Linear Bearings Categories
Bearings - Linear - Ball - Closed
Standard closed type to run on standard 60HRC shafts with h6 tolerances
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.
Related Information:
A larger range of Bearings - Linear - Ball - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Closed on the Small Parts and Bearings website.
Bearings - Linear - Ball - Miniature - Super High Precision
High Precision Corrosion Resistant Miniature Linear Bearings.
High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.
Related Information:
A larger range of Bearings - Linear - Ball - Miniature - Super High Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Miniature - Super High Precision on the Small Parts and Bearings website.
Bearings - Linear - Ball - Stainless Steel - Closed
Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.
Related Information:
A larger range of Bearings - Linear - Ball - Stainless Steel - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Stainless Steel - Closed on the Small Parts and Bearings website.
Bearings - Linear - Ball - Thomson Precision Steel - Closed
For running on shafts fixed at the ends.
Related Information:
A larger range of Bearings - Linear - Ball - Thomson Precision Steel - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Thomson Precision Steel - Closed on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Closed - Precision
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Closed - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Closed - Standard
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Closed - Standard on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Open - Precision
Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Open - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Open - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Open - Standard
Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Open - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Open - Standard on the Small Parts and Bearings website.
Bearings - Linear - Frelon J Lined - Closed - Precision
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon J Lined - Closed - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon J Lined - Closed - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon J Lined - Closed - Standard
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon J Lined - Closed - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon J Lined - Closed - Standard on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.
A larger range of Bearings - Linear - Sliding - Ceramic Coated might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Ceramic Coated on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Closed
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Open
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Open might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Small Parts and Bearings website.
Seals - For Linear Bearings - Closed
A larger range of Seals - For Linear Bearings - Closed might be available on the Bearing Shop Online site. There is also a good range of Seals - For Linear Bearings - Closed on the Small Parts and Bearings website.
Seals - For Linear Bearings - Open
A larger range of Seals - For Linear Bearings - Open might be available on the Bearing Shop Online site. There is also a good range of Seals - For Linear Bearings - Open on the Small Parts and Bearings website.
Linear Bearing Housings
Housings - Linear - Square - Clamps
A larger range of Housings - Linear - Square - Clamps might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Square - Clamps on the Small Parts and Bearings website.
Linear Bearings with Housing
Housings - Linear - Square
Used to maintain radial integrity and eliminate the need for parallel shafting.
Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.
A larger range of Housings - Linear - Square might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Square on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Flanged
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Flanged might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Flanged on the Small Parts and Bearings website.
Housings - Bearing - Flange Mounted - Frelon - Self Aligning
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
There is also a good range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Precision - Open
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Open might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Precision - Open on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Standard - Closed
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Standard - Open
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Open might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Standard - Open on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Flanged
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Flanged might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Flanged on the Small Parts and Bearings website.
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.
A larger range of Housings - Linear - Pillow Block - Closed - Ceramic Coated might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Pillow Block - Closed - Ceramic Coated on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Pillow Block - Closed
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Pillow Block - Closed might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Pillow Block - Closed on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed on the Small Parts and Bearings website.
You may also be interested in
Ball Splines Linear
Linear Ball Splines - Bearings - Unflanged
Use with Linear Ball Spline Shaft.
Related Information:
A larger range of Linear Ball Splines - Bearings - Unflanged might be available on the Bearing Shop Online site. There is also a good range of Linear Ball Splines - Bearings - Unflanged on the Small Parts and Bearings website.
Drylin Bearings and Systems
Drylin Linear Assembly Parts - Carriage Only
Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.
Drylin(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.
Related Information:
There is also a good range of Drylin Linear Assembly Parts - Carriage Only on the Small Parts and Bearings website.
Drylin Sliding Bearings
Linear sliding motion. Use with Drylin Aluminium Shafts.
Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).
Related Information:
A larger range of Drylin Sliding Bearings might be available on the Bearing Shop Online site. There is also a good range of Drylin Sliding Bearings on the Small Parts and Bearings website.
