Lubricants general purpose categories
Castors Stud
Castors - Stud - Threaded - General Purpose - Swivel
This category may be available in the new MBA online store at Castors - Stud - Threaded - General Purpose - Swivel.
There is also a good range of Castors - Stud - Threaded - General Purpose - Swivel on the Small Parts and Bearings website.
Shafting General Purpose
Rod - Drill Blanks
Made of hardened high speed steel.
Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc. This category may be available in the new MBA online store at Rod - Drill Blanks.
There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.
Shafting - Mild Steel
Great axles for low load and low precision applications like trolleys, carts and wheelbarrows.
Check listed specifications for keyway information. This category may be available in the new MBA online store at Shafting - Mild Steel.
Related Information:
Magnets Alnico
Magnets - Alnico - Horseshoe
General purpose horseshoe magnet
This category may be available in the new MBA online store at Magnets - Alnico - Horseshoe.
There is also a good range of Magnets - Alnico - Horseshoe on the Small Parts and Bearings website.
Shafting General Purpose
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Bushes Plastic
Bushes - Plastic Flanged - Iglidur G
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic Flanged - Iglidur G on the Small Parts and Bearings website.
Bushes - Plastic Unflanged - Iglidur G
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic Unflanged - Iglidur G on the Small Parts and Bearings website.
O-Rings
O-Rings - Nitrile Rubber
General purpose. Includes o-rings for dental handpiece applications.
Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at O-Rings - Nitrile Rubber.
Related Information:
There is also a good range of O-Rings - Nitrile Rubber on the Small Parts and Bearings website.
Shafting General Purpose
Shafts - Flexible - Panel Mount - Cased
This category may be available in the new MBA online store at Shafts - Flexible - Panel Mount - Cased.
There is also a good range of Shafts - Flexible - Panel Mount - Cased on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Open
This category may be available in the new MBA online store at Shafts - Flexible - Panel Mount - Open.
There is also a good range of Shafts - Flexible - Panel Mount - Open on the Small Parts and Bearings website.
Rod - Drill - A-2 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for A-2 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - A-2 Air Hardening.
There is also a good range of Rod - Drill - A-2 Air Hardening on the Small Parts and Bearings website.
Rod - Drill - O-1 Oil Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for O-1 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - O-1 Oil Hardening.
There is also a good range of Rod - Drill - O-1 Oil Hardening on the Small Parts and Bearings website.
Rod - Drill - S-7 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for S-7 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - S-7 Air Hardening.
There is also a good range of Rod - Drill - S-7 Air Hardening on the Small Parts and Bearings website.
Oil Seals
Oil Seals - Nitrile Rubber
DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.
Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at Oil Seals - Nitrile Rubber.
There is also a good range of Oil Seals - Nitrile Rubber on the Small Parts and Bearings website.
Shafting General Purpose
Rod - Drill - Silversteel - W-1 Water Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for W-1 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - Silversteel - W-1 Water Hardening.
There is also a good range of Rod - Drill - Silversteel - W-1 Water Hardening on the Small Parts and Bearings website.
You may also be interested in
Linear Bearings
Bearings - Linear Sliding - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000. This category may be available in the new MBA online store at Bearings - Linear Sliding - Ceramic Coated.
There is also a good range of Bearings - Linear Sliding - Ceramic Coated on the Small Parts and Bearings website.
Linear Bearings with Housing
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants. This category may be available in the new MBA online store at Housings - Linear - Pillow Block - Closed - Ceramic Coated.
There is also a good range of Housings - Linear - Pillow Block - Closed - Ceramic Coated on the Small Parts and Bearings website.
Pushbike Bearings
General Derailer Sprocket Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of General Derailer Sprocket Parts on the Small Parts and Bearings website.
Tools General
Tools - General
Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits
X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more. This category may be available in the new MBA online store at Tools - General.
There is also a good range of Tools - General on the Small Parts and Bearings website.
Bearings Stainless Special Grades
Bearings - Single Row Ball Unflanged - Standard - 316 Stainless - Sealed
Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Single Row Ball Unflanged - Standard - 316 Stainless - Sealed on the Small Parts and Bearings website.
Bearings Plastic
Bearings - Special Purpose - Acetal
Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems
This category may be available in the new MBA online store at Bearings - Special Purpose - Acetal.
Related Information:
There is also a good range of Bearings - Special Purpose - Acetal on the Small Parts and Bearings website.
Hobby Wheels
Wheels - Hobby - General
Includes wheels for robots and general hobby applications
Also see tracks for Robotic applications. This category may be available in the new MBA online store at Wheels - Hobby - General.
Related Information:
Bearings Stainless Special Grades
Bearings - Single Row Ball Unflanged - Standard - 316 Stainless - Shields
Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Single Row Ball Unflanged - Standard - 316 Stainless - Shields on the Small Parts and Bearings website.
