Miniature Bearings Australia Pty Ltd

Nuts Lock Categories


Nuts - Lock - Tinnerman Palnut
Nuts - Lock - Tinnerman Palnut


Mechanical Copper Locknuts

This category may be available in the new MBA online store at Nuts - Lock - Tinnerman Palnut.

There is also a good range of Nuts - Lock - Tinnerman Palnut on the Small Parts and Bearings website.


Nuts - Aerotight
Nuts - Aerotight

Also see combined categories:
All Lock Nuts

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.

There is also a good range of Nuts - Aerotight on the Small Parts and Bearings website.


Nuts - Quick Release
Nuts - Quick Release

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning. This category may be available in the new MBA online store at Nuts - Quick Release.

There is also a good range of Nuts - Quick Release on the Small Parts and Bearings website.


Nuts - Weld - Steel
Nuts - Weld - Steel

Also see combined categories:
All Lock Nuts

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.

This category may be available in the new MBA online store at Nuts - Weld - Steel.

There is also a good range of Nuts - Weld - Steel on the Small Parts and Bearings website.


Nuts - Hexagonal - Binx - Steel
Nuts - Hexagonal - Binx - Steel

Also see combined categories:
All Lock Nuts

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear. This category may be available in the new MBA online store at Nuts - Hexagonal - Binx - Steel.

There is also a good range of Nuts - Hexagonal - Binx - Steel on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. This category may be available in the new MBA online store at Nuts - Hexagonal - Nylon Insert - Aluminium.

Related Information:

There is also a good range of Nuts - Hexagonal - Nylon Insert - Aluminium on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon Insert - Steel
Nuts - Hexagonal - Nylon Insert - Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. This category may be available in the new MBA online store at Nuts - Hexagonal - Nylon Insert - Steel.

There is also a good range of Nuts - Hexagonal - Nylon Insert - Steel on the Small Parts and Bearings website.


Locknuts - Stainless Insert
Locknuts - Stainless Insert


Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (P’) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.

Related Information:

There is also a good range of Locknuts - Stainless Insert on the Small Parts and Bearings website.


Nuts - Hexagonal - Binx - Stainless Steel 304
Nuts - Hexagonal - Binx - Stainless Steel 304

Also see combined categories:
All Lock Nuts

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear. This category may be available in the new MBA online store at Nuts - Hexagonal - Binx - Stainless Steel 304.

There is also a good range of Nuts - Hexagonal - Binx - Stainless Steel 304 on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nuts - Hexagonal - Nylon Insert - Stainless Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. This category may be available in the new MBA online store at Nuts - Hexagonal - Nylon Insert - Stainless Steel.

There is also a good range of Nuts - Hexagonal - Nylon Insert - Stainless Steel on the Small Parts and Bearings website.


Nuts Lock for Bearings


Nuts - Lock - For Bearings - Right Hand Thread - Standard AN-KM Series
Nuts - Lock - For Bearings - Right Hand Thread - Standard AN-KM Series

Also see combined categories:
All Lock Nuts for Bearings


There is also a good range of Nuts - Lock - For Bearings - Right Hand Thread - Standard AN-KM Series on the Small Parts and Bearings website.


You may also be interested in

Plungers Indexing


Nuts - Lock - For Indexing Plungers
Nuts - Lock - For Indexing Plungers


This category may be available in the new MBA online store at Nuts - Lock - For Indexing Plungers.

There is also a good range of Nuts - Lock - For Indexing Plungers on the Small Parts and Bearings website.


Shock Absorbers


Shock Absorbers - Lock Nuts
Shock Absorbers - Lock Nuts


This category may be available in the new MBA online store at Shock Absorbers - Lock Nuts.

There is also a good range of Shock Absorbers - Lock Nuts on the Small Parts and Bearings website.


Springs Disc


Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Related Information:

There is also a good range of Washers - Disc Spring - Flange Locking Type on the Small Parts and Bearings website.


Plungers Indexing


Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


There is also a good range of Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut on the Small Parts and Bearings website.


Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut
Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


There is also a good range of Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut on the Small Parts and Bearings website.


Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut

Also see combined categories:
All Indexing Plungers


There is also a good range of Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut on the Small Parts and Bearings website.


Plungers - Indexing - Grip - Stainless - With Nut
Plungers - Indexing - Grip - Stainless - With Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.

This category may be available in the new MBA online store at Plungers - Indexing - Grip - Stainless - With Nut.

There is also a good range of Plungers - Indexing - Grip - Stainless - With Nut on the Small Parts and Bearings website.


Plungers - Indexing - Grip - Stainless - Without Nut
Plungers - Indexing - Grip - Stainless - Without Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.

