Mounts Machinery Categories

There is also a good range of Mounts - Machinery - Industrial - Heavy Duty on the Small Parts and Bearings website.

Mounts - Machinery - Industrial - Medium Duty

Also see combined categories:
All Industrial Machine Mounts

High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.

Related Information:

There is also a good range of Mounts - Machinery - Industrial - Medium Duty on the Small Parts and Bearings website.

Mounts - Machinery - Industrial - Pneumatic Elastomeric

Also see combined categories:
All Industrial Machine Mounts

Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.

Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.

Related Information:

There is also a good range of Mounts - Machinery - Industrial - Pneumatic Elastomeric on the Small Parts and Bearings website.

Mounts - Compression

Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.

Made with durable oil and ozone resistant neoprene. No special tools required for installation.

Related Information:

There is also a good range of Mounts - Compression on the Small Parts and Bearings website.

Mounts - Neoprene Pads - Ribbed Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90^o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.

Related Information:

There is also a good range of Mounts - Neoprene Pads - Ribbed Pattern on the Small Parts and Bearings website.

Mounts - Neoprene Pads - Waffle Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Oil resistant neoprene rubber.

Related Information:

There is also a good range of Mounts - Neoprene Pads - Waffle Pattern on the Small Parts and Bearings website.

Feet - Mounting - Bonded Neoprene - No Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.

There is also a good range of Feet - Mounting - Bonded Neoprene - No Stud on the Small Parts and Bearings website.

Feet - Mounting - Bonded Neoprene - With Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.

There is also a good range of Feet - Mounting - Bonded Neoprene - With Stud on the Small Parts and Bearings website.

You may also be interested in

Isolators

Mounts - Vibration - Isolation Pads - General Purpose

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.

Related Information:

There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.

Mounts Wedge

Mounts - Wedge - Heavy Duty

Also see combined categories:
All Wedge Mounts

For installation and precise leveling of heavy industrial machinery.

Three machined wedges are mounted and held together by a horizontal adjusting bolt. A lock screw ensures the mount in the leveled position. Keys in the sliding surface of the wedges ensure rigidity within the mount construction. A special opening allows for bolting of the machine to the floor. Maximum leveling is 6.35mm.

Related Information:

There is also a good range of Mounts - Wedge - Heavy Duty on the Small Parts and Bearings website.

Mounts Leveling

Mounts - Leveling - Studded - Machine - Cushioned

Levelling adjusters. Reduces noise and vibration on heavy machinery, compressors and presses.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.

There is also a good range of Mounts - Leveling - Studded - Machine - Cushioned on the Small Parts and Bearings website.

Mounts - Leveling - Studded - Anti-Vibration

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery.

15^o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 ^oC. Steel parts are zinc plated with black chromate finish.

There is also a good range of Mounts - Leveling - Studded - Anti-Vibration on the Small Parts and Bearings website.

Mounts - Leveling - Studded - Industrial - Nylon Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

Clear zinc plated steel. Nylon pad for glide applications.

There is also a good range of Mounts - Leveling - Studded - Industrial - Nylon Padded on the Small Parts and Bearings website.

Mounts - Leveling - Studded -Industrial - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

Clear zinc plated steel. Elastomer pad for non skid applications.

There is also a good range of Mounts - Leveling - Studded -Industrial - Rubber Padded on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless - Industrial - Nylon Padded

Also see combined categories:
All Male Stud Levelers

303 Stainless Steel. Nylon pad for glide applications.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless - Industrial - Nylon Padded on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless - Industrial - Rubber Padded

Also see combined categories:
All Male Stud Levelers

303 Stainless Steel. Elastomer pad for non skid applications.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless - Industrial - Rubber Padded on the Small Parts and Bearings website.

Spacers - Machinery Bushings

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Used as spacers between pulleys, gears etc

Low carbon mild steel.

There is also a good range of Spacers - Machinery Bushings on the Small Parts and Bearings website.

Catalogues

Hardcopy, CD and PDF catalogues. Including the popular Machinery Handbook.

Information to assist in the selection of our products.

Related Information:

Free PDF Quick Guides

There is also a good range of Catalogues on the Small Parts and Bearings website.

Bushes - Aluminium Bronze - Flanged

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

There is also a good range of Bushes - Aluminium Bronze - Flanged on the Small Parts and Bearings website.

Bushes - Aluminium Bronze - Unflanged

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

There is also a good range of Bushes - Aluminium Bronze - Unflanged on the Small Parts and Bearings website.

Bushes - Aluminium Bronze - Graphite Plug - Flanged

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

There is also a good range of Bushes - Aluminium Bronze - Graphite Plug - Flanged on the Small Parts and Bearings website.

Bushes - Aluminium Bronze - Graphite Plug - Unflanged

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

There is also a good range of Bushes - Aluminium Bronze - Graphite Plug - Unflanged on the Small Parts and Bearings website.

