Locking Bushings Categories
Bushings - Integral Taper
Stainless Steel Taper Bushings.
Will not mar shafts. This category may be available in the new MBA online store at Bushings - Integral Taper.
There is also a good range of Bushings - Integral Taper on the Small Parts and Bearings website.
Elements - Locking
2.4 to 2200 Nm, 6-80mm Bores
ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8. This category may be available in the new MBA online store at Elements - Locking.
There is also a good range of Elements - Locking on the Small Parts and Bearings website.
Bushings - Snap - Closed
Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Open snap bushings are designed to provide protection from sharp edges where cable or hose runs through plate steel.
Similar to a bung, but designed with expanding catch for use in holes in sheet products. Also see grommets for a similar product made from rubber. This category may be available in the new MBA online store at Bushings - Snap - Closed.
Related Information:
There is also a good range of Bushings - Snap - Closed on the Small Parts and Bearings website.
Bushings - Snap - Open
Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.
Also called a dome plug. Also see grommets for a similar product made from rubber. This category may be available in the new MBA online store at Bushings - Snap - Open.
Related Information:
There is also a good range of Bushings - Snap - Open on the Small Parts and Bearings website.
Pins - Dowel Bushings
Series DB100 Spirol
Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12. This category may be available in the new MBA online store at Pins - Dowel Bushings.
Related Information:
There is also a good range of Pins - Dowel Bushings on the Small Parts and Bearings website.
Bushings - QD
Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing
Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley. This category may be available in the new MBA online store at Bushings - QD.
Related Information:
There is also a good range of Bushings - QD on the Small Parts and Bearings website.
Bushings - Taperlock
This category may be available in the new MBA online store at Bushings - Taperlock.
There is also a good range of Bushings - Taperlock on the Small Parts and Bearings website.
Bushings - Spherical - Plastic
Plastic spherical plain bearings. Also known as ball bushings.
Ball Material W300. Housing Iglidur G. Maintenance Free. Self lubricating. Compensates for axial loads and misalignment. Corrosion resistant. High vibration dampening capacity.
There is also a good range of Bushings - Spherical - Plastic on the Small Parts and Bearings website.
Bushings - Spherical - Steel - With Oil Hole and Wiper Seal
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment. This category may be available in the new MBA online store at Bushings - Spherical - Steel - With Oil Hole and Wiper Seal.
There is also a good range of Bushings - Spherical - Steel - With Oil Hole and Wiper Seal on the Small Parts and Bearings website.
Bushings - Spherical - Steel - With Oil Hole - Standard
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment. This category may be available in the new MBA online store at Bushings - Spherical - Steel - With Oil Hole - Standard.
There is also a good range of Bushings - Spherical - Steel - With Oil Hole - Standard on the Small Parts and Bearings website.
Bushings - Spherical - Steel - Without Oil Hole
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment. This category may be available in the new MBA online store at Bushings - Spherical - Steel - Without Oil Hole.
There is also a good range of Bushings - Spherical - Steel - Without Oil Hole on the Small Parts and Bearings website.
Bushings - Spherical - Steel - With Wiper Seal
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment. This category may be available in the new MBA online store at Bushings - Spherical - Steel - With Wiper Seal.
There is also a good range of Bushings - Spherical - Steel - With Wiper Seal on the Small Parts and Bearings website.
Bushings - Drill - Liner Type - Headless - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Liner Type - Headless - Hardened Steel.
There is also a good range of Bushings - Drill - Liner Type - Headless - Hardened Steel on the Small Parts and Bearings website.
Bushings - Drill - Press Fit - Headless - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Press Fit - Headless - Hardened Steel.
There is also a good range of Bushings - Drill - Press Fit - Headless - Hardened Steel on the Small Parts and Bearings website.
Bushings - Drill - Press Fit - Headless - Tungsten Carbide
Designed to guide, position, and support the cutting tool in a metalworking jig.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 67-69. This category may be available in the new MBA online store at Bushings - Drill - Press Fit - Headless - Tungsten Carbide.
There is also a good range of Bushings - Drill - Press Fit - Headless - Tungsten Carbide on the Small Parts and Bearings website.
Bushings - Drill - Press Fit - Standard Head - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Press Fit - Standard Head - Hardened Steel.
There is also a good range of Bushings - Drill - Press Fit - Standard Head - Hardened Steel on the Small Parts and Bearings website.
Bushings - Drill - Slip - With Head - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Slip - With Head - Hardened Steel.
