Miniature Bearings Australia Pty Ltd

Motors Dc Categories


Motors - DC 12.0X30.0 mm
Motors - DC 12.0X30.0 mm

Also see combined categories:
All DC Motors

6.0V - 22800 RPM


Related Information:

There is also a good range of Motors - DC 12.0X30.0 mm on the Small Parts and Bearings website.


Motors - DC 16.6X32.0 mm
Motors - DC 16.6X32.0 mm

Also see combined categories:
All DC Motors

M-500T Series 1.5 to 9 VDC - 1430 to 2230 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 16.6X32.0 mm on the Small Parts and Bearings website.


Motors - DC 18.9X18.0X9.5 mm
Motors - DC 18.9X18.0X9.5 mm

Also see combined categories:
All DC Motors

M-020 Series - 1 to 3 VDC - 3700 to 11000 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft. Weight Approx 9.5 grams.

Related Information:

There is also a good range of Motors - DC 18.9X18.0X9.5 mm on the Small Parts and Bearings website.


Motors - DC 20.0X25.0 mm
Motors - DC 20.0X25.0 mm

Also see combined categories:
All DC Motors

1.5 to 4.5 VDC - 12,000 RPM unloaded at 3 volts


Related Information:

There is also a good range of Motors - DC 20.0X25.0 mm on the Small Parts and Bearings website.


Motors - DC 22.4X38.0 mm
Motors - DC 22.4X38.0 mm

Also see combined categories:
All DC Motors


Related Information:

There is also a good range of Motors - DC 22.4X38.0 mm on the Small Parts and Bearings website.


Motors - DC 23.8X30.6 mm
Motors - DC 23.8X30.6 mm

Also see combined categories:
All DC Motors

12 VDC - 12,300 RPM unloaded at 4.5 volts


Related Information:

There is also a good range of Motors - DC 23.8X30.6 mm on the Small Parts and Bearings website.


Motors - DC 24.3X12.35 mm
Motors - DC 24.3X12.35 mm

Also see combined categories:
All DC Motors

6.0 VDC - 4,900 RPM unloaded at 4.5 volts


Related Information:

There is also a good range of Motors - DC 24.3X12.35 mm on the Small Parts and Bearings website.


Motors - DC 25.0x20.1X15.1 mm
Motors - DC 25.0x20.1X15.1 mm

Also see combined categories:
All DC Motors

M-13 Series - 1.5 to 24 VDC - 4500 to 13760 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 25.0x20.1X15.1 mm on the Small Parts and Bearings website.


Motors - DC 25.0X21.0 mm
Motors - DC 25.0X21.0 mm

Also see combined categories:
All DC Motors

M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 25.0X21.0 mm on the Small Parts and Bearings website.


Motors - DC 26.9X23.8 mm
Motors - DC 26.9X23.8 mm

Also see combined categories:
All DC Motors

M-26 Series 1.5 to 24 VDC - 2500 to 15100 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 26.9X23.8 mm on the Small Parts and Bearings website.


Motors - DC 26.9X24.2X18.3 mm
Motors - DC 26.9X24.2X18.3 mm

Also see combined categories:
All DC Motors

MF-26 Series - 1.5 to 24 VDC - 3600 to 15900 RPM. Standard 130 Size Hobby Motor.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 26.9X24.2X18.3 mm on the Small Parts and Bearings website.


Motors - DC 30.5X24.2 mm
Motors - DC 30.5X24.2 mm

Also see combined categories:
All DC Motors

M-28 Series 1.5 to 24 VDC - 2830 to 14250 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 30.5X24.2 mm on the Small Parts and Bearings website.


Motors - DC 30.5X24.2X18.3 mm
Motors - DC 30.5X24.2X18.3 mm

Also see combined categories:
All DC Motors

MF-28 Series - 1.5 to 24 VDC - 4470 to 13430 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 30.5X24.2X18.3 mm on the Small Parts and Bearings website.


Motors - DC 36.0X71.0 mm
Motors - DC 36.0X71.0 mm

Also see combined categories:
All DC Motors

High power, high speed 11,800 RPM unloaded at 12 volts


Related Information:

There is also a good range of Motors - DC 36.0X71.0 mm on the Small Parts and Bearings website.


Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:

There is also a good range of Motors - DC 6mm Diameter on the Small Parts and Bearings website.


Motors - DC 8.0X10.0 mm
Motors - DC 8.0X10.0 mm

Also see combined categories:
All DC Motors

3.5V - 20500 RPM


Related Information:

There is also a good range of Motors - DC 8.0X10.0 mm on the Small Parts and Bearings website.


You may also be interested in

Gearmotors DC


Gearmotors - DC - Size 25 Low Cost
Gearmotors - DC - Size  25 Low Cost


25mm Gearhead Body Diameter. 24.4mm Motor Body Diameter. Low cost. Reversible

D Shaped 4x8mm Output Shaft.

There is also a good range of Gearmotors - DC - Size 25 Low Cost on the Small Parts and Bearings website.


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.

There is also a good range of Spring Motor Assemblies - Open - RINO on the Small Parts and Bearings website.


Spring Motors - RINO
Spring Motors - RINO

Also see combined categories:
All Spring Motors

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

There is also a good range of Spring Motors - RINO on the Small Parts and Bearings website.


