Leadscrews Categories
Leadscrew Nut Flanges for Acme Nuts
Flanges for Acme leadscrew thread nuts imperial
These flanges are screwed onto the outer thread of the red leadscrew nuts. This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved.
Related Information:
There is also a good range of Leadscrew Nut Flanges for Acme Nuts on the Small Parts and Bearings website.
Leadscrew Nut Flanges for Acme Supernuts
Flanges for Acme leadscrew thread supernuts metric and imperial
MATERIAL - Aluminum 6062-T6. These flanges are screwed onto the outer thread of the red leadscrew nuts. This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved.
Related Information:
There is also a good range of Leadscrew Nut Flanges for Acme Supernuts on the Small Parts and Bearings website.
Leadscrews - Imperial - Acme - Alloy Steel
Acme Leadscrew Thread - Use with Acme Supernuts
Alloy steel heat treated to RC 56-60.
Related Information:
There is also a good range of Leadscrews - Imperial - Acme - Alloy Steel on the Small Parts and Bearings website.
Leadscrews - Imperial - Acme - Stainless Steel 18.8
Acme Leadscrew Thread - Use with Acme Supernuts
Related Information:
There is also a good range of Leadscrews - Imperial - Acme - Stainless Steel 18.8 on the Small Parts and Bearings website.
Leadscrew Nuts - Imperial - Acme - Bronze
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Nut only. Match with appropriate leadscrew.
Related Information:
There is also a good range of Leadscrew Nuts - Imperial - Acme - Bronze on the Small Parts and Bearings website.
Leadscrew Nuts - Imperial - Acme - Plastic
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Related Information:
There is also a good range of Leadscrew Nuts - Imperial - Acme - Plastic on the Small Parts and Bearings website.
Leadscrew Nuts - Imperial - Supernuts - Acme
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Related Information:
There is also a good range of Leadscrew Nuts - Imperial - Supernuts - Acme on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Square - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Round - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Round - Metallic on the Small Parts and Bearings website.
Posi Drive Stage - Ball Slide
Compact economical Posi Drive Stages take the work out of designing linear motion control systems.
These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.
There is also a good range of Posi Drive Stage - Ball Slide on the Small Parts and Bearings website.
Posi Drive Stage - Crossed Roller
Compact economical Posi Drive Stages take the work out of designing linear motion control systems.
These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.
There is also a good range of Posi Drive Stage - Crossed Roller on the Small Parts and Bearings website.
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Roof Bolt - Steel on the Small Parts and Bearings website.
Mounts - Universal - For Acme Thread and Ballscrews
Use grade 8 hex socket head cap screws for mounting.
Related Information:
There is also a good range of Mounts - Universal - For Acme Thread and Ballscrews on the Small Parts and Bearings website.
Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel
Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
There is also a good range of Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel on the Small Parts and Bearings website.
Bolts - Eye - Full Threaded Shanks - Carbon Steel
Forged self coloured carbon steel.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
There is also a good range of Bolts - Eye - Full Threaded Shanks - Carbon Steel on the Small Parts and Bearings website.
Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel
304 Stainless Steel
Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
There is also a good range of Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel on the Small Parts and Bearings website.
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Forged self coloured carbon steel.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Forged zinc plated carbon steel.
Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated on the Small Parts and Bearings website.
Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel
Hot galvanised finished steel with machine thread.
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
There is also a good range of Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel on the Small Parts and Bearings website.
Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel
316 Stainless Steel
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
There is also a good range of Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel on the Small Parts and Bearings website.
Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel
Hot galvanised finished steel with machine thread.
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
There is also a good range of Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.
Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel
316 Stainless Steel
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
There is also a good range of Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated - Full Thread
BSW and METRIC - Set Screws
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated - Full Thread on the Small Parts and Bearings website.
Mounts - Leveling - Socket - Acme Thread - Gold Chromate
Levelling adjusters. Use acme thread to make a custom stud.
There is also a good range of Mounts - Leveling - Socket - Acme Thread - Gold Chromate on the Small Parts and Bearings website.
Mounts - Leveling - Socket - Acme Thread - Stainless
Levelling adjusters. Use acme thread to make a custom stud. 303 Stainless Steel.
There is also a good range of Mounts - Leveling - Socket - Acme Thread - Stainless on the Small Parts and Bearings website.
Mounts - Leveling - Studded - Acme Thread - Gold Chromate
Levelling adjusters.
There is also a good range of Mounts - Leveling - Studded - Acme Thread - Gold Chromate on the Small Parts and Bearings website.
Mounts - Leveling - Studded - Acme Thread - Stainless
Levelling adjusters. 303 Stainless Steel.
There is also a good range of Mounts - Leveling - Studded - Acme Thread - Stainless on the Small Parts and Bearings website.
Screws - Fillister Head - Brass - Philips
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Fillister Head - Brass - Philips on the Small Parts and Bearings website.
