Miniature Bearings Australia Pty Ltd

Nuts Lock Categories


Nuts - Lock - Tinnerman Palnut
Nuts - Lock - Tinnerman Palnut

Mechanical Copper Locknuts


There is also a good range of Nuts - Lock - Tinnerman Palnut on the Small Parts and Bearings website.


Nuts - Hexagonal - Locking
Nuts - Hexagonal - Locking

Also see combined categories:
All Lock Nuts

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.


There is also a good range of Nuts - Hexagonal - Locking on the Small Parts and Bearings website.


Nuts - Aerotight
Nuts - Aerotight

Also see combined categories:
All Lock Nuts

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.


There is also a good range of Nuts - Aerotight on the Small Parts and Bearings website.


Nuts - Quick Release
Nuts - Quick Release

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.


There is also a good range of Nuts - Quick Release on the Small Parts and Bearings website.


Nuts - Hexagonal - Binx - Steel
Nuts - Hexagonal - Binx - Steel

Also see combined categories:
All Lock Nuts

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


There is also a good range of Nuts - Hexagonal - Binx - Steel on the Small Parts and Bearings website.


Nuts - Hexagonal - Weld - Steel
Nuts - Hexagonal - Weld - Steel

Also see combined categories:
All Lock Nuts

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.


There is also a good range of Nuts - Hexagonal - Weld - Steel on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:
Aluminium Technical Info

There is also a good range of Nuts - Hexagonal - Nylon Insert - Aluminium on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon Insert - Brass
Nuts - Hexagonal - Nylon Insert - Brass

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


There is also a good range of Nuts - Hexagonal - Nylon Insert - Brass on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon Insert - Steel
Nuts - Hexagonal - Nylon Insert - Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


There is also a good range of Nuts - Hexagonal - Nylon Insert - Steel on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nuts - Hexagonal - Nylon Insert - Stainless Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


There is also a good range of Nuts - Hexagonal - Nylon Insert - Stainless Steel on the Small Parts and Bearings website.


Nuts Lock for Bearings


Nuts - Lock - For Bearings - Face
Nuts - Lock - For Bearings - Face

Also see combined categories:
All Lock Nuts for Bearings


There is also a good range of Nuts - Lock - For Bearings - Face on the Small Parts and Bearings website.


Nuts - Lock - For Bearings - Peripheral
Nuts - Lock - For Bearings - Peripheral

Also see combined categories:
All Lock Nuts for Bearings


There is also a good range of Nuts - Lock - For Bearings - Peripheral on the Small Parts and Bearings website.


You may also be interested in

Plungers Indexing


Nuts - Lock - For Indexing Plungers
Nuts - Lock - For Indexing Plungers


There is also a good range of Nuts - Lock - For Indexing Plungers on the Small Parts and Bearings website.


Shock Absorbers


Shock Absorbers - Lock Nuts
Shock Absorbers - Lock Nuts

Also see combined categories:
All Shock Absorbers


There is also a good range of Shock Absorbers - Lock Nuts on the Small Parts and Bearings website.


Springs Disc


Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock. Also known as belleville washers.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.


There is also a good range of Washers - Disc Spring - Flange Locking Type on the Small Parts and Bearings website.


Plungers Indexing


Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


There is also a good range of Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut on the Small Parts and Bearings website.


Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut
Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


There is also a good range of Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut on the Small Parts and Bearings website.




Plungers - Indexing - Grip - Stainless - With Nut
Plungers - Indexing - Grip - Stainless - With Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


There is also a good range of Plungers - Indexing - Grip - Stainless - With Nut on the Small Parts and Bearings website.


Plungers - Indexing - Grip - Stainless - Without Nut
Plungers - Indexing - Grip - Stainless - Without Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


There is also a good range of Plungers - Indexing - Grip - Stainless - Without Nut on the Small Parts and Bearings website.


Plungers - Indexing - Grip - Steel - With Nut
Plungers - Indexing - Grip - Steel - With Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


There is also a good range of Plungers - Indexing - Grip - Steel - With Nut on the Small Parts and Bearings website.


Plungers - Indexing - Grip - Steel - Without Nut
Plungers - Indexing - Grip - Steel - Without Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


There is also a good range of Plungers - Indexing - Grip - Steel - Without Nut on the Small Parts and Bearings website.


Clamps


Clamp Kits - Timing Belt
Clamp Kits - Timing Belt

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:

There is also a good range of Clamp Kits - Timing Belt on the Small Parts and Bearings website.


Latches Quarter Turn


Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


There is also a good range of Latches - 1-4 Turn -Tee Handle - Non Locking on the Small Parts and Bearings website.


Shaftloc


Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:
Shaftloc-tm- System Explanation

There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.


Plungers Indexing


Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:
Mounting Blocks

There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.


Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:
Mounting Blocks

There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122326 products in 2689 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122326 products in 2689 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.