This category may be available in the new MBA online store at Plungers - Indexing - Grip - Stainless - Without Nut.

There is also a good range of Plungers - Indexing - Grip - Stainless - Without Nut on the Small Parts and Bearings website.


Plungers - Indexing - Grip - Steel - With Nut
Plungers - Indexing - Grip - Steel - With Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.

This category may be available in the new MBA online store at Plungers - Indexing - Grip - Steel - With Nut.

There is also a good range of Plungers - Indexing - Grip - Steel - With Nut on the Small Parts and Bearings website.


Plungers - Indexing - Grip - Steel - Without Nut
Plungers - Indexing - Grip - Steel - Without Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.

This category may be available in the new MBA online store at Plungers - Indexing - Grip - Steel - Without Nut.

There is also a good range of Plungers - Indexing - Grip - Steel - Without Nut on the Small Parts and Bearings website.


Washers Lock


Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel

Washers designed to be used to help prevent nuts from vibrating loose. This category may be available in the new MBA online store at Washers - Lock - Split - Stainless Steel.

There is also a good range of Washers - Lock - Split - Stainless Steel on the Small Parts and Bearings website.


Washers - Lock - Split - Steel
Washers - Lock - Split - Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

Plain and zinc plated

Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose. This category may be available in the new MBA online store at Washers - Lock - Split - Steel.

There is also a good range of Washers - Lock - Split - Steel on the Small Parts and Bearings website.


Washers - Lock - Tabbed - for Bearing Locknuts
Washers - Lock - Tabbed - for Bearing Locknuts

Also see combined categories:
All Tabbed Lock Washers
All Lock Washers

This category includes equivalents to AW, W, TW, MB, WH and WT types

For use with bearing lock nuts. This category may be available in the new MBA online store at Washers - Lock - Tabbed - for Bearing Locknuts.

There is also a good range of Washers - Lock - Tabbed - for Bearing Locknuts on the Small Parts and Bearings website.


Clamps


Clamp Kits - Timing Belt
Clamp Kits - Timing Belt


Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included. This category may be available in the new MBA online store at Clamp Kits - Timing Belt.

Related Information:

There is also a good range of Clamp Kits - Timing Belt on the Small Parts and Bearings website.


Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. This category may be available in the new MBA online store at Shaftloc-tm Sleeves - Single Ended.

Related Information:

There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.


Washers - Lock - Internal Tooth - Spring Steel
Washers - Lock - Internal Tooth - Spring Steel

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose. This category may be available in the new MBA online store at Washers - Lock - Internal Tooth - Spring Steel.

There is also a good range of Washers - Lock - Internal Tooth - Spring Steel on the Small Parts and Bearings website.


Washers - Lock - Internal Tooth - Stainless Steel
Washers - Lock - Internal Tooth - Stainless Steel

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose. This category may be available in the new MBA online store at Washers - Lock - Internal Tooth - Stainless Steel.

There is also a good range of Washers - Lock - Internal Tooth - Stainless Steel on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Round - Metallic on the Small Parts and Bearings website.


Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided. This category may be available in the new MBA online store at Plungers - Indexing - Cam Action - With Hex Nut.

Related Information:

There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.


Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided. This category may be available in the new MBA online store at Plungers - Indexing - Cam Action - Without Hex Nut.

Related Information:

There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.


Washers - Lock - Split - Titanium CP Grade 1
Washers - Lock - Split - Titanium CP Grade 1

Also see combined categories:
All Split Lock Washers
All Lock Washers

CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Dimensions are nominal and may vary between batches. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. Washers designed to be used to help prevent nuts from vibrating loose. This category may be available in the new MBA online store at Washers - Lock - Split - Titanium CP Grade 1.

There is also a good range of Washers - Lock - Split - Titanium CP Grade 1 on the Small Parts and Bearings website.


Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods. This category may be available in the new MBA online store at Cross Blocks - Heavy Duty - One Knob One Nut.

There is also a good range of Cross Blocks - Heavy Duty - One Knob One Nut on the Small Parts and Bearings website.


Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

There is also a good range of Assemblies - Locking - Flanged on the Small Parts and Bearings website.


Elements - Locking
Elements - Locking

Also see combined categories:
All Locking Assemblies

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8. This category may be available in the new MBA online store at Elements - Locking.

There is also a good range of Elements - Locking on the Small Parts and Bearings website.


Washers - Lock - External Tooth - Spring Steel
Washers - Lock - External Tooth - Spring Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches. This category may be available in the new MBA online store at Washers - Lock - External Tooth - Spring Steel.

There is also a good range of Washers - Lock - External Tooth - Spring Steel on the Small Parts and Bearings website.


