Miniature Bearings Australia Pty Ltd

Locking Assemblies Categories


Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

There is also a good range of Assemblies - Locking - Flanged on the Small Parts and Bearings website.


You may also be interested in

Snaps


Snaps - Spring - Interlocking - Style 1
Snaps - Spring - Interlocking - Style 1

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 1.

There is also a good range of Snaps - Spring - Interlocking - Style 1 on the Small Parts and Bearings website.


Snaps - Spring - Interlocking - Style 2
Snaps - Spring - Interlocking - Style 2

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 2.

There is also a good range of Snaps - Spring - Interlocking - Style 2 on the Small Parts and Bearings website.


Snaps - Spring - Interlocking - Style 3
Snaps - Spring - Interlocking - Style 3

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 3.

There is also a good range of Snaps - Spring - Interlocking - Style 3 on the Small Parts and Bearings website.


Linear - Assemblies - Ball Slide - Precision
Linear - Assemblies - Ball Slide - Precision


These precision ball slides have a typical coefficient of friction of 0.003 and provide straight line accuracy of 0.0005mm per mm of travel.

At load capacity a life of 250 million mm of travel can be expected. The expected life at half load capacity is 2.5 billion mm. Factory preload adjustment prevents sideplay and backlash. Lightweight aluminium carriage and base with high load capacity. Four tapped and threaded carriage holes and counterbored base holes simplify installation and component mounting. Long life, self cleaning ball bearing needs no lubrication. Positional repeatability 0.005mm. Clear anodised finish.

There is also a good range of Linear - Assemblies - Ball Slide - Precision on the Small Parts and Bearings website.


Linear Slide Assemblies - Cross Roller
Linear Slide Assemblies - Cross Roller

Also see combined categories:
All Linear Slide Assemblies

Higher load capacity than precision ball slide assemblies. High cycling rates. Tolerant of shock and overhanging loads.

Accuracy of 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm. Not as naturally cleaning as ball slides. A good choice for environments protected from dust, and when heavy loads are a consideration. Positive stops prevent over-travel. Rollers improve capacity 8-10 times that of balls. Alternately crossed rollers handle force in any direction. Lightweight aluminium carriage and base. Interchangeable with many types of ball slides. Four tapped carriage holes and two counter bored base holes simplify installation and component mounting. This category may be available in the new MBA online store at Linear Slide Assemblies - Cross Roller.

There is also a good range of Linear Slide Assemblies - Cross Roller on the Small Parts and Bearings website.


Linear Slide Assemblies - Plain - Low Profile - High Load
Linear Slide Assemblies - Plain - Low Profile - High Load

Also see combined categories:
All Linear Slide Assemblies

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.

There is also a good range of Linear Slide Assemblies - Plain - Low Profile - High Load on the Small Parts and Bearings website.


Magnets - Cup Assemblies - Clips
Magnets - Cup Assemblies - Clips

Also see combined categories:
All Magnets
All Cup Magnets

This category may be available in the new MBA online store at Magnets - Cup Assemblies - Clips.

There is also a good range of Magnets - Cup Assemblies - Clips on the Small Parts and Bearings website.


Magnets - Cup Assemblies - Loop
Magnets - Cup Assemblies - Loop

Also see combined categories:
All Magnets
All Cup Magnets

Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.

Plated cup with a 9.525mm ID loop. This category may be available in the new MBA online store at Magnets - Cup Assemblies - Loop.

There is also a good range of Magnets - Cup Assemblies - Loop on the Small Parts and Bearings website.


Magnets - Cup Assemblies - Stud
Magnets - Cup Assemblies - Stud

Also see combined categories:
All Magnets
All Cup Magnets

This category may be available in the new MBA online store at Magnets - Cup Assemblies - Stud.

There is also a good range of Magnets - Cup Assemblies - Stud on the Small Parts and Bearings website.


Magnets - Cup Assemblies - Through Hole
Magnets - Cup Assemblies - Through Hole

Also see combined categories:
All Magnets
All Cup Magnets

This category may be available in the new MBA online store at Magnets - Cup Assemblies - Through Hole.

There is also a good range of Magnets - Cup Assemblies - Through Hole on the Small Parts and Bearings website.


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles. This category may be available in the new MBA online store at Spring Motor Assemblies - Open - RINO.

There is also a good range of Spring Motor Assemblies - Open - RINO on the Small Parts and Bearings website.


Pins - Ball Lock - Keyring Style - Steel
Pins - Ball Lock - Keyring Style - Steel

Also see combined categories:
All Ball Lock Pins
All Keyring Style Ball Lock Pins

Economical pins that can be used in military or conventional equipment.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Positive lock detent pins. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins. This category may be available in the new MBA online store at Pins - Ball Lock - Keyring Style - Steel.

