Mounts Machinery Categories
Mounts - Machinery - Industrial - Heavy Duty
High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.
For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.
There is also a good range of Mounts - Machinery - Industrial - Heavy Duty on the Small Parts and Bearings website.
Mounts - Machinery - Industrial - Medium Duty
High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.
For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.
There is also a good range of Mounts - Machinery - Industrial - Medium Duty on the Small Parts and Bearings website.
Mounts - Machinery - Industrial - Pneumatic Elastomeric
Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.
Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.
There is also a good range of Mounts - Machinery - Industrial - Pneumatic Elastomeric on the Small Parts and Bearings website.
Mounts - Compression
Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.
Made with durable oil and ozone resistant neoprene. No special tools required for installation.
There is also a good range of Mounts - Compression on the Small Parts and Bearings website.
Mounts - Neoprene Pads - Ribbed Pattern
Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.
Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.
There is also a good range of Mounts - Neoprene Pads - Ribbed Pattern on the Small Parts and Bearings website.
Mounts - Neoprene Pads - Waffle Pattern
Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.
Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Oil resistant neoprene rubber.
There is also a good range of Mounts - Neoprene Pads - Waffle Pattern on the Small Parts and Bearings website.
Feet - Mounting - Bonded Neoprene - No Stud
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
There is also a good range of Feet - Mounting - Bonded Neoprene - No Stud on the Small Parts and Bearings website.
Feet - Mounting - Bonded Neoprene - With Stud
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
There is also a good range of Feet - Mounting - Bonded Neoprene - With Stud on the Small Parts and Bearings website.
You may also be interested in
Isolators
Mounts - Vibration - Isolation Pads - General Purpose
For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.
Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.
There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.
Mounts Leveling
Mounts - Leveling - Machine - Cushioned
Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.
High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.
There is also a good range of Mounts - Leveling - Machine - Cushioned on the Small Parts and Bearings website.
ISO-PADS
ISO-PAD - Sheets
For shimming and mounting machinery bases to isolate vibration.
Orange in colour. Patterned and unpatterned types. Tough vinyl chloride elastomeric resin bonded to both sides of a core of monofilament fibreglass. Co-efficient of friction 0.8. Temp range -35 oC to 110 Deg C.
There is also a good range of ISO-PAD - Sheets on the Small Parts and Bearings website.
Mounts Wedge
Mounts - Wedge - Heavy Duty
For installation and precise leveling of heavy industrial machinery.
Three machined wedges are mounted and held together by a horizontal adjusting bolt. A lock screw ensures the mount in the leveled position. Keys in the sliding surface of the wedges ensure rigidity within the mount construction. A special opening allows for bolting of the machine to the floor. Maximum leveling is 6.35mm.
There is also a good range of Mounts - Wedge - Heavy Duty on the Small Parts and Bearings website.
Mounts Leveling
Mounts - Leveling - Light Duty - Nylon Base
Light duty perfect for furniture and small machinery leveling. Adjusters.
Sturdy nylon plastic base. Zinc plated steel stem.
There is also a good range of Mounts - Leveling - Light Duty - Nylon Base on the Small Parts and Bearings website.
Mounts - Leveling - Anti-Vibration - Studded Type
Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery. Adjusters.
15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish.
There is also a good range of Mounts - Leveling - Anti-Vibration - Studded Type on the Small Parts and Bearings website.
Mounts - Leveling - Steel - Industrial - With Elastomer Pad
These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
Clear zinc plated steel. Elastomer pad for non skid applications.
There is also a good range of Mounts - Leveling - Steel - Industrial - With Elastomer Pad on the Small Parts and Bearings website.
Mounts - Leveling - Steel - Industrial - With Nylon Pad
These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
Clear zinc plated steel. Nylon pad for glide applications.
There is also a good range of Mounts - Leveling - Steel - Industrial - With Nylon Pad on the Small Parts and Bearings website.
Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad
These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
303 Stainless Steel. Nylon pad for glide applications.
There is also a good range of Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad on the Small Parts and Bearings website.
Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad
These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
303 Stainless Steel. Elastomer pad for non skid applications.
There is also a good range of Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad on the Small Parts and Bearings website.
Spacers - Machinery Bushings
Used as spacers between pulleys, gears etc
Low carbon mild steel.
There is also a good range of Spacers - Machinery Bushings on the Small Parts and Bearings website.
Books - Engineering
Machinery handbook contains standards, materials and other general engineering information.
Engineers Black Book, Fasteners Black Book, Machinery Handbook, Shop Reference.
There is also a good range of Books - Engineering on the Small Parts and Bearings website.
Catalogues
Hardcopy, CD and PDF catalogues. Including the popular Machinery Handbook.
