Miniature Bearings Australia Pty Ltd

Latches Quarter Turn Categories


Latches - 1-4 Turn - Simple
Latches - 1-4 Turn - Simple


With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. This category may be available in the new MBA online store at Latches - 1-4 Turn - Simple.

There is also a good range of Latches - 1-4 Turn - Simple on the Small Parts and Bearings website.


Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip


Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately. This category may be available in the new MBA online store at Latches - 110 Series - Adjustable Grip.

There is also a good range of Latches - 110 Series - Adjustable Grip on the Small Parts and Bearings website.


Handles - Tee
Handles - Tee


Zinc plated steel 7.94mm (5/16in.) square shank.

This category may be available in the new MBA online store at Handles - Tee.

There is also a good range of Handles - Tee on the Small Parts and Bearings website.


Handles - Latching Padlocking
Handles - Latching Padlocking


Zinc finished iron/steel construction. Has 5/16in. Square shank.

This category may be available in the new MBA online store at Handles - Latching Padlocking.

There is also a good range of Handles - Latching Padlocking on the Small Parts and Bearings website.


Handles - Latching Cab Locks
Handles - Latching Cab Locks


Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.

This category may be available in the new MBA online store at Handles - Latching Cab Locks.

There is also a good range of Handles - Latching Cab Locks on the Small Parts and Bearings website.


Handles - Latching T Handle - Folding
Handles - Latching T Handle - Folding

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.

This category may be available in the new MBA online store at Handles - Latching T Handle - Folding.

There is also a good range of Handles - Latching T Handle - Folding on the Small Parts and Bearings website.


Handles - Latching T Handle - Locking
Handles - Latching T Handle - Locking

Also see combined categories:
All T Handles

90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.

This category may be available in the new MBA online store at Handles - Latching T Handle - Locking.

Related Information:

There is also a good range of Handles - Latching T Handle - Locking on the Small Parts and Bearings website.


Strikes - Toggle Latch - Steel
Strikes - Toggle Latch - Steel


Used with toggle latches series 800, 802, 803 and 806

This category may be available in the new MBA online store at Strikes - Toggle Latch - Steel.

There is also a good range of Strikes - Toggle Latch - Steel on the Small Parts and Bearings website.


Latching Handles - Outside Door - Heavy Duty
Latching Handles - Outside Door - Heavy Duty


Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing. This category may be available in the new MBA online store at Latching Handles - Outside Door - Heavy Duty.

There is also a good range of Latching Handles - Outside Door - Heavy Duty on the Small Parts and Bearings website.


Screws - Thumb - Half Turn
Screws - Thumb - Half Turn

Also see combined categories:
All Thumb Screws

This category may be available in the new MBA online store at Screws - Thumb - Half Turn.

Related Information:

There is also a good range of Screws - Thumb - Half Turn on the Small Parts and Bearings website.


Sleeves - Hex Hole - Carbon Steel
Sleeves - Hex Hole - Carbon Steel

Also see combined categories:
All Hex Hole Sleeves

Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

This category may be available in the new MBA online store at Sleeves - Hex Hole - Carbon Steel.

There is also a good range of Sleeves - Hex Hole - Carbon Steel on the Small Parts and Bearings website.


Knobs - Three Lobe Male - Safety
Knobs - Three Lobe Male - Safety

Also see combined categories:
All Lobe Knobs
All Knobs

Knob only turns when pressed downwards and turned simultaneously to avoid involuntary turning. Also see star knobs

This category may be available in the new MBA online store at Knobs - Three Lobe Male - Safety.

Related Information:

There is also a good range of Knobs - Three Lobe Male - Safety on the Small Parts and Bearings website.


Sleeves - Hex Hole - Hardened
Sleeves - Hex Hole - Hardened

Also see combined categories:
All Hex Hole Sleeves

Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

This category may be available in the new MBA online store at Sleeves - Hex Hole - Hardened.

There is also a good range of Sleeves - Hex Hole - Hardened on the Small Parts and Bearings website.