Springs General
Posts - Spring
This category may be available in the new MBA online store at Posts - Spring.
Related Information:
There is also a good range of Posts - Spring on the Small Parts and Bearings website.
Tools General
Tools - Wrenches
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Wrenches.
There is also a good range of Tools - Wrenches on the Small Parts and Bearings website.
Mounts Cylindrical
Mounts - Buffer - Special Purpose
Vibration dampening
Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F). This category may be available in the new MBA online store at Mounts - Buffer - Special Purpose.
Related Information:
There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.
Pins General
Pins - Hitch - External
Similar to R-Clips, but designed for both arms to fit around a shaft groove rather thand having one arm through a bored hole.
This category may be available in the new MBA online store at Pins - Hitch - External.
Related Information:
There is also a good range of Pins - Hitch - External on the Small Parts and Bearings website.
Pins - Hydraulic Cylinder
This category may be available in the new MBA online store at Pins - Hydraulic Cylinder.
Related Information:
There is also a good range of Pins - Hydraulic Cylinder on the Small Parts and Bearings website.
Channel
Channel - Aluminium
For general hobby applications.
This category may be available in the new MBA online store at Channel - Aluminium.
There is also a good range of Channel - Aluminium on the Small Parts and Bearings website.
Channel - Brass
For general hobby applications.
This category may be available in the new MBA online store at Channel - Brass.
There is also a good range of Channel - Brass on the Small Parts and Bearings website.
Sets
Tools - Sets - Standard
General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.
This category may be available in the new MBA online store at Tools - Sets - Standard.
There is also a good range of Tools - Sets - Standard on the Small Parts and Bearings website.
Tools General
Tools - Nut Drivers
Includes socket wrench for 0-80 size screws
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Nut Drivers.
There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.
Tools - Pin Vises
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Pin Vises.
There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.
Tools - Punches - Standard
Number punch and letter punch sets
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Punches - Standard.
There is also a good range of Tools - Punches - Standard on the Small Parts and Bearings website.
Pins - Clik - Carbon Steel
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at Pins - Clik - Carbon Steel.
Related Information:
There is also a good range of Pins - Clik - Carbon Steel on the Small Parts and Bearings website.
Pins - Clik - Mild Steel
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at Pins - Clik - Mild Steel.
Related Information:
There is also a good range of Pins - Clik - Mild Steel on the Small Parts and Bearings website.
Bearings - 4 Point Contact
4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited. This category may be available in the new MBA online store at Bearings - 4 Point Contact.
Related Information:
There is also a good range of Bearings - 4 Point Contact on the Small Parts and Bearings website.
Strip - Soft Metal Packs
For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground. This category may be available in the new MBA online store at Strip - Soft Metal Packs.
There is also a good range of Strip - Soft Metal Packs on the Small Parts and Bearings website.
Bearings - Grooved OD - Gothic Groove
Bearings with a Gothic Groove in OD. Round Track Rolling Applications.
Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring. This category may be available in the new MBA online store at Bearings - Grooved OD - Gothic Groove.
Related Information:
There is also a good range of Bearings - Grooved OD - Gothic Groove on the Small Parts and Bearings website.
Bearings - Spherical OD Radial Ball
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems. This category may be available in the new MBA online store at Bearings - Spherical OD Radial Ball.
Related Information:
There is also a good range of Bearings - Spherical OD Radial Ball on the Small Parts and Bearings website.
Pins - Clik - Stainless Steel 316 Grade
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at Pins - Clik - Stainless Steel 316 Grade.
Related Information:
There is also a good range of Pins - Clik - Stainless Steel 316 Grade on the Small Parts and Bearings website.
Pins - Side Thrust - Double Sided - Steel Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Steel ball and elasticised spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Double Sided - Steel Ball.
Related Information:
There is also a good range of Pins - Side Thrust - Double Sided - Steel Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Plastic Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Plastic ball and stainless spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Single Sided - Plastic Ball.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Plastic Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Stainless Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Stainless ball and stainless spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Single Sided - Stainless Ball.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Stainless Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Steel Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Steel ball and elasticised spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Single Sided - Steel Ball.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Steel Ball on the Small Parts and Bearings website.
Rod - Round - Aluminium
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.
Rod - Round - Brass
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.
Rod - Round - Copper
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
There is also a good range of Rod - Round - Copper on the Small Parts and Bearings website.
Bearings - Single Row Ball Chamfered Edges - Standard
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP. This category may be available in the new MBA online store at Bearings - Single Row Ball Chamfered Edges - Standard.
Related Information:
There is also a good range of Bearings - Single Row Ball Chamfered Edges - Standard on the Small Parts and Bearings website.
Rod - Round - Stainless Steel
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
There is also a good range of Rod - Round - Stainless Steel on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227673 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
