Latches Quarter Turn Categories
Latches - 1-4 Turn - Simple
With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.
The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. This category may be