Information to assist in the selection of our products.
Related Information:
There is also a good range of Catalogues on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Flanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Flanged on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Unflanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Unflanged on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Graphite Plug - Flanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Graphite Plug - Flanged on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Graphite Plug - Unflanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Graphite Plug - Unflanged on the Small Parts and Bearings website.
Shims - Slotted - Imperial Sizes
Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.
There is also a good range of Shims - Slotted - Imperial Sizes on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - With Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - Without Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.
Shims - Rubber
Handy non marring soft spacer shims in a wedge shape
Level and stabilise appliances, desks, tables, filing cabinets, machinery. Stackable. Vibration cushioning. Ribs ensure that wedges grab tight and stay in place. Black ridid wedges can support up to 2000 lbs. White flexible wedges can be trimmed with a utility knife.
There is also a good range of Shims - Rubber on the Small Parts and Bearings website.
Bearings - Ball - Textile Industry
Special Design Stainless and Chrome Steel Bearings for the Textile Industry.
Bearings in this category often have special features. Designed for use in textile industry machinery.
Related Information:
There is also a good range of Bearings - Ball - Textile Industry on the Small Parts and Bearings website.
Mounts - Buffer - Female
Vibration dampening
Related Information:
There is also a good range of Mounts - Buffer - Female on the Small Parts and Bearings website.
Mounts - Buffer - Male
Vibration dampening
Related Information:
There is also a good range of Mounts - Buffer - Male on the Small Parts and Bearings website.
Mounts - Buffer - Male - Conical
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
There is also a good range of Mounts - Buffer - Male - Conical on the Small Parts and Bearings website.
Mounts - Buffer - Special Purpose
Vibration dampening
Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).
There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.
Mounts - Universal - For Acme Thread and Ballscrews
Use grade 8 hex socket head cap screws for mounting.
There is also a good range of Mounts - Universal - For Acme Thread and Ballscrews on the Small Parts and Bearings website.
Mounts - Vibro-Insulator Strips
Vibration dampening
There is also a good range of Mounts - Vibro-Insulator Strips on the Small Parts and Bearings website.
Mounts - Vibration - Isolation - Compression - Stainless Steel
Compression shear mounts for harsh environments.
Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.
There is also a good range of Mounts - Vibration - Isolation - Compression - Stainless Steel on the Small Parts and Bearings website.
Mounts - Vibration - Isolation - Cup Style 2
Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.
High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.
There is also a good range of Mounts - Vibration - Isolation - Cup Style 2 on the Small Parts and Bearings website.
Mounts - Vibration - Isolation Pads - Compression Shear
Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.
Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.
There is also a good range of Mounts - Vibration - Isolation Pads - Compression Shear on the Small Parts and Bearings website.
Mounts - Base - Neoprene - Style 2
There is also a good range of Mounts - Base - Neoprene - Style 2 on the Small Parts and Bearings website.
Mounts - Bonded
There is also a good range of Mounts - Bonded on the Small Parts and Bearings website.
Mounts - Bonded - Two Piece
Steel insert overcoated with rubber joins the two pieces.
There is also a good range of Mounts - Bonded - Two Piece on the Small Parts and Bearings website.
Mounts - Centre Bolt - Solo Unitised
Vibration dampening. Also known as T Bushes or Bonded Mounts.
Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.
There is also a good range of Mounts - Centre Bolt - Solo Unitised on the Small Parts and Bearings website.
Mounts - Cone - Delrin
There is also a good range of Mounts - Cone - Delrin on the Small Parts and Bearings website.
Mounts - Cupmounts - Industrial
Protext against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.
Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.
There is also a good range of Mounts - Cupmounts - Industrial on the Small Parts and Bearings website.
Mounts - Bobbin - Female
Vibration dampening
Related Information:
There is also a good range of Mounts - Bobbin - Female on the Small Parts and Bearings website.
Mounts - Bobbin - Male
Vibration dampening
Related Information:
There is also a good range of Mounts - Bobbin - Male on the Small Parts and Bearings website.
Mounts - Bobbin - Male to Female
Vibration dampening
Related Information:
There is also a good range of Mounts - Bobbin - Male to Female on the Small Parts and Bearings website.
Mounts - Bobbin - Square Base
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Fastener may be steel, brass or zinc plated. Natural Rubber isolator.
There is also a good range of Mounts - Bobbin - Square Base on the Small Parts and Bearings website.
Mounts - Anti-Vibration - 303 Stainless Steel
Corrosion resistant designed with high grade nitrile rubber and stainless steel.
Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.
There is also a good range of Mounts - Anti-Vibration - 303 Stainless Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 123540 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