Bearings - One Way Sprag - Standard
Bearings - One Way Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:

There is also a good range of Bearings - One Way Sprag - Standard on the Small Parts and Bearings website.


Switches - Rocker
Switches - Rocker

Also see combined categories:
All Switches

20mm Diameter mounting hole 12V/10amp. On/Off Round Switches with Housing. Illuminates when turned to on position.

Switchs are rated at 10amp @ 600VAC with finger safe screw terminals. This category may be available in the new MBA online store at Switches - Rocker.

There is also a good range of Switches - Rocker on the Small Parts and Bearings website.


Spiral Rings - External - Light Duty - Carbon Steel
Spiral Rings - External - Light Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

Includes series CE / VS / US - Spring Steel

Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.

There is also a good range of Spiral Rings - External - Light Duty - Carbon Steel on the Small Parts and Bearings website.


Spiral Rings - External - Light Duty - Stainless Steel
Spiral Rings - External - Light Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

Includes series CE / VS / US - Stainless Steel.

Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.

There is also a good range of Spiral Rings - External - Light Duty - Stainless Steel on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking
Inserts - Thread Repair - Keylocking

Also see combined categories:
All Keylocking Inserts and Kits

Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.

Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.

Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking on the Small Parts and Bearings website.


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc. This category may be available in the new MBA online store at Rod - Drill Blanks.

There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.


Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Round Handle - Steel on the Small Parts and Bearings website.


Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Tee Handle - Steel on the Small Parts and Bearings website.


Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Round Handle - Stainless Steel on the Small Parts and Bearings website.


Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Tee Handle - Stainless Steel on the Small Parts and Bearings website.


Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Round Handle - Aluminium and Steel on the Small Parts and Bearings website.


Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Tee Handle - Aluminium and Steel on the Small Parts and Bearings website.


Motors - DC 6mm Diameter
Motors - DC 6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:

There is also a good range of Motors - DC 6mm Diameter on the Small Parts and Bearings website.


Bearings - Ball Thrust Grooved - Chrome Steel
Bearings - Ball Thrust Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Grooved - Chrome Steel.

Related Information:

There is also a good range of Bearings - Ball Thrust Grooved - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball Thrust Grooved - Stainless Steel
Bearings - Ball Thrust Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Grooved - Stainless Steel.

Related Information:

There is also a good range of Bearings - Ball Thrust Grooved - Stainless Steel on the Small Parts and Bearings website.


Rollers - Solid - Stud Mount - Coloured Urethane
Rollers - Solid - Stud Mount - Coloured Urethane

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Coloured Urethane.

There is also a good range of Rollers - Solid - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.


Bearings - Ball Thrust Flat - Chrome Steel
Bearings - Ball Thrust Flat - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Flat - Chrome Steel.

Related Information:

There is also a good range of Bearings - Ball Thrust Flat - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball Thrust Flat - Stainless Steel
Bearings - Ball Thrust Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Flat - Stainless Steel.

Related Information:

There is also a good range of Bearings - Ball Thrust Flat - Stainless Steel on the Small Parts and Bearings website.


Dual Vee - Adaptor Bushings
Dual Vee - Adaptor Bushings


Vee grooved track roller bushings.

Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned. This category may be available in the new MBA online store at Dual Vee - Adaptor Bushings.

Related Information:

There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.


Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided. This category may be available in the new MBA online store at Plungers - Indexing - Cam Action - With Hex Nut.

Related Information:

There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.


Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided. This category may be available in the new MBA online store at Plungers - Indexing - Cam Action - Without Hex Nut.

Related Information:

There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.


Bearings - Ball Thrust Grooved - ZRO2 Ceramic
Bearings - Ball Thrust Grooved - ZRO2 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Grooved - ZRO2 Ceramic.

Related Information:

There is also a good range of Bearings - Ball Thrust Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.


Spiral Rings - External - Medium-Heavy Duty - Carbon Steel
Spiral Rings - External - Medium-Heavy Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AME / WST / RST - Spring Steel

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Carbon Steel.