Screws - Fillister Head - Brass - Slotted
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Fillister Head - Brass - Slotted on the Small Parts and Bearings website.
Screws - Fillister Head - Steel - Philips
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Fillister Head - Steel - Philips on the Small Parts and Bearings website.
Screws - Fillister Head - Steel - Slotted
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Fillister Head - Steel - Slotted on the Small Parts and Bearings website.
Screws - Hex Head - Brass
Brass metal thread machine screws UNC and UNF
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Hex Head - Brass on the Small Parts and Bearings website.
Screws - Hex Head - Titanium CP Grade 1
Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Hex Head - Titanium CP Grade 1 on the Small Parts and Bearings website.
Screws - Panel - Jack - Steel
Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.
Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.
There is also a good range of Screws - Panel - Jack - Steel on the Small Parts and Bearings website.
Screws - Pan Head - 303-304 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Philips on the Small Parts and Bearings website.
Screws - Pan Head - 316 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - 316 Stainless - Philips on the Small Parts and Bearings website.
Screws - Pan Head - Aluminium
UNC metal thread machine screws
Nuts sold separately - See Fasteners - Nuts.
Related Information:
There is also a good range of Screws - Pan Head - Aluminium on the Small Parts and Bearings website.
Screws - Pan Head - Brass - Slotted
Brass metal thread machine screws METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - Brass - Slotted on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Philips
Metal Thread Screws UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Philips on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Pozidrive
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Pozidrive on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Slotted
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Slotted on the Small Parts and Bearings website.
Screws - Round Head - Brass - Slotted
Brass metal thread machine screws BSW - UNF - UNC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Round Head - Brass - Slotted on the Small Parts and Bearings website.
Screws - Round Head - Steel - Slotted
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Round Head - Steel - Slotted on the Small Parts and Bearings website.
Inserts - Thread Repair - Recoil
Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.
Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.
There is also a good range of Inserts - Thread Repair - Recoil on the Small Parts and Bearings website.
Ballscrew - Ground - Dia 4mm - Lead 1mm
Not for sale outside of Australia and New Zealand
There is also a good range of Ballscrew - Ground - Dia 4mm - Lead 1mm on the Small Parts and Bearings website.
Tools - Thread Repair
Quickly repairs damaged screws
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
There is also a good range of Tools - Thread Repair on the Small Parts and Bearings website.
Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v
Fully threaded hex head set screws (DIN933). Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Din 933. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated
BSW and METRIC - Bolts
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated on the Small Parts and Bearings website.
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Pan Head - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Slotted Shallow Head - Carbon Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Catalogue
Contact Us
Charity
Dental Bearings
Distributor Locations
Dowel Pins
Downloadable PDF Catalogue Ball Lock Pins
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Circlips
Downloadable PDF Catalogue Clevis Pins
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Disc Springs
Downloadable PDF Catalogue Dowel Pins
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue Hammer Drive Pins
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Key Steel
Downloadable PDF Catalogue Knobs
Downloadable PDF Catalogue Leveling Mounts
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue O-Rings
Downloadable PDF Catalogue Pins
Downloadable PDF Catalogue Plastic Bearings
Downloadable PDF Catalogue Polyvee Belts and Pulleys
Downloadable PDF Catalogue Precision Shim Washers
Downloadable PDF Catalogue Push On and Push In Rings
Downloadable PDF Catalogue Rod & Tube
Downloadable PDF Catalogue Roll Pins
Downloadable PDF Catalogue Shaft Collars
Downloadable PDF Catalogue Shim Sheet
Downloadable PDF Catalogue Shoulder Screws
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Snap Rings
Downloadable PDF Catalogue Socket Set Screws
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Spring Steel Strip
Downloadable PDF Catalogue Springs
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Taper Pins
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Catalogue Thumb Screws and Nuts
Downloadable PDF Catalogue Timing Belts
Downloadable PDF Catalogue Timing Pulley Stock
Downloadable PDF Catalogue Timing Pulleys
Downloadable PDF Catalogue Vibration Mounts
Downloadable PDF Catalogue Washers
Downloadable PDF Catalogue Wave Washers
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Anderton Circlips
Downloadable PDF Cross Reference Barden Bearings
Downloadable PDF Cross Reference Essentra
Downloadable PDF Cross Reference Flocast
Downloadable PDF Cross Reference K&S Metals
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference Nordex
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Ondrives
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Seeger Circlips
Downloadable PDF Cross Reference Sintered Bronze
Downloadable PDF Cross Reference Small Parts Inc
Downloadable PDF Cross Reference Timing Belts and Pulleys
Freight Rates and Shipping Times
Frequently Asked Questions
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Satellite Reaction Wheels
Shipping Rates and Times
Technical
Terms
5 Axis Machine Tool Bearings
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 131536 products in 2123 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