Bearings Special Purpose
Bearings - Chamfered Edges
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.
Related Information:
A larger range of Bearings - Chamfered Edges might be available on the Bearing Shop Online site. There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.
Clamping Rings
Rings - Retaining - C Type External - For Linear Bearings
Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.
There is also a good range of Rings - Retaining - C Type External - For Linear Bearings on the Small Parts and Bearings website.
Drylin Bearings and Systems
Drylin Linear Assembly Parts - Guide Rails Only
These rails require a matching carriage as listed in a separate category. Match by size.
Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.
Related Information:
There is also a good range of Drylin Linear Assembly Parts - Guide Rails Only on the Small Parts and Bearings website.
Drylin - Linear - Slides and Carriages - Size 17
Linear sliding motion.
Guide Rail Weight: 150 g/m. Carriage Weight: 1.7g. Max Rail Length: 1960 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.
Related Information:
There is also a good range of Drylin - Linear - Slides and Carriages - Size 17 on the Small Parts and Bearings website.
Drylin - Linear - Slides and Carriages - Size 27
Linear sliding motion.
Guide Rail Weight: 290 g/m. Carriage Weight: 10.8 or 12.5g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.
Related Information:
There is also a good range of Drylin - Linear - Slides and Carriages - Size 27 on the Small Parts and Bearings website.
Drylin - Linear - Slides and Carriages - Size 80
Linear sliding motion.
Guide Rail Weight: 1140 g/m. Carriage Weight: 100g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.
Related Information:
There is also a good range of Drylin - Linear - Slides and Carriages - Size 80 on the Small Parts and Bearings website.
Linear Slides
Slides - Linear - Cross Roller Rail
Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.
Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.
There is also a good range of Slides - Linear - Cross Roller Rail on the Small Parts and Bearings website.
Drylin Bearings and Systems
Drylin Sliding Film
Linear sliding motion. Use with Drylin Aluminium Shafts.
Sliding film Iglidur J.
Related Information:
There is also a good range of Drylin Sliding Film on the Small Parts and Bearings website.
Clamping Rings
Rings - Retaining - PR Type Internal - For Linear Bearings
Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.
There is also a good range of Rings - Retaining - PR Type Internal - For Linear Bearings on the Small Parts and Bearings website.
Linear Slides
Linear Guide System - Two Piece
Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.
Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems.
A larger range of Linear Guide System - Two Piece might be available on the Bearing Shop Online site. There is also a good range of Linear Guide System - Two Piece on the Small Parts and Bearings website.
Ball Splines Linear
Linear Ball Splines - Shaft
Use with either flanged or unflanged Linear Ball Spline Bearings.
Related Information:
A larger range of Linear Ball Splines - Shaft might be available on the Bearing Shop Online site. There is also a good range of Linear Ball Splines - Shaft on the Small Parts and Bearings website.
Linear Slides
Linear Slides - Utilitrak - CR - Carriage
Use with Utilitrak CR Channel. Stainless steel wheels with sealed bearings. Match by size.
Related Information:
A larger range of Linear Slides - Utilitrak - CR - Carriage might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Utilitrak - CR - Carriage on the Small Parts and Bearings website.
Bearings Special Purpose
Bearings - Spherical OD
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems.
Related Information:
A larger range of Bearings - Spherical OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.
Linear Slides
Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Lever - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Front Disconnect - Lever - Full Ext on the Small Parts and Bearings website.
Linear Slides - Cross Roller Tables - Aluminium
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
A larger range of Linear Slides - Cross Roller Tables - Aluminium might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Cross Roller Tables - Aluminium on the Small Parts and Bearings website.
Linear Slides - Cross Roller Tables - Steel
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
A larger range of Linear Slides - Cross Roller Tables - Steel might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Cross Roller Tables - Steel on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.
There is also a good range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Latch Lever - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Front Disconnect - Latch Lever - Full Ext on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125388 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
