Nuts Lock Categories
Nuts - Lock - Tinnerman Palnut
Mechanical Copper Locknuts
There is also a good range of Nuts - Lock - Tinnerman Palnut on the Small Parts and Bearings website.
Nuts - Aerotight
Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.
There is also a good range of Nuts - Aerotight on the Small Parts and Bearings website.
Nuts - Quick Release
UNC
Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.
There is also a good range of Nuts - Quick Release on the Small Parts and Bearings website.
Nuts - Hexagonal - Binx - Steel
The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.
There is also a good range of Nuts - Hexagonal - Binx - Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Weld - Steel
Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.
There is also a good range of Nuts - Hexagonal - Weld - Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Aluminium
Nylon Insert for Locking. Not NylocTM brand.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
Related Information:
There is also a good range of Nuts - Hexagonal - Nylon Insert - Aluminium on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Steel
Nylon Insert for Locking. NylocTM and other brands.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon Insert - Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nylon Insert for Locking. NylocTM and other brands.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon Insert - Stainless Steel on the Small Parts and Bearings website.
You may also be interested in
Plungers Indexing
Nuts - Lock - For Indexing Plungers
There is also a good range of Nuts - Lock - For Indexing Plungers on the Small Parts and Bearings website.
Shock Absorbers
Shock Absorbers - Lock Nuts
There is also a good range of Shock Absorbers - Lock Nuts on the Small Parts and Bearings website.
Springs Disc
Washers - Disc Spring - Flange Locking Type
Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock. Also known as belleville washers.
The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.
There is also a good range of Washers - Disc Spring - Flange Locking Type on the Small Parts and Bearings website.
Plungers Indexing
Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut
With thermoplastic knob
There is also a good range of Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut on the Small Parts and Bearings website.
Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut
With thermoplastic knob
There is also a good range of Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut on the Small Parts and Bearings website.
Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut
There is also a good range of Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut on the Small Parts and Bearings website.
Washers Lock
Washers - Lock - Split - Stainless Steel
304 Grade Stainless Steel
Washers designed to be used to help prevent nuts from vibrating loose.
There is also a good range of Washers - Lock - Split - Stainless Steel on the Small Parts and Bearings website.
Washers - Lock - Split - Steel
Plain and zinc plated
Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose.
There is also a good range of Washers - Lock - Split - Steel on the Small Parts and Bearings website.
Washers - Lock - Tabbed - Heavy Duty
Heavy duty WH / TW Series for bearing locknuts.
Carbon spring steel. Use with NH series locknuts. For use with bearing lock nuts.
There is also a good range of Washers - Lock - Tabbed - Heavy Duty on the Small Parts and Bearings website.
Plungers Indexing
Plungers - Indexing - Grip - Stainless - With Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Stainless - With Nut on the Small Parts and Bearings website.
Plungers - Indexing - Grip - Stainless - Without Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Stainless - Without Nut on the Small Parts and Bearings website.
Plungers - Indexing - Grip - Steel - With Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Steel - With Nut on the Small Parts and Bearings website.
Plungers - Indexing - Grip - Steel - Without Nut
Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
There is also a good range of Plungers - Indexing - Grip - Steel - Without Nut on the Small Parts and Bearings website.
Clamps
Clamp Kits - Timing Belt
Used for locking the ends of timing belt lengths used in linear applications
Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.
Related Information:
There is also a good range of Clamp Kits - Timing Belt on the Small Parts and Bearings website.
Latches Quarter Turn
Latches - 1-4 Turn -Tee Handle - Non Locking
Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.
Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.
There is also a good range of Latches - 1-4 Turn -Tee Handle - Non Locking on the Small Parts and Bearings website.
Shaftloc
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.
Related Information:
There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.
Washers Lock
Washers - Lock - Internal Tooth - Spring Steel
These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.
Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose.
There is also a good range of Washers - Lock - Internal Tooth - Spring Steel on the Small Parts and Bearings website.
Washers - Lock - Internal Tooth - Stainless Steel
These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.
Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose.
There is also a good range of Washers - Lock - Internal Tooth - Stainless Steel on the Small Parts and Bearings website.