Shims - Slotted - Imperial Sizes

Also see combined categories:
All Slotted Shim

Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.

There is also a good range of Shims - Slotted - Imperial Sizes on the Small Parts and Bearings website.

Plungers - Indexing - Cam Action - With Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:

Mounting Blocks

There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.

Plungers - Indexing - Cam Action - Without Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Related Information:

Mounting Blocks

There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.

Shims - Rubber

Handy non marring soft spacer shims in a wedge shape

Level and stabilise appliances, desks, tables, filing cabinets, machinery. Stackable. Vibration cushioning. Ribs ensure that wedges grab tight and stay in place. Black ridid wedges can support up to 2000 lbs. White flexible wedges can be trimmed with a utility knife.

There is also a good range of Shims - Rubber on the Small Parts and Bearings website.

Mounts - Buffer - Female

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Buffer - Female on the Small Parts and Bearings website.

Mounts - Buffer - Male

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Buffer - Male on the Small Parts and Bearings website.

Mounts - Buffer - Male - Conical

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:

There is also a good range of Mounts - Buffer - Male - Conical on the Small Parts and Bearings website.

Mounts - Buffer - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).

Related Information:

There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.

Mounts - Universal - For Acme Thread and Ballscrews

Use grade 8 hex socket head cap screws for mounting.

Related Information:

There is also a good range of Mounts - Universal - For Acme Thread and Ballscrews on the Small Parts and Bearings website.

Mounts - Vibro-Insulator Strips

Vibration dampening

Related Information:

There is also a good range of Mounts - Vibro-Insulator Strips on the Small Parts and Bearings website.

Mounts - Vibration Isolating - Tee Bushes

Vibration isolation for mobile and static applications involving plate clamping

Reduces structure borne noise and absorbs shock forces. Low profile height.

Related Information:

There is also a good range of Mounts - Vibration Isolating - Tee Bushes on the Small Parts and Bearings website.

Mounts - Vibration - Isolation - Compression - Stainless Steel

Compression shear mounts for harsh environments.

Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.

Related Information:

There is also a good range of Mounts - Vibration - Isolation - Compression - Stainless Steel on the Small Parts and Bearings website.

Mounts - Vibration - Isolation - Cup Style 2

Also see combined categories:
All Cup Mounts

Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.

High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.

Related Information:

There is also a good range of Mounts - Vibration - Isolation - Cup Style 2 on the Small Parts and Bearings website.

Mounts - Vibration - Isolation Pads - Compression Shear

Also see combined categories:
All Isolation Pad Mounts

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.

Related Information:

There is also a good range of Mounts - Vibration - Isolation Pads - Compression Shear on the Small Parts and Bearings website.

Mounts - Base - Neoprene - Style 2

Also see combined categories:
All Neoprene Base Mounts

Related Information:

There is also a good range of Mounts - Base - Neoprene - Style 2 on the Small Parts and Bearings website.

Mounts - Bonded

Also see combined categories:
All Bonded Mounts

Related Information:

There is also a good range of Mounts - Bonded on the Small Parts and Bearings website.

Mounts - Bonded - Two Piece

Also see combined categories:
All Bonded Mounts

Steel insert overcoated with rubber joins the two pieces.

Related Information:

There is also a good range of Mounts - Bonded - Two Piece on the Small Parts and Bearings website.

Mounts - Centre Bolt - Solo Unitised

Also see combined categories:
All Centrebolt Mounts

Vibration dampening. Also known as T Bushes or Bonded Mounts.

Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.

Related Information:

There is also a good range of Mounts - Centre Bolt - Solo Unitised on the Small Parts and Bearings website.

Mounts - Cone - Delrin

Related Information:

There is also a good range of Mounts - Cone - Delrin on the Small Parts and Bearings website.

Mounts - Cupmounts - Industrial

Also see combined categories:
All Cup Mounts

Protect against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.

Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.

Related Information:

There is also a good range of Mounts - Cupmounts - Industrial on the Small Parts and Bearings website.

Mounts - Bobbin - Female

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Bobbin - Female on the Small Parts and Bearings website.

Mounts - Bobbin - Male

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Bobbin - Male on the Small Parts and Bearings website.

Mounts - Bobbin - Male - Square Base

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.

Related Information:

There is also a good range of Mounts - Bobbin - Male - Square Base on the Small Parts and Bearings website.

Mounts - Bobbin - Male to Female

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Bobbin - Male to Female on the Small Parts and Bearings website.

Mounts - Anti-Vibration - 303 Stainless Steel

Corrosion resistant designed with high grade nitrile rubber and stainless steel.

Swivel movement plus or minus 7^o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Related Information:

There is also a good range of Mounts - Anti-Vibration - 303 Stainless Steel on the Small Parts and Bearings website.

Mounts - Anti-Vibration - Zinc Plated Steel

Designed with high grade nitrile rubber and zinc plated steel.

Swivel movement plus or minus 7^o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Related Information: