoist
Screws - For Rings - Hoist

High tensile cap screws for use with stationary hoist rings

Related Information:
Hoist Rings without Screws

There is also a good range of Screws - For Rings - Hoist on the Small Parts and Bearings website.

Hooks


Hooks - Rope Rings - Recessed
Hooks - Rope Rings - Recessed

Zinc plated


There is also a good range of Hooks - Rope Rings - Recessed on the Small Parts and Bearings website.

Magnets Alnico


Magnets - Alnico - Ring
Magnets - Alnico - Ring

Also see combined categories:
All Magnets
All Alnico Magnets

Cast Alnico 5


There is also a good range of Magnets - Alnico - Ring on the Small Parts and Bearings website.

Magnets Ceramic


Magnets - Ceramic Ring
Magnets - Ceramic Ring

Also see combined categories:
All Magnets
All Ceramic Magnets


There is also a good range of Magnets - Ceramic Ring on the Small Parts and Bearings website.

Handpiece Parts


Dental Handpiece Parts - Other
Dental Handpiece Parts - Other

A list of additional parts available for handpieces. Also see category Dental Handpiece Parts.

This category contains miscellaneous dental parts excluding tools, bearings and o-rings. Parts for specific handpiece models can be found under the brand name on the internet store main index.

Related Information:
Dental O-Rings
Dental Bearings
Tools for Dental Handpiece Repair

There is also a good range of Dental Handpiece Parts - Other on the Small Parts and Bearings website.

Castors Stud


Castors - Stud - Friction Ring - General Purpose - Swivel
Castors - Stud - Friction Ring - General Purpose - Swivel

Also see combined categories:
All Stud Type Castors


There is also a good range of Castors - Stud - Friction Ring - General Purpose - Swivel on the Small Parts and Bearings website.

Clips


Push In Retaining Rings - Carbon Steel
Push In Retaining Rings - Carbon Steel

Thrust load shown is calculated for ideal conditions with mild steel bore.


There is also a good range of Push In Retaining Rings - Carbon Steel on the Small Parts and Bearings website.

Push On Retaining Rings - Carbon Steel
Push On Retaining Rings - Carbon Steel

Also see combined categories:
All Push On Rings

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.


There is also a good range of Push On Retaining Rings - Carbon Steel on the Small Parts and Bearings website.

Push On Retaining Rings - Stainless Steel
Push On Retaining Rings - Stainless Steel

Also see combined categories:
All Push On Rings

Rotor Clip TY. Stainless Steel hardness HR15N 82.5-86

PH 15-7/17-7 Stainless Steel and 1.4310 Stainless Steel.


There is also a good range of Push On Retaining Rings - Stainless Steel on the Small Parts and Bearings website.

Plungers Spring


Plungers - Spring - Pull Ring - Locking - Stainless-Acetal
Plungers - Spring - Pull Ring - Locking - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Pull Ring - Locking - Stainless-Acetal on the Small Parts and Bearings website.

Plungers - Spring - Pull Ring - Locking - Steel-Acetal
Plungers - Spring - Pull Ring - Locking - Steel-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Pull Ring - Locking - Steel-Acetal on the Small Parts and Bearings website.

Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal
Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal on the Small Parts and Bearings website.

Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal
Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal on the Small Parts and Bearings website.

Pins Ball Lock


Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel
Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


There is also a good range of Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel on the Small Parts and Bearings website.

Pins - Ball Lock - Ring Handle - Industrial - Steel
Pins - Ball Lock - Ring Handle - Industrial - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


There is also a good range of Pins - Ball Lock - Ring Handle - Industrial - Steel on the Small Parts and Bearings website.

Hoist Rings


Nuts - Eye
Nuts - Eye

Max load value based on a safety factor of 5 to 1


There is also a good range of Nuts - Eye on the Small Parts and Bearings website.

Washers - Bevel
Washers - Bevel

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.


There is also a good range of Washers - Bevel on the Small Parts and Bearings website.

Bearings Needle Roller


Bearings - Needle Roller - Inner Rings
Bearings - Needle Roller - Inner Rings

Hardened sleeves for needle roller bearings.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Inner Rings on the Small Parts and Bearings website.

Bearings Pivot


Bearings - Pivot - With Inner Ring
Bearings - Pivot - With Inner Ring

Also see combined categories:
All Pivot Bearings

Note! Minimum quantities apply to production of these items.


There is also a good range of Bearings - Pivot - With Inner Ring on the Small Parts and Bearings website.

Bearings - Pivot - Without Inner Ring
Bearings - Pivot - Without Inner Ring

Also see combined categories:
All Pivot Bearings

Note! Minimum quantities apply to production of these items.


There is also a good range of Bearings - Pivot - Without Inner Ring on the Small Parts and Bearings website.

Bearings Single Row Ball


Bearings - Ball - With Snap Ring - Chrome Steel
Bearings - Ball - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:
Tolerances
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Ball - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.

Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:
Tolerances
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel on the Small Parts and Bearings website.

