Miniature Bearings Australia Pty Ltd

Leads And Connectors Categories


Leads - Hobby
Leads - Hobby


Adaptor leads for batteries, battery chargers, servos and receivers including Tamiya, Deans and Losi plugs.

Includes Deans and T Connectors. This category may be available in the new MBA online store at Leads - Hobby.

There is also a good range of Leads - Hobby on the Small Parts and Bearings website.


You may also be interested in

Belts Rounthane


Rounthane Connectors
Rounthane Connectors


Joinable belting connectors.

This category may be available in the new MBA online store at Rounthane Connectors.

Related Information:

There is also a good range of Rounthane Connectors on the Small Parts and Bearings website.


Yoke Ends


Yoke Ends - Blank
Yoke Ends - Blank

Also see combined categories:
All Yoke Ends

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at Yoke Ends - Blank.

Related Information:

There is also a good range of Yoke Ends - Blank on the Small Parts and Bearings website.


Yoke Ends - Threaded
Yoke Ends - Threaded

Also see combined categories:
All Yoke Ends

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at Yoke Ends - Threaded.

Related Information:

There is also a good range of Yoke Ends - Threaded on the Small Parts and Bearings website.


Spacers - Hex - Threaded - Steel
Spacers - Hex - Threaded - Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.

This category may be available in the new MBA online store at Spacers - Hex - Threaded - Steel.

There is also a good range of Spacers - Hex - Threaded - Steel on the Small Parts and Bearings website.


Spacers - Hex - Threaded - 316 Stainless Steel
Spacers - Hex - Threaded - 316 Stainless Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.

This category may be available in the new MBA online store at Spacers - Hex - Threaded - 316 Stainless Steel.

There is also a good range of Spacers - Hex - Threaded - 316 Stainless Steel on the Small Parts and Bearings website.


Spacers - Hex - Threaded - 303-304 Stainless Steel
Spacers - Hex - Threaded - 303-304 Stainless Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.

This category may be available in the new MBA online store at Spacers - Hex - Threaded - 303-304 Stainless Steel.

There is also a good range of Spacers - Hex - Threaded - 303-304 Stainless Steel on the Small Parts and Bearings website.


Rounthane Belts
Rounthane Belts


Joinable belting. 88 Shore A hardness. Yellow colour. Temperature range -31 to 65 Deg C (-25 to 150 Deg F).

Join with Rounthane Connectors (purchased separately). Material : Non Slip Polyurethane. FDA / USDA approved. Use with grooved idler pulleys with diameters at least 8 times the belt width. Purchased per 305mm (1 foot) of length. Orders for more than one length of 305mm will be supplied as a continuous length. We can obtain more than shown in stock, please contact us for a quotation.

Related Information:

There is also a good range of Rounthane Belts on the Small Parts and Bearings website.


Ballscrews - Ground - Dia 4mm - Lead 1mm
Ballscrews - Ground - Dia 4mm - Lead 1mm

Also see combined categories:
All Ball Screws

Not for sale outside of Australia and New Zealand

This category may be available in the new MBA online store at Ballscrews - Ground - Dia 4mm - Lead 1mm.

There is also a good range of Ballscrews - Ground - Dia 4mm - Lead 1mm on the Small Parts and Bearings website.


Bushes - Bronze Unflanged - Solid
Bushes - Bronze Unflanged - Solid

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Solid precision leaded gunmetal bronze bushes. C93200 as indicated in the listings.

Composition (Approx.) : Copper 81%, Tin 7%, Zinc 4%, Lead 6%, Nickel 2%. Hardness : 70-90 BHN. This category may be available in the new MBA online store at Bushes - Bronze Unflanged - Solid.

Related Information:

There is also a good range of Bushes - Bronze Unflanged - Solid on the Small Parts and Bearings website.


Hobby Accessories - Battery Holders
Hobby Accessories - Battery Holders


Miscellaneous battery accessories - Lipo safety charge sacks - Balancers - Leads - Battery Monitors - Etc

This category may be available in the new MBA online store at Hobby Accessories - Battery Holders.

Related Information:

There is also a good range of Hobby Accessories - Battery Holders on the Small Parts and Bearings website.


Bushes - Split - Stainless Steel and PTFE - Flanged
Bushes - Split - Stainless Steel and PTFE - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Split - Stainless Steel and PTFE - Flanged on the Small Parts and Bearings website.


Bushes - Split - Stainless Steel and PTFE - Unflanged
Bushes - Split - Stainless Steel and PTFE - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Split - Stainless Steel and PTFE - Unflanged on the Small Parts and Bearings website.


Bushes - Split - Steel - DU - Flanged
Bushes - Split - Steel - DU - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Split - Steel - DU - Flanged on the Small Parts and Bearings website.


Bushes - Split - Steel - DU - Unflanged
Bushes - Split - Steel - DU - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Split - Steel - DU - Unflanged on the Small Parts and Bearings website.


Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand
Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 6.90o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

There is also a good range of Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand on the Small Parts and Bearings website.


Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

There is also a good range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand on the Small Parts and Bearings website.


Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

There is also a good range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand on the Small Parts and Bearings website.


Worms - 24DP Series 1 - Metallic
Worms - 24DP Series 1 - Metallic

Also see combined categories:
All Worms
All Imperial Worms

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worms - 24DP Series 1 - Metallic.

Related Information:

There is also a good range of Worms - 24DP Series 1 - Metallic on the Small Parts and Bearings website.


Worm Gears - 24DP Series 1 - Plastic
Worm Gears - 24DP Series 1 - Plastic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 24DP Series 1 - Plastic.