Related Information:

There is also a good range of Pins - Ball Lock - Keyring Style - Steel on the Small Parts and Bearings website.


Turntable - Lockable
Turntable - Lockable


Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.

Similar to lazy susans but heavy duty. This category may be available in the new MBA online store at Turntable - Lockable.

Related Information:

There is also a good range of Turntable - Lockable on the Small Parts and Bearings website.


Turntable - Non-Lockable
Turntable - Non-Lockable


Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.

Similar to lazy susans but heavy duty. This category may be available in the new MBA online store at Turntable - Non-Lockable.

Related Information:

There is also a good range of Turntable - Non-Lockable on the Small Parts and Bearings website.


Elements - Locking
Elements - Locking

Also see combined categories:
All Locking Assemblies

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8. This category may be available in the new MBA online store at Elements - Locking.

There is also a good range of Elements - Locking on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - 303 stainless Steel.

There is also a good range of Plungers - Indexing - Locking - With Knob - 303 stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Knob - Steel
Plungers - Indexing - Locking - With Knob - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - Steel.

There is also a good range of Plungers - Indexing - Locking - With Knob - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Plungers - Indexing - Locking - With Shoulder - Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Stainless Steel.

There is also a good range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Steel
Plungers - Indexing - Locking - With Shoulder - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Steel.

There is also a good range of Plungers - Indexing - Locking - With Shoulder - Steel on the Small Parts and Bearings website.


Bushings - Integral Taper
Bushings - Integral Taper

Also see combined categories:
All Locking Assemblies
All Locking Bushings

Stainless Steel Taper Bushings.

Will not mar shafts. This category may be available in the new MBA online store at Bushings - Integral Taper.

There is also a good range of Bushings - Integral Taper on the Small Parts and Bearings website.


Handles - Latching T Handle - Locking
Handles - Latching T Handle - Locking

Also see combined categories:
All T Handles

90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.

This category may be available in the new MBA online store at Handles - Latching T Handle - Locking.

Related Information:

There is also a good range of Handles - Latching T Handle - Locking on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Stainless Steel
Plungers - Indexing - Non Locking - Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Stainless Steel.

There is also a good range of Plungers - Indexing - Non Locking - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Steel
Plungers - Indexing - Non Locking - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Steel.

There is also a good range of Plungers - Indexing - Non Locking - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel
Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.

There is also a good range of Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Knob - Steel
Plungers - Indexing - Non Locking - With Knob - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - With Knob - Steel.

There is also a good range of Plungers - Indexing - Non Locking - With Knob - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel
Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.

There is also a good range of Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Without Knob - Steel
Plungers - Indexing - Non Locking - Without Knob - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Without Knob - Steel.

There is also a good range of Plungers - Indexing - Non Locking - Without Knob - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob
Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob
Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob
Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob on the Small Parts and Bearings website.


Plungers - Indexing Precision - Locking - Ball Grip
Plungers - Indexing Precision - Locking - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing Precision - Locking - Ball Grip.

There is also a good range of Plungers - Indexing Precision - Locking - Ball Grip on the Small Parts and Bearings website.


Plungers - Spring - L Handle - Locking - Stainless-Acetal
Plungers - Spring - L Handle - Locking - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Stainless-Acetal.

There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Acetal on the Small Parts and Bearings website.


Plungers - Spring - L Handle - Locking - Stainless-Phenolic
Plungers - Spring - L Handle - Locking - Stainless-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Stainless-Phenolic.

There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Phenolic on the Small Parts and Bearings website.


Plungers - Spring - L Handle - Locking - Stainless - Standard - Standard
Plungers - Spring - L Handle - Locking - Stainless - Standard - Standard

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Spring - L Handle - Locking - Stainless - Standard - Standard on the Small Parts and Bearings website.


Plungers - Spring - L Handle - Locking - SteeL Acetal
Plungers - Spring - L Handle - Locking - SteeL Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - SteeL Acetal.

There is also a good range of Plungers - Spring - L Handle - Locking - SteeL Acetal on the Small Parts and Bearings website.


Plungers - Spring - L Handle - Locking - SteeL Phenolic
Plungers - Spring - L Handle - Locking - SteeL Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - SteeL Phenolic.

There is also a good range of Plungers - Spring - L Handle - Locking - SteeL Phenolic on the Small Parts and Bearings website.