Hoist Rings


Eyes - Pad - Steel
Eyes - Pad - Steel

Carbon steel suitable for welding

Not for lifting.


There is also a good range of Eyes - Pad - Steel on the Small Parts and Bearings website.

Shock Absorbers


Shock Absorbers - Hydraulic - Lock Rings
Shock Absorbers - Hydraulic - Lock Rings

Also see combined categories:
All Shock Absorbers


There is also a good range of Shock Absorbers - Hydraulic - Lock Rings on the Small Parts and Bearings website.

Bearings Single Row Ball


Bearings - Ball - WIR - With Snap Ring - Chrome Steel
Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:
Tolerances
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.

Pins Ball Lock


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.


There is also a good range of Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel on the Small Parts and Bearings website.

Pins - Ball Lock - Marine Style - Ring
Pins - Ball Lock - Marine Style - Ring

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel.


There is also a good range of Pins - Ball Lock - Marine Style - Ring on the Small Parts and Bearings website.

Pins - Ball Lock - Shoulder Type - Ring Handle
Pins - Ball Lock - Shoulder Type - Ring Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Also called detent pins.


There is also a good range of Pins - Ball Lock - Shoulder Type - Ring Handle on the Small Parts and Bearings website.

Hoist Rings


Shackles - Anchor - Bolt Type
Shackles - Anchor - Bolt Type

Minimum ultimate load is 6 times the working load limit

Bolt type anchor shackles supplied with thin head bolt and nut with cotter pin. Meets US Federal Specification RR - C, Type IVA, Grade A, Class 3.


There is also a good range of Shackles - Anchor - Bolt Type on the Small Parts and Bearings website.

Bearings Needle Roller


Bearings - Needle Roller - Machined - With Inner Ring
Bearings - Needle Roller - Machined - With Inner Ring

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Machined - With Inner Ring on the Small Parts and Bearings website.


Pins Ball Lock


Pins - Ball Lock - Marine Style - Half Ring
Pins - Ball Lock - Marine Style - Half Ring

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel.


There is also a good range of Pins - Ball Lock - Marine Style - Half Ring on the Small Parts and Bearings website.

Circlips


E-Clips - Klipring
E-Clips - Klipring

Also see combined categories:
All E-Clips

Also known as Poodle Rings - Imperial - N1504 / NKP


There is also a good range of E-Clips - Klipring on the Small Parts and Bearings website.

Pins General


Pins - Clik - Carbon Steel
Pins - Clik - Carbon Steel

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.


There is also a good range of Pins - Clik - Carbon Steel on the Small Parts and Bearings website.

Pins - Clik - Mild Steel
Pins - Clik - Mild Steel

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.


There is also a good range of Pins - Clik - Mild Steel on the Small Parts and Bearings website.

Circlips


Circlips - External - Round Section
Circlips - External - Round Section

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.


There is also a good range of Circlips - External - Round Section on the Small Parts and Bearings website.

Circlips - External - Tabbed
Circlips - External - Tabbed

Also see combined categories:
All External Circlips

DIN 983 / D2100 / AK. Retaining rings. Snap Rings (USA).

External tabs are concentrically positioned for positioning in a concealed assembly. Tabs act as spacers for securing machine components. Conforming to DIN 983.


There is also a good range of Circlips - External - Tabbed on the Small Parts and Bearings website.

Circlips - Internal - Inverted
Circlips - Internal - Inverted

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers.


There is also a good range of Circlips - Internal - Inverted on the Small Parts and Bearings website.

Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components.


There is also a good range of Circlips - Internal - Tabbed on the Small Parts and Bearings website.

Circlips - Internal - Bevelled
Circlips - Internal - Bevelled

Also see combined categories:
All Internal Circlips

N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments.


There is also a good range of Circlips - Internal - Bevelled on the Small Parts and Bearings website.

Pins General


Pins - Clik - Stainless Steel 316 Grade
Pins - Clik - Stainless Steel 316 Grade

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.


There is also a good range of Pins - Clik - Stainless Steel 316 Grade on the Small Parts and Bearings website.

Circlips


Circlips - Internal - Round Section
Circlips - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.


There is also a good range of Circlips - Internal - Round Section on the Small Parts and Bearings website.

Circlips - External - Standard - Berryllium Copper
Circlips - External - Standard - Berryllium Copper

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Related Information:
Circlip Pliers
Stainless Steel External Circlips

There is also a good range of Circlips - External - Standard - Berryllium Copper on the Small Parts and Bearings website.

Circlips - External - Standard - Carbon Steel
Circlips - External - Standard - Carbon Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Plain carbon steel.

Related Information:
Circlip Pliers
Stainless Steel External Circlips

There is also a good range of Circlips - External - Standard - Carbon Steel on the Small Parts and Bearings website.

Circlips - External - Standard - Zinc Plated
Circlips - External - Standard - Zinc Plated

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel.

Related Information:
Circlip Pliers
Stainless Steel External Circlips

There is also a good range of Circlips - External - Standard - Zinc Plated on the Small Parts and Bearings website.

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.