NUTS HEX CATEGORIES
Nuts - Hexagonal - Brass
UNC - UNF - BA - METRIC.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size.
There is also a good range of Nuts - Hexagonal - Brass on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon on the Small Parts and Bearings website.
Nuts - Hexagonal - Steel
UNC - UNF - BA - METRIC. Plain and Zinc Plated.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Steel on the Small Parts and Bearings website.
Hobby - Nut Packs
Hobby Nut Packs. Includes Dubro Range
There is also a good range of Hobby - Nut Packs on the Small Parts and Bearings website.
Nuts - Hexagonal - Stainless Steel
UNC - UNF - BA - METRIC - BSW - Course - Fine - Extra Fine.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Stainless Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Half - Stainless Steel
UNC - UNF - METRIC
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Half - Stainless Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon - Self Tapping
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon - Self Tapping on the Small Parts and Bearings website.
Nuts - Hexagonal - Titanium - CP Grade 1
Metric Only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
There is also a good range of Nuts - Hexagonal - Titanium - CP Grade 1 on the Small Parts and Bearings website.
Nuts - Hexagonal - Titanium - Ti-Gr5 - Ti-6Al4v
Metric. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. Used in critical aircraft structural components. UNS R56400. If the A and H dimensions are critical for your application please consult us prior to ordering. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
There is also a good range of Nuts - Hexagonal - Titanium - Ti-Gr5 - Ti-6Al4v on the Small Parts and Bearings website.
You may also be interested in
Shock Absorbers
Shock Absorbers - Hydraulic - Hex Jam Nuts
There is also a good range of Shock Absorbers - Hydraulic - Hex Jam Nuts on the Small Parts and Bearings website.
Plungers Indexing
Plungers - Indexing - Cam Action - With Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - Without Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.
Screws Hex Head
Screws - Hex Head - 304 Stainless
Metric - UNF - UNC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Hex Head - 304 Stainless on the Small Parts and Bearings website.
Spacers
Spacers - Hex - Threaded - Aluminium
Threaded Hex Spacers. Also known as coupling nuts.
There is also a good range of Spacers - Hex - Threaded - Aluminium on the Small Parts and Bearings website.
Spacers - Hex - Threaded - Brass
Threaded Hex Spacers. Also known as coupling nuts.
Most items are nickel plated. Refer details recorded against each item.
There is also a good range of Spacers - Hex - Threaded - Brass on the Small Parts and Bearings website.
Spacers - Hex - Threaded - Steel
Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.
There is also a good range of Spacers - Hex - Threaded - Steel on the Small Parts and Bearings website.
Spacers - Hex - Threaded - 316 Stainless Steel
Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.
There is also a good range of Spacers - Hex - Threaded - 316 Stainless Steel on the Small Parts and Bearings website.
Screws Hex Head
Screws - Hex Head - Brass
Brass metal thread machine screws UNC and UNF
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Hex Head - Brass on the Small Parts and Bearings website.
Spacers
Spacers - Hex - Threaded - 303-304 Stainless Steel
Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.
There is also a good range of Spacers - Hex - Threaded - 303-304 Stainless Steel on the Small Parts and Bearings website.
Cable
Attachments - Wire Rope Clips - Stainless Steel
304 Stainless Steel
Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.
There is also a good range of Attachments - Wire Rope Clips - Stainless Steel on the Small Parts and Bearings website.
Attachments - Wire Rope Clips - Carbon Steel
Hot galvanised carbon steel
Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.
There is also a good range of Attachments - Wire Rope Clips - Carbon Steel on the Small Parts and Bearings website.
Clamp Kits - Timing Belt
Used for locking the ends of timing belt lengths used in linear applications
Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.
Related Information:
There is also a good range of Clamp Kits - Timing Belt on the Small Parts and Bearings website.
Latches - 1-4 Turn -Tee Handle - Non Locking
Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.
Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.
There is also a good range of Latches - 1-4 Turn -Tee Handle - Non Locking on the Small Parts and Bearings website.
Screws - Panel - Jack - Steel
Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.
Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.
There is also a good range of Screws - Panel - Jack - Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Binx - Steel
The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.