Plungers - Spring - L Handle - Locking - Steel - Standard - Standard
Plungers - Spring - L Handle - Locking - Steel - Standard - Standard

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

There is also a good range of Plungers - Spring - L Handle - Locking - Steel - Standard - Standard on the Small Parts and Bearings website.


Pins - Clevis - Groove Locking - Stainless Steel 300 Grade
Pins - Clevis - Groove Locking - Stainless Steel 300 Grade

Also see combined categories:
All Clevis Pins

Match with a suitable E-Clip or Circlip to suit groove size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Groove Locking - Stainless Steel 300 Grade.

Related Information:

There is also a good range of Pins - Clevis - Groove Locking - Stainless Steel 300 Grade on the Small Parts and Bearings website.


Pins - Clevis - Groove Locking - Zinc Plated
Pins - Clevis - Groove Locking - Zinc Plated

Also see combined categories:
All Clevis Pins

Match with a suitable E-Clip or Circlip to suit groove size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Groove Locking - Zinc Plated.

Related Information:

There is also a good range of Pins - Clevis - Groove Locking - Zinc Plated on the Small Parts and Bearings website.


Pins - Clevis - Pin Locking - Low Carbon Steel
Pins - Clevis - Pin Locking - Low Carbon Steel

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Made from low carbon steel. This category may be available in the new MBA online store at Pins - Clevis - Pin Locking - Low Carbon Steel.

Related Information:

There is also a good range of Pins - Clevis - Pin Locking - Low Carbon Steel on the Small Parts and Bearings website.


Pins - Clevis - Pin Locking - Stainless Steel 300 Grade
Pins - Clevis - Pin Locking - Stainless Steel 300 Grade

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. This category may be available in the new MBA online store at Pins - Clevis - Pin Locking - Stainless Steel 300 Grade.

Related Information:

There is also a good range of Pins - Clevis - Pin Locking - Stainless Steel 300 Grade on the Small Parts and Bearings website.


Pins - Clevis - Pin Locking - Stainless Steel 316
Pins - Clevis - Pin Locking - Stainless Steel 316

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. This category may be available in the new MBA online store at Pins - Clevis - Pin Locking - Stainless Steel 316.

Related Information:

There is also a good range of Pins - Clevis - Pin Locking - Stainless Steel 316 on the Small Parts and Bearings website.


Pins - Clevis - Pin Locking - Zinc Plated
Pins - Clevis - Pin Locking - Zinc Plated

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. This category may be available in the new MBA online store at Pins - Clevis - Pin Locking - Zinc Plated.

Related Information:

There is also a good range of Pins - Clevis - Pin Locking - Zinc Plated on the Small Parts and Bearings website.


Pins - Clevis - Self Locking - Zinc Plated
Pins - Clevis - Self Locking - Zinc Plated

Also see combined categories:
All Ball Lock Pins
All Clevis Pins

Inexpensive ball lock pin type. No need for cotter pins.

Self locking and reusable with a spring loaded ball lock. Zinc plated low carbon steel with stainless steel ball. This category may be available in the new MBA online store at Pins - Clevis - Self Locking - Zinc Plated.

Related Information:

There is also a good range of Pins - Clevis - Self Locking - Zinc Plated on the Small Parts and Bearings website.


Plungers - Indexing Unthreaded - Non Locking - Steel - With Knob
Plungers - Indexing Unthreaded - Non Locking - Steel - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing Unthreaded - Non Locking - Steel - With Knob.

There is also a good range of Plungers - Indexing Unthreaded - Non Locking - Steel - With Knob on the Small Parts and Bearings website.


Plungers - Indexing Unthreaded - Non Locking - Steel - Without Knob
Plungers - Indexing Unthreaded - Non Locking - Steel - Without Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing Unthreaded - Non Locking - Steel - Without Knob on the Small Parts and Bearings website.


Plungers - Indexing with Plate - Locking - Steel
Plungers - Indexing with Plate - Locking - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position. This category may be available in the new MBA online store at Plungers - Indexing with Plate - Locking - Steel.

There is also a good range of Plungers - Indexing with Plate - Locking - Steel on the Small Parts and Bearings website.


Plungers - Spring - Acetal Handle - Locking - Stainless
Plungers - Spring - Acetal Handle - Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Acetal Handle - Locking - Stainless.

There is also a good range of Plungers - Spring - Acetal Handle - Locking - Stainless on the Small Parts and Bearings website.


Plungers - Spring - Acetal Handle - Locking - Steel
Plungers - Spring - Acetal Handle - Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Acetal Handle - Locking - Steel.

There is also a good range of Plungers - Spring - Acetal Handle - Locking - Steel on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.