Linear Bearings Categories
Bearings - Linear - Ball - Closed
Standard closed type to run on standard 60HRC shafts with h6 tolerances
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous. This category may be available in the new MBA online store at Bearings - Linear - Ball - Closed.
Related Information:
A larger range of Bearings - Linear - Ball - Closed might be available on the Bearing Shop Online site.
Bearings - Linear - Ball - Miniature - Super High Precision
High Precision Corrosion Resistant Miniature Linear Bearings.
High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.
Related Information:
A larger range of Bearings - Linear - Ball - Miniature - Super High Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Miniature - Super High Precision on the Small Parts and Bearings website.
Bearings - Linear - Ball - Stainless Steel - Closed
Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous. This category may be available in the new MBA online store at Bearings - Linear - Ball - Stainless Steel - Closed.
Related Information:
A larger range of Bearings - Linear - Ball - Stainless Steel - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Stainless Steel - Closed on the Small Parts and Bearings website.
Bearings - Linear - Ball - Thomson Precision Steel - Closed
For running on shafts fixed at the ends.
This category may be available in the new MBA online store at Bearings - Linear - Ball - Thomson Precision Steel - Closed.
Related Information:
A larger range of Bearings - Linear - Ball - Thomson Precision Steel - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Thomson Precision Steel - Closed on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Closed - Precision
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Closed - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Closed - Standard
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Closed - Standard on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Open - Precision
Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Open - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Open - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Open - Standard
Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Open - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Open - Standard on the Small Parts and Bearings website.
Bearings - Linear - Frelon J Lined - Closed - Precision
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon J Lined - Closed - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon J Lined - Closed - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon J Lined - Closed - Standard
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon J Lined - Closed - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon J Lined - Closed - Standard on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Ceramic Coated.
A larger range of Bearings - Linear - Sliding - Ceramic Coated might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Ceramic Coated on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Closed
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Stainless - PTFE - Closed.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Open
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Stainless - PTFE - Open.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Open might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Small Parts and Bearings website.
Seals - For Linear Bearings - Closed
This category may be available in the new MBA online store at Seals - For Linear Bearings - Closed.
A larger range of Seals - For Linear Bearings - Closed might be available on the Bearing Shop Online site. There is also a good range of Seals - For Linear Bearings - Closed on the Small Parts and Bearings website.
Seals - For Linear Bearings - Open
This category may be available in the new MBA online store at Seals - For Linear Bearings - Open.
A larger range of Seals - For Linear Bearings - Open might be available on the Bearing Shop Online site. There is also a good range of Seals - For Linear Bearings - Open on the Small Parts and Bearings website.
Linear Bearing Housings
Housings - Linear - Square - Clamps
This category may be available in the new MBA online store at Housings - Linear - Square - Clamps.
A larger range of Housings - Linear - Square - Clamps might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Square - Clamps on the Small Parts and Bearings website.
Linear Bearings with Housing
Housings - Linear - Square
Used to maintain radial integrity and eliminate the need for parallel shafting.
Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads. This category may be available in the new MBA online store at Housings - Linear - Square.
A larger range of Housings - Linear - Square might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Square on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Flanged
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Flanged might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Flanged on the Small Parts and Bearings website.
Housings - Bearing - Flange Mounted - Frelon - Self Aligning
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Flange Mounted - Frelon - Self Aligning.
A larger range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Precision - Closed.
A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Precision - Open
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Precision - Open.
A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Open might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Precision - Open on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Standard - Closed
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Standard - Closed.
A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Standard - Open
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Standard - Open.
A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Open might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pillow Block - Frelon - Standard - Open on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Flanged
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Flanged might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Flanged on the Small Parts and Bearings website.
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants. This category may be available in the new MBA online store at Housings - Linear - Pillow Block - Closed - Ceramic Coated.
A larger range of Housings - Linear - Pillow Block - Closed - Ceramic Coated might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Pillow Block - Closed - Ceramic Coated on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Pillow Block - Closed
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Pillow Block - Closed might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Pillow Block - Closed on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed on the Small Parts and Bearings website.
Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed
Includes Bearings.
Related Information:
A larger range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed might be available on the Bearing Shop Online site. There is also a good range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed on the Small Parts and Bearings website.
You may also be interested in
Ball Splines Linear
Linear Ball Splines - Bearings - Unflanged
Use with Linear Ball Spline Shaft.
This category may be available in the new MBA online store at Linear Ball Splines - Bearings - Unflanged.
Related Information:
A larger range of Linear Ball Splines - Bearings - Unflanged might be available on the Bearing Shop Online site. There is also a good range of Linear Ball Splines - Bearings - Unflanged on the Small Parts and Bearings website.
Bearings Special Purpose
Bearings - Chamfered Edges
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP. This category may be available in the new MBA online store at Bearings - Chamfered Edges.
Related Information:
A larger range of Bearings - Chamfered Edges might be available on the Bearing Shop Online site. There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.