There is also a good range of Bushings - Drill - Slip - With Head - Hardened Steel on the Small Parts and Bearings website.
Bushings - Tension
Like a heavy duty roll pin.
Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications. This category may be available in the new MBA online store at Bushings - Tension.
There is also a good range of Bushings - Tension on the Small Parts and Bearings website.
Bushings - Stroke Rotary - Miniature
2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.
Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.
Related Information:
There is also a good range of Bushings - Stroke Rotary - Miniature on the Small Parts and Bearings website.
Bushings - Shoulder
This category may be available in the new MBA online store at Bushings - Shoulder.
There is also a good range of Bushings - Shoulder on the Small Parts and Bearings website.
Cam Followers - Bronze Bushing - Self Lubricating
This category may be available in the new MBA online store at Cam Followers - Bronze Bushing - Self Lubricating.
Mounts - Bonded - Tee Bushing - Centre Bolt
Vibration isolation for mobile and static applications involving plate clamping
Reduces structure borne noise and absorbs shock forces. Low profile height. This category may be available in the new MBA online store at Mounts - Bonded - Tee Bushing - Centre Bolt.
Related Information:
There is also a good range of Mounts - Bonded - Tee Bushing - Centre Bolt on the Small Parts and Bearings website.
Spacers - Machinery Bushings
Used as spacers between pulleys, gears etc
Low carbon mild steel. This category may be available in the new MBA online store at Spacers - Machinery Bushings.
There is also a good range of Spacers - Machinery Bushings on the Small Parts and Bearings website.
Dual Vee - Adaptor Bushings
Vee grooved track roller bushings.
Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned. This category may be available in the new MBA online store at Dual Vee - Adaptor Bushings.
Related Information:
There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.
Assemblies - Locking - Flanged
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
There is also a good range of Assemblies - Locking - Flanged on the Small Parts and Bearings website.
Bushes - Plastic Flanged - Iglidur G
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic Flanged - Iglidur G on the Small Parts and Bearings website.
Bushes - Plastic Unflanged - Iglidur G
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic Unflanged - Iglidur G on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - 303 stainless Steel.
There is also a good range of Plungers - Indexing - Locking - With Knob - 303 stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - Steel.
There is also a good range of Plungers - Indexing - Locking - With Knob - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Stainless Steel.
There is also a good range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Locking - With Shoulder - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Steel.
There is also a good range of Plungers - Indexing - Locking - With Shoulder - Steel on the Small Parts and Bearings website.
Handles - Latching T Handle - Locking
90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.
This category may be available in the new MBA online store at Handles - Latching T Handle - Locking.
Related Information:
There is also a good range of Handles - Latching T Handle - Locking on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Stainless Steel.
There is also a good range of Plungers - Indexing - Non Locking - Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Steel.
There is also a good range of Plungers - Indexing - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
There is also a good range of Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - With Knob - Steel.
There is also a good range of Plungers - Indexing - Non Locking - With Knob - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
There is also a good range of Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - Without Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Without Knob - Steel.
There is also a good range of Plungers - Indexing - Non Locking - Without Knob - Steel on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob on the Small Parts and Bearings website.
Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob on the Small Parts and Bearings website.
Plungers - Indexing Precision - Locking - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
This category may be available in the new MBA online store at Plungers - Indexing Precision - Locking - Ball Grip.
There is also a good range of Plungers - Indexing Precision - Locking - Ball Grip on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Stainless-Acetal.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Stainless-Phenolic.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Phenolic on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless - Standard - Standard
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless - Standard - Standard on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - SteeL Acetal
Steel body and acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - SteeL Acetal.
There is also a good range of Plungers - Spring - L Handle - Locking - SteeL Acetal on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - SteeL Phenolic
Steel body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - SteeL Phenolic.
There is also a good range of Plungers - Spring - L Handle - Locking - SteeL Phenolic on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Steel - Standard - Standard
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - L Handle - Locking - Steel - Standard - Standard on the Small Parts and Bearings website.
Pins - Clevis - Groove Locking - Stainless Steel 300 Grade
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Groove Locking - Stainless Steel 300 Grade.
Related Information:
There is also a good range of Pins - Clevis - Groove Locking - Stainless Steel 300 Grade on the Small Parts and Bearings website.
Pins - Clevis - Groove Locking - Zinc Plated
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Groove Locking - Zinc Plated.
Related Information:
There is also a good range of Pins - Clevis - Groove Locking - Zinc Plated on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227673 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
