Lubricants General Purpose Categories
Lubricants - General
Various brands and types. Includes Inox, Lanox, Anti-Seize, Cutting Fluid, Chain Lube, Moly Lube, Food Grade Grease, PTFE Lubes, Silicone and more
Some items in this category are marked as only available for collection. Includes high temperature and food grade lubes. Battery Conditioner - Oils - Moisture Inhibitor - WD - Valve and Oring Lubricant.
There is also a good range of Lubricants - General on the Small Parts and Bearings website.
You may also be interested in
Castors Plate
Castors - Plate - General Purpose - Fixed
There is also a good range of Castors - Plate - General Purpose - Fixed on the Small Parts and Bearings website.
Castors - Plate - General Purpose - Swivel
There is also a good range of Castors - Plate - General Purpose - Swivel on the Small Parts and Bearings website.
Castors - Plate - General Purpose - Swivel with Brake
There is also a good range of Castors - Plate - General Purpose - Swivel with Brake on the Small Parts and Bearings website.
Castors Stud
Castors - Stud - Threaded - General Purpose - Swivel
There is also a good range of Castors - Stud - Threaded - General Purpose - Swivel on the Small Parts and Bearings website.
Shafting General Purpose
Rod - Drill - General
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.
Related Information:
There is also a good range of Rod - Drill - General on the Small Parts and Bearings website.
Castors Stud
Castors - Stud - Friction Ring - General Purpose - Swivel
There is also a good range of Castors - Stud - Friction Ring - General Purpose - Swivel on the Small Parts and Bearings website.
Shafting General Purpose
Rod - Drill Blanks
Made of hardened high speed steel.
Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.
There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.
Isolators
Mounts - Vibration - Isolation Pads - General Purpose
For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.
Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.
There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.
Magnets Alnico
Magnets - Alnico - Horseshoe
General purpose horseshoe magnet
There is also a good range of Magnets - Alnico - Horseshoe on the Small Parts and Bearings website.
Shafting General Purpose
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Shafting - Unground - Silver Steel
Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.
See also drill rod. Drill Rod.
Related Information:
There is also a good range of Shafting - Unground - Silver Steel on the Small Parts and Bearings website.
Hooks
Slings - Wire Rope - Permaloc
For general purpose lifting in environments too rugged for synthetic slings. Tuff-Tag identification on every sling for capacity ratings.
There is also a good range of Slings - Wire Rope - Permaloc on the Small Parts and Bearings website.
O-Rings
O-Rings - Nitrile Rubber
General purpose. Includes o-rings for dental handpiece applications.
Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.
Related Information:
There is also a good range of O-Rings - Nitrile Rubber on the Small Parts and Bearings website.
Shafting General Purpose
Shafts - Flexible - Panel Mount - Cased
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Cased on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Open
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Open on the Small Parts and Bearings website.
Bushes Plastic
Bushes - Plastic - Iglidur G - Flanged
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur G - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur G - Unflanged
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur G - Unflanged on the Small Parts and Bearings website.
Shafting General Purpose
Rod - Drill - A-2 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - A-2 Air Hardening on the Small Parts and Bearings website.
Rod - Drill - O-1 Oil Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - O-1 Oil Hardening on the Small Parts and Bearings website.
Rod - Drill - Oil Hardening - 480 Series
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - Oil Hardening - 480 Series on the Small Parts and Bearings website.
Rod - Drill - S-7 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - S-7 Air Hardening on the Small Parts and Bearings website.
Rod - Drill - W-1 Water Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - W-1 Water Hardening on the Small Parts and Bearings website.
Oil Seals - Nitrile Rubber
DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.
Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.
There is also a good range of Oil Seals - Nitrile Rubber on the Small Parts and Bearings website.
Tool Steel - 496 Oil Hardening - Flat Stock
General purpose tool steel with good wear resistance, durability and machinability
Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).
There is also a good range of Tool Steel - 496 Oil Hardening - Flat Stock on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.
There is also a good range of Bearings - Linear - Sliding - Ceramic Coated on the Small Parts and Bearings website.
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.
There is also a good range of Housings - Linear - Pillow Block - Closed - Ceramic Coated on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.
General Derailer Sprocket Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of General Derailer Sprocket Parts on the Small Parts and Bearings website.
Tools - General
Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits
X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.
There is also a good range of Tools - General on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.
Bearings - Acetal - Special Purpose
Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems
There is also a good range of Bearings - Acetal - Special Purpose on the Small Parts and Bearings website.
Posts - Spring
Related Information:
There is also a good range of Posts - Spring on the Small Parts and Bearings website.
Tools - Sets
General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.
There is also a good range of Tools - Sets on the Small Parts and Bearings website.
Tools - Drills
Hobby drill for very small bits.
There is also a good range of Tools - Drills on the Small Parts and Bearings website.
Tools - Pliers
Pliers, multi tool.
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Pliers on the Small Parts and Bearings website.
Tools - Tweezers
Selection of tweezers for those fiddly jobs.
There is also a good range of Tools - Tweezers on the Small Parts and Bearings website.
Mounts - Buffer - Special Purpose
Vibration dampening
Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).
There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.
Pins - Hitch - External
Similar to R-Clips, but designed for both arms to fit around a shaft groove rather thand having one arm through a bored hole.
Related Information:
There is also a good range of Pins - Hitch - External on the Small Parts and Bearings website.
Pins - Hydraulic Cylinder
Related Information:
There is also a good range of Pins - Hydraulic Cylinder on the Small Parts and Bearings website.
Channel - Brass
For general hobby applications.
There is also a good range of Channel - Brass on the Small Parts and Bearings website.
Tools - Chain Breaker
Used to break roller chain at the pins
There is also a good range of Tools - Chain Breaker on the Small Parts and Bearings website.
Tools - Nut Drivers
Includes socket wrench for 0-80 size screws
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.
Tools - Pin Vises
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.
Bearings - Chamfered Edges
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.
Related Information:
There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.
Bearings - Spherical OD
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems.
Related Information:
There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.
Pins - Clik - Carbon Steel
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.
Related Information:
There is also a good range of Pins - Clik - Carbon Steel on the Small Parts and Bearings website.
Pins - Clik - Mild Steel
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.
Related Information:
There is also a good range of Pins - Clik - Mild Steel on the Small Parts and Bearings website.
Bearings - Ball - Textile Industry
Special Design Stainless and Chrome Steel Bearings for the Textile Industry.
Bearings in this category often have special features. Designed for use in textile industry machinery.
Related Information:
There is also a good range of Bearings - Ball - Textile Industry on the Small Parts and Bearings website.
Strip - Soft Metal Packs
For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
There is also a good range of Strip - Soft Metal Packs on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 123540 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