There is also a good range of Nuts - Hexagonal - Binx - Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Aluminium
Nylon Insert for Locking. Not NylocTM brand.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
Related Information:
There is also a good range of Nuts - Hexagonal - Nylon Insert - Aluminium on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nylon Insert for Locking. NylocTM and other brands.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon Insert - Stainless Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Steel
Nylon Insert for Locking. NylocTM and other brands.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon Insert - Steel on the Small Parts and Bearings website.
Nuts - Hexagonal - Weld - Steel
Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.
There is also a good range of Nuts - Hexagonal - Weld - Steel on the Small Parts and Bearings website.
Nuts - Lock - For Indexing Plungers
There is also a good range of Nuts - Lock - For Indexing Plungers on the Small Parts and Bearings website.
Nuts - Cap - Stainless Steel
Stainless Steel. Lower profile than a dome nut.
There is also a good range of Nuts - Cap - Stainless Steel on the Small Parts and Bearings website.
Nuts - Dome - Nylon
Natural Nylon.
There is also a good range of Nuts - Dome - Nylon on the Small Parts and Bearings website.
Nuts - Dome - Stainless Steel
Stainless Steel.
There is also a good range of Nuts - Dome - Stainless Steel on the Small Parts and Bearings website.
Nuts - Dome - Steel
Mild Steel, chrome and zinc plated
There is also a good range of Nuts - Dome - Steel on the Small Parts and Bearings website.
Nuts - Aerotight
Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.
There is also a good range of Nuts - Aerotight on the Small Parts and Bearings website.
Nuts - Lock - Tinnerman Palnut
Mechanical Copper Locknuts
There is also a good range of Nuts - Lock - Tinnerman Palnut on the Small Parts and Bearings website.
Nuts - Quick Release
UNC
Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.
There is also a good range of Nuts - Quick Release on the Small Parts and Bearings website.
Nuts - Blind
Blind nuts - Tee nuts.
Put steel threads in soft materials like wood without counterboring.
There is also a good range of Nuts - Blind on the Small Parts and Bearings website.
Nuts - Flanged - Serrated - Stainless Steel
Stainless Steel.
There is also a good range of Nuts - Flanged - Serrated - Stainless Steel on the Small Parts and Bearings website.
Nuts - Square - Machine Screw
For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards
There is also a good range of Nuts - Square - Machine Screw on the Small Parts and Bearings website.
Nuts - Thumb - Basic
Related Information:
There is also a good range of Nuts - Thumb - Basic on the Small Parts and Bearings website.
Nuts - Thumb - Collared - Brass
Related Information:
There is also a good range of Nuts - Thumb - Collared - Brass on the Small Parts and Bearings website.
Nuts - Wing - Brass
Brass Wing Nuts - A Pattern B18.17
Related Information:
There is also a good range of Nuts - Wing - Brass on the Small Parts and Bearings website.
Nuts - Wing - Malleable Iron - Style B
Malleable iron with a tumbled finish.
There is also a good range of Nuts - Wing - Malleable Iron - Style B on the Small Parts and Bearings website.
Nuts - Wing - Malleable Iron - Style C
Malleable iron with a tumbled finish.
There is also a good range of Nuts - Wing - Malleable Iron - Style C on the Small Parts and Bearings website.
Nuts - Wing - Malleable Iron - Style E
Malleable iron with a tumbled finish.
There is also a good range of Nuts - Wing - Malleable Iron - Style E on the Small Parts and Bearings website.
Nuts - Wing - Nylon
There is also a good range of Nuts - Wing - Nylon on the Small Parts and Bearings website.
Nuts - Wing - Stainless Steel
304 and 316 Stainless Wing Nuts - A Pattern B18.17
Related Information:
There is also a good range of Nuts - Wing - Stainless Steel on the Small Parts and Bearings website.
Nuts - Wing - Steel
Zinc Plated Wing Nuts - A Pattern B18.17
Related Information:
There is also a good range of Nuts - Wing - Steel on the Small Parts and Bearings website.
Screws - Hex Head - Plain - Nylon
UNC - UNF
Related Information:
There is also a good range of Screws - Hex Head - Plain - Nylon on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125355 products in 2309 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