There is also a good range of Spiral Rings - External - Medium-Heavy Duty - Carbon Steel on the Small Parts and Bearings website.


Spiral Rings - External - Medium-Heavy Duty - Stainless Steel
Spiral Rings - External - Medium-Heavy Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AME / WST / RST - Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Stainless Steel.

There is also a good range of Spiral Rings - External - Medium-Heavy Duty - Stainless Steel on the Small Parts and Bearings website.


Mounts - Levelling Studded - Elastomer Base - OSHA Yellow
Mounts - Levelling Studded - Elastomer Base - OSHA Yellow

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.

Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load. OSHA Yellow Steel Cover over elastomer base.

There is also a good range of Mounts - Levelling Studded - Elastomer Base - OSHA Yellow on the Small Parts and Bearings website.


Rollers - Solid - Shaft Mount - Coloured Urethane
Rollers - Solid - Shaft Mount - Coloured Urethane

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Solid - Shaft Mount - Coloured Urethane.

There is also a good range of Rollers - Solid - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.


Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel
Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Carbon Steel Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel.

There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel on the Small Parts and Bearings website.


Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel
Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Stainless Steel Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel.

There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel on the Small Parts and Bearings website.


Nuts - Quick Release
Nuts - Quick Release

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning. This category may be available in the new MBA online store at Nuts - Quick Release.

There is also a good range of Nuts - Quick Release on the Small Parts and Bearings website.


Knobs - Thumb For Hex Head Screw
Knobs - Thumb For Hex Head Screw

Also see combined categories:
All Thumb Knobs
All Knobs

These plastic knobs fit hex head bolts or set screws, not socket cap screws.

To fit Hex Head bolts or Set Screws Screws (Not included). Screw secured in hex recess inside the knob with a twist turn plastic cap. Made From Plastic. This category may be available in the new MBA online store at Knobs - Thumb For Hex Head Screw.

Related Information:

There is also a good range of Knobs - Thumb For Hex Head Screw on the Small Parts and Bearings website.


Rollers - Solid - Bonded to Steel Insert - Coloured Urethane
Rollers - Solid - Bonded to Steel Insert - Coloured Urethane

Also see combined categories:
All Solid Rollers with Insert

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Solid - Bonded to Steel Insert - Coloured Urethane.

There is also a good range of Rollers - Solid - Bonded to Steel Insert - Coloured Urethane on the Small Parts and Bearings website.


Turntable - Lockable
Turntable - Lockable


Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.

Similar to lazy susans but heavy duty. This category may be available in the new MBA online store at Turntable - Lockable.

Related Information:

There is also a good range of Turntable - Lockable on the Small Parts and Bearings website.


Turntable - Non-Lockable
Turntable - Non-Lockable


Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.

Similar to lazy susans but heavy duty. This category may be available in the new MBA online store at Turntable - Non-Lockable.

Related Information:

There is also a good range of Turntable - Non-Lockable on the Small Parts and Bearings website.


Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods. This category may be available in the new MBA online store at Cross Blocks - Heavy Duty - One Knob One Nut.

There is also a good range of Cross Blocks - Heavy Duty - One Knob One Nut on the Small Parts and Bearings website.


Rollers - Durasoft - Shaft Mount - Coloured Urethane
Rollers - Durasoft - Shaft Mount - Coloured Urethane

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - Coloured Urethane.

There is also a good range of Rollers - Durasoft - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.


Rollers - Durasoft - Stud Mount - Coloured Urethane
Rollers - Durasoft - Stud Mount - Coloured Urethane

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Coloured Urethane.

There is also a good range of Rollers - Durasoft - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.


Rollers - Durasoft - Shaft Mount - With Ball Bearing
Rollers - Durasoft - Shaft Mount - With Ball Bearing

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - With Ball Bearing.

There is also a good range of Rollers - Durasoft - Shaft Mount - With Ball Bearing on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.