Linear Slides
Slides - Linear - Cross Roller Rail
Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.
Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds. This category may be available in the new MBA online store at Slides - Linear - Cross Roller Rail.
A larger range of Slides - Linear - Cross Roller Rail might be available on the Bearing Shop Online site. There is also a good range of Slides - Linear - Cross Roller Rail on the Small Parts and Bearings website.
Linear Guide System - Two Piece
Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.
Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems. This category may be available in the new MBA online store at Linear Guide System - Two Piece.
A larger range of Linear Guide System - Two Piece might be available on the Bearing Shop Online site. There is also a good range of Linear Guide System - Two Piece on the Small Parts and Bearings website.
Ball Splines Linear
Linear Ball Splines - Shaft
Use with either flanged or unflanged Linear Ball Spline Bearings.
This category may be available in the new MBA online store at Linear Ball Splines - Shaft.
Related Information:
A larger range of Linear Ball Splines - Shaft might be available on the Bearing Shop Online site. There is also a good range of Linear Ball Splines - Shaft on the Small Parts and Bearings website.
Linear Slides
Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at Slides - Drawer - Front Disconnect - Friction - 19mm Ext.
There is also a good range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Lever - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at Slides - Drawer - Front Disconnect - Lever - Full Ext.
There is also a good range of Slides - Drawer - Front Disconnect - Lever - Full Ext on the Small Parts and Bearings website.
Linear Slides - Cross Roller Tables - Aluminium
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Aluminium.
A larger range of Linear Slides - Cross Roller Tables - Aluminium might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Cross Roller Tables - Aluminium on the Small Parts and Bearings website.
Linear Slides - Cross Roller Tables - Steel
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Steel.
A larger range of Linear Slides - Cross Roller Tables - Steel might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Cross Roller Tables - Steel on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.
There is also a good range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage on the Small Parts and Bearings website.
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect. This category may be available in the new MBA online store at Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext.
There is also a good range of Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext on the Small Parts and Bearings website.
Shafting Aluminium
Shafting - Aluminium - Ceramic Coated
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated. This category may be available in the new MBA online store at Shafting - Aluminium - Ceramic Coated.
Related Information:
A larger range of Shafting - Aluminium - Ceramic Coated might be available on the Bearing Shop Online site. There is also a good range of Shafting - Aluminium - Ceramic Coated on the Small Parts and Bearings website.
Linear Slides
Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Low Profile - Crossed Roller Table - Aluminium.
A larger range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium on the Small Parts and Bearings website.
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.
There is also a good range of Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.
There is also a good range of Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext on the Small Parts and Bearings website.
Shafting Aluminium
Shafting - Aluminium - Ceramic Coated - Tapped
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated. This category may be available in the new MBA online store at Shafting - Aluminium - Ceramic Coated - Tapped.
Related Information:
A larger range of Shafting - Aluminium - Ceramic Coated - Tapped might be available on the Bearing Shop Online site. There is also a good range of Shafting - Aluminium - Ceramic Coated - Tapped on the Small Parts and Bearings website.
Linear Slides
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
A larger range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel on the Small Parts and Bearings website.
Shafting Precision Ground
Shafting - Pre Drilled and Tapped - Stainless Steel
For use with rail supports and open linear bearings
This category may be available in the new MBA online store at Shafting - Pre Drilled and Tapped - Stainless Steel.
A larger range of Shafting - Pre Drilled and Tapped - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Shafting - Pre Drilled and Tapped - Stainless Steel on the Small Parts and Bearings website.
Bearings Special Purpose
Bearings - Spherical OD
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems. This category may be available in the new MBA online store at Bearings - Spherical OD.
Related Information:
A larger range of Bearings - Spherical OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.
Shafting Precision Ground
Rail Supports - With Shaft - One Piece
One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.
Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments. This category may be available in the new MBA online store at Rail Supports - With Shaft - One Piece.
Related Information:
A larger range of Rail Supports - With Shaft - One Piece might be available on the Bearing Shop Online site. There is also a good range of Rail Supports - With Shaft - One Piece on the Small Parts and Bearings website.
Ball Transfers
Ball Transfer Units - Screw Stem - Stainless - Precision
Single ball bearings units for conveyor systems
Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Stainless - Precision.
A larger range of Ball Transfer Units - Screw Stem - Stainless - Precision might be available on the Bearing Shop Online site. There is also a good range of Ball Transfer Units - Screw Stem - Stainless - Precision on the Small Parts and Bearings website.
Ball Transfer Units - Screw Stem - Steel - Precision
Single ball bearings units for conveyor systems
Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Steel - Precision.
A larger range of Ball Transfer Units - Screw Stem - Steel - Precision might be available on the Bearing Shop Online site. There is also a good range of Ball Transfer Units - Screw Stem - Steel - Precision on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Catalogue
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Charity
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
McMaster Carr Cross Reference PDF
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 209441 products in 2115 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