Washers - Lock - External Tooth - Stainless Steel
Washers - Lock - External Tooth - Stainless Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches. This category may be available in the new MBA online store at Washers - Lock - External Tooth - Stainless Steel.

There is also a good range of Washers - Lock - External Tooth - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - 303 stainless Steel.

There is also a good range of Plungers - Indexing - Locking - With Knob - 303 stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Knob - Steel
Plungers - Indexing - Locking - With Knob - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - Steel.

There is also a good range of Plungers - Indexing - Locking - With Knob - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Plungers - Indexing - Locking - With Shoulder - Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Stainless Steel.

There is also a good range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Steel
Plungers - Indexing - Locking - With Shoulder - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Steel.

There is also a good range of Plungers - Indexing - Locking - With Shoulder - Steel on the Small Parts and Bearings website.


Pins - Ball Lock - Ball Handle - Plastic Handle
Pins - Ball Lock - Ball Handle - Plastic Handle

Also see combined categories:
All Ball Lock Pins

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.

Positive lock detent pins. Plastic Handles. 300 Grade Stainless Components. 440C Stainless Balls. This category may be available in the new MBA online store at Pins - Ball Lock - Ball Handle - Plastic Handle.

Related Information:

There is also a good range of Pins - Ball Lock - Ball Handle - Plastic Handle on the Small Parts and Bearings website.


Pins - Ball Lock - Button Handle - Commercial - 304 Stainless
Pins - Ball Lock - Button Handle - Commercial - 304 Stainless

Also see combined categories:
All Ball Lock Pins

Quick release. Commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.

Economical. Positive lock detent pins. Aluminium handles. 360 Brass Buttons. 304 Stainless Steel Shank and balls. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:

There is also a good range of Pins - Ball Lock - Button Handle - Commercial - 304 Stainless on the Small Parts and Bearings website.


Pins - Ball Lock - Button Handle - Stainless Steel
Pins - Ball Lock - Button Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.

Positive lock detent pins. Aluminium handles. 300 Grade Stainless Components. 440C Stainless Balls. This category may be available in the new MBA online store at Pins - Ball Lock - Button Handle - Stainless Steel.

Related Information:

There is also a good range of Pins - Ball Lock - Button Handle - Stainless Steel on the Small Parts and Bearings website.


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.

Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls. This category may be available in the new MBA online store at Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel.

Related Information:

There is also a good range of Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel on the Small Parts and Bearings website.


Pins - Ball Lock Flanged Receptacles
Pins - Ball Lock Flanged Receptacles

Also see combined categories:
All Ball Lock Receptacles

Provide a permanent and proper mating hole for commercial and industrial type quick release ball lock pins.

Designed to be used on materials or in applications where the positive lock detent pin does not have anything to lock against. Pin does not protrude past the bottom of the receptacle so they are ideal for blind hole applications. 303 Stainless Steel. Mounted with screws, rivets or bolts. The quick release ball lock pins are inserted from the flanged end, and the ball extends into the wider opening at the top of the receptacle.

Related Information:

There is also a good range of Pins - Ball Lock Flanged Receptacles on the Small Parts and Bearings website.


Pins - Ball Lock - Keyring Style - 300 Grade Stainless Steel - Dual Ball
Pins - Ball Lock - Keyring Style - 300 Grade Stainless Steel - Dual Ball

Also see combined categories:
All Ball Lock Pins
All Keyring Style Ball Lock Pins

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.

Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.

Related Information:

There is also a good range of Pins - Ball Lock - Keyring Style - 300 Grade Stainless Steel - Dual Ball on the Small Parts and Bearings website.


Pins - Ball Lock - Keyring Style - 300 Grade Stainless Steel - Single Ball
Pins - Ball Lock - Keyring Style - 300 Grade Stainless Steel - Single Ball

Also see combined categories:
All Ball Lock Pins
All Keyring Style Ball Lock Pins

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.

Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.

Related Information:

There is also a good range of Pins - Ball Lock - Keyring Style - 300 Grade Stainless Steel - Single Ball on the Small Parts and Bearings website.


Pins - Ball Lock - Keyring Style - 316 Stainless Steel
Pins - Ball Lock - Keyring Style - 316 Stainless Steel

Also see combined categories:
All Ball Lock Pins
All Keyring Style Ball Lock Pins

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.

Positive lock detent pins. 316 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls. This category may be available in the new MBA online store at Pins - Ball Lock - Keyring Style - 316 Stainless Steel.

Related Information:

There is also a good range of Pins - Ball Lock - Keyring Style - 316 Stainless Steel on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227578 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227578 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.