Spring Motors - SDP
Spring Motors - SDP

Also see combined categories:
All Spring Motors

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

There is also a good range of Spring Motors - SDP on the Small Parts and Bearings website.


Spa Jet Motor Multiple Parts
Spa Jet Motor Multiple Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Spa Jet Motor Multiple Parts on the Small Parts and Bearings website.


Micromat-Athlet Type H240B Motor Muss Parts
Micromat-Athlet Type H240B Motor Muss Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromat-Athlet Type H240B Motor Muss Parts on the Small Parts and Bearings website.


Park 480 E-Flite Parts
Park 480 E-Flite Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Park 480 E-Flite Parts on the Small Parts and Bearings website.


Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

There is also a good range of Gearheads - Inline - Planetary - Size 17 - Precision on the Small Parts and Bearings website.


Couplings - Helical - Economy
Couplings - Helical - Economy

Also see combined categories:
All Helical and Slit Couplings

Low cost aluminium couplings primarily used for 3D printer stepper motors

Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm.

Related Information:

There is also a good range of Couplings - Helical - Economy on the Small Parts and Bearings website.


Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure


Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:

There is also a good range of Bearings - Hydrodynamic Pressure on the Small Parts and Bearings website.


Gearmotors - DC - Low Voltage
Gearmotors - DC - Low Voltage

Also see combined categories:
All Low Voltage DC Gearmotors

Reversible - Low Voltage - Self Starting.

Reversible. Low Voltage. Self Starting. Housing : Plastic / Shaft : Steel.

There is also a good range of Gearmotors - DC - Low Voltage on the Small Parts and Bearings website.


Gearmotors - DC - Size 12
Gearmotors - DC - Size  12

Also see combined categories:
All DC Gearmotors

12mm Gearhead Body Diameter.


There is also a good range of Gearmotors - DC - Size 12 on the Small Parts and Bearings website.


Ballscrew - Thomson Saginaw
Ballscrew - Thomson Saginaw

Also see combined categories:
All Ball Screws

Offer 90% efficiency converting rotary to linear motion with low coefficient of friction. Match all components within the Thomson Saginaw range only.

When replacing screws, hydraulics or pneumatics, they allow the use of smaller, less expensive drive motors and reduce the need for auxiliary equipment. Offer dependable accuracy and repeatability, Made off high quality alloy steel, hardened to Rockwell 56-60C.

There is also a good range of Ballscrew - Thomson Saginaw on the Small Parts and Bearings website.


Posi Drive Stage - Ball Slide
Posi Drive Stage - Ball Slide

Also see combined categories:
All Posi-Drive Stages

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

There is also a good range of Posi Drive Stage - Ball Slide on the Small Parts and Bearings website.


Posi Drive Stage - Crossed Roller
Posi Drive Stage - Crossed Roller

Also see combined categories:
All Posi-Drive Stages

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

There is also a good range of Posi Drive Stage - Crossed Roller on the Small Parts and Bearings website.


Airmotor 13000 RPM W.H. Parts
Airmotor 13000 RPM W.H. Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Airmotor 13000 RPM W.H. Parts on the Small Parts and Bearings website.


Micromotor Aquilon 830 - 850 Bien Air Parts
Micromotor Aquilon 830 - 850 Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor Aquilon 830 - 850 Bien Air Parts on the Small Parts and Bearings website.


Micromotor Isolite 100 and 300 Bien Air Parts
Micromotor Isolite 100 and 300 Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor Isolite 100 and 300 Bien Air Parts on the Small Parts and Bearings website.


Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts
Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts on the Small Parts and Bearings website.


Micromotor Morita Parts
Micromotor Morita Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor Morita Parts on the Small Parts and Bearings website.


Plungers - Ball - Threaded - With Limit Switch
Plungers - Ball - Threaded - With Limit Switch

Also see combined categories:
All Threaded Ball Plungers

Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.

Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.

There is also a good range of Plungers - Ball - Threaded - With Limit Switch on the Small Parts and Bearings website.


Catalogues
Catalogues


Hardcopy, CD and PDF catalogues. Including the popular Machinery Handbook.

Information to assist in the selection of our products.

Related Information:

There is also a good range of Catalogues on the Small Parts and Bearings website.


Clutches - Magnetic Particle 24VDC
Clutches - Magnetic Particle 24VDC

Also see combined categories:
All Magnetic Clutches

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Related Information:

There is also a good range of Clutches - Magnetic Particle 24VDC on the Small Parts and Bearings website.


O-Rings - EPDM Rubber
O-Rings - EPDM Rubber

Also see combined categories:
All O-Rings

Suitable for heated water and steam.

Temperature Range: -55oC to +150oC. Chemically resistant to Hydraulic Fluids. Resistant to alcohols, glycol engine coolants and SKY-DROL (phosphate ester hydraulic fluid).

Related Information:

There is also a good range of O-Rings - EPDM Rubber on the Small Parts and Bearings website.


Books - Engineering
Books - Engineering

Also see combined categories:
All Books

Machinery handbook contains standards, materials and other general engineering information.

Engineers Black Book, Fasteners Black Book, Machinery Handbook, Shop Reference.

There is also a good range of Books - Engineering on the Small Parts and Bearings website.


Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.

There is also a good range of Rings - Hoist - Safety Engineered on the Small Parts and Bearings website.


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122208 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122208 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.