Plungers Indexing
Plungers - Indexing - Cam Action - With Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - Without Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.
Screws - Panel - Jack - Steel
Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.
Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.
There is also a good range of Screws - Panel - Jack - Steel on the Small Parts and Bearings website.
Washers - Lock - Split - Titanium CP Grade 1
CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Dimensions are nominal and may vary between batches. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. Washers designed to be used to help prevent nuts from vibrating loose.
There is also a good range of Washers - Lock - Split - Titanium CP Grade 1 on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Square - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Round - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Round - Metallic on the Small Parts and Bearings website.
Cross Blocks - Heavy Duty - Two Nuts
Used for connecting two round rods at 90o.
Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.
There is also a good range of Cross Blocks - Heavy Duty - Two Nuts on the Small Parts and Bearings website.
Cross Blocks - Heavy Duty - One Knob One Nut
Used for connecting two round rods at 90o.
Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.
There is also a good range of Cross Blocks - Heavy Duty - One Knob One Nut on the Small Parts and Bearings website.
Ballscrew - 16mm Nuts - Pillow Block
Includes ball nut. Match all components within the 16mm range only.
Antibacklash. Repeatability 0.01mm, accuracy 0.1mm/300mm when used with our 16mm screws. Hardened ground and polished Cf53 steel to HRC62 +/-2. Balls hardened HRC63 +/- 2.
There is also a good range of Ballscrew - 16mm Nuts - Pillow Block on the Small Parts and Bearings website.
Washers - Lock - External Tooth - Spring Steel
Dimensions are nominal and may vary between batches.
There is also a good range of Washers - Lock - External Tooth - Spring Steel on the Small Parts and Bearings website.
Washers - Lock - External Tooth - Stainless Steel
Dimensions are nominal and may vary between batches.
There is also a good range of Washers - Lock - External Tooth - Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
There is also a good range of Plungers - Indexing - Locking - With Knob - 303 stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Locking - With Knob - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Mounting Plate - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.
There is also a good range of Plungers - Indexing - Locking - With Mounting Plate - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Shoulder - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Locking - With Shoulder - Steel on the Small Parts and Bearings website.
Pins - Ball Lock - Ball Handle - Plastic Handle
Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.
Positive lock detent pins. Plastic Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - Ball Handle - Plastic Handle on the Small Parts and Bearings website.
Pins - Ball Lock - Button Handle - Commercial
Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.
Economical. Positive lock detent pins. Aluminium handles. 360 Brass Buttons. Commercial Carbon Steel Shank and balls. Use industrial grade T handled pins when higher double shear strength is required.
Related Information:
There is also a good range of Pins - Ball Lock - Button Handle - Commercial on the Small Parts and Bearings website.
Pins - Ball Lock - Button Handle - Stainless Steel
17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.
Positive lock detent pins. Aluminium handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - Button Handle - Stainless Steel on the Small Parts and Bearings website.
Pins - Ball Lock - Button Handle - Steel
Heat treated 4130 alloy spindle and shank. Handles aluminium.
Positive lock detent pins. Aluminium handles. Carbon Steel Shank and balls.
Related Information:
There is also a good range of Pins - Ball Lock - Button Handle - Steel on the Small Parts and Bearings website.
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.
Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel on the Small Parts and Bearings website.
Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel
17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.
Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel on the Small Parts and Bearings website.
Pins - Ball Lock - Flanged Receptacles
Provide a permanent and proper mating hole for commercial and industrial type quick release ball lock pins.
Designed to be used on materials or in applications where the positive lock detent pin does not have anything to lock against. Pin does not protrude past the bottom of the receptacle so they are ideal for blind hole applications. 303 Stainless Steel. Mounted with screws, rivets or bolts. The quick release ball lock pins are inserted from the flanged end, and the ball extends into the wider opening at the top of the receptacle.
Related Information:
There is also a good range of Pins - Ball Lock - Flanged Receptacles on the Small Parts and Bearings website.
Pins - Ball Lock - High Tension - Industrial
17-4 PH or PH15-7MO stainless steel shank. CRES440C stainless steel spindle. Four balls offer greater pullout strength.
Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - High Tension - Industrial on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125388 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