Related Information:

There is also a good range of Worm Gears - 24DP Series 1 - Plastic on the Small Parts and Bearings website.


Worm Gears - 32DP Series 1 - Metallic
Worm Gears - 32DP Series 1 - Metallic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 32DP Series 1 - Metallic.

Related Information:

There is also a good range of Worm Gears - 32DP Series 1 - Metallic on the Small Parts and Bearings website.


Worm Gears - 32DP Series 1 - Plastic
Worm Gears - 32DP Series 1 - Plastic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 32DP Series 1 - Plastic.

Related Information:

There is also a good range of Worm Gears - 32DP Series 1 - Plastic on the Small Parts and Bearings website.


Worm Gears - 48DP Series 1 - Metallic
Worm Gears - 48DP Series 1 - Metallic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 48DP Series 1 - Metallic.

Related Information:

There is also a good range of Worm Gears - 48DP Series 1 - Metallic on the Small Parts and Bearings website.


Ballscrews - Nook Series - Right Hand
Ballscrews - Nook Series - Right Hand


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

High quality alloy steel, induction hardened to RC 56-60. Protective black oxide finish. Lead accurate by at least 0.00083mm per mm. This category may be available in the new MBA online store at Ballscrews - Nook Series - Right Hand.

There is also a good range of Ballscrews - Nook Series - Right Hand on the Small Parts and Bearings website.


Leadscrew Nut Flanges - for Acme Nuts
Leadscrew Nut Flanges - for Acme Nuts

Also see combined categories:
All Leadscrew Nut Flanges

Flanges for Acme leadscrew thread nuts imperial

These flanges are screwed onto the outer thread of the red leadscrew nuts. This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved. This category may be available in the new MBA online store at Leadscrew Nut Flanges - for Acme Nuts.

Related Information:

There is also a good range of Leadscrew Nut Flanges - for Acme Nuts on the Small Parts and Bearings website.


Leadscrew Nut Flanges - for Acme Supernuts
Leadscrew Nut Flanges - for Acme Supernuts

Also see combined categories:
All Leadscrew Nut Flanges

Flanges for Acme leadscrew thread supernuts metric and imperial

MATERIAL - Aluminum 6062-T6. These flanges are screwed onto the outer thread of the red leadscrew nuts. This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved. This category may be available in the new MBA online store at Leadscrew Nut Flanges - for Acme Supernuts.

Related Information:

There is also a good range of Leadscrew Nut Flanges - for Acme Supernuts on the Small Parts and Bearings website.


Leadscrew Nuts - Imperial - Acme - Bronze
Leadscrew Nuts - Imperial - Acme - Bronze

Also see combined categories:
All Leadscrew Nuts
All Imperial Leadscrew Nuts

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting

Nut only. Match with appropriate leadscrew. This category may be available in the new MBA online store at Leadscrew Nuts - Imperial - Acme - Bronze.

Related Information:

There is also a good range of Leadscrew Nuts - Imperial - Acme - Bronze on the Small Parts and Bearings website.


Leadscrew Nuts - Imperial - Acme - Plastic
Leadscrew Nuts - Imperial - Acme - Plastic

Also see combined categories:
All Leadscrew Nuts
All Imperial Leadscrew Nuts

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting

This category may be available in the new MBA online store at Leadscrew Nuts - Imperial - Acme - Plastic.

Related Information:

There is also a good range of Leadscrew Nuts - Imperial - Acme - Plastic on the Small Parts and Bearings website.


Leadscrew Nuts - Imperial - Supernuts - Acme
Leadscrew Nuts - Imperial - Supernuts - Acme

Also see combined categories:
All Leadscrew Nuts
All Imperial Leadscrew Nuts

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting

This category may be available in the new MBA online store at Leadscrew Nuts - Imperial - Supernuts - Acme.

Related Information:

There is also a good range of Leadscrew Nuts - Imperial - Supernuts - Acme on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Round - Metallic on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.


Leadscrews - Imperial - Acme - Alloy Steel
Leadscrews - Imperial - Acme - Alloy Steel

Also see combined categories:
All Imperial Leadscrews

Acme Leadscrew Thread - Use with Acme Supernuts

Alloy steel heat treated to RC 56-60. This category may be available in the new MBA online store at Leadscrews - Imperial - Acme - Alloy Steel.

Related Information:

There is also a good range of Leadscrews - Imperial - Acme - Alloy Steel on the Small Parts and Bearings website.


Leadscrews - Imperial - Acme - Stainless Steel 18.8
Leadscrews - Imperial - Acme - Stainless Steel 18.8

Also see combined categories:
All Imperial Leadscrews

Acme Leadscrew Thread - Use with Acme Supernuts

This category may be available in the new MBA online store at Leadscrews - Imperial - Acme - Stainless Steel 18.8.

Related Information:

There is also a good range of Leadscrews - Imperial - Acme - Stainless Steel 18.8 on the Small Parts and Bearings website.


Leadscrews - Metric - Rolled Thread - Stainless Steel
Leadscrews - Metric - Rolled Thread - Stainless Steel

Also see combined categories:
All Metric Leadscrews

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Stainless steel. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Related Information:


Bushes - Split - Steel - DP4 - Flanged
Bushes - Split - Steel - DP4 - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free. Speed Limit in oil 3 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Split - Steel - DP4 - Flanged on the Small Parts and Bearings website.


Washers - Thrust - DP4 Type
Washers - Thrust - DP4 Type

Also see combined categories:
All Thrust Washers

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free. This category may be available in the new MBA online store at Washers - Thrust - DP4 Type.

There is also a good range of Washers - Thrust - DP4 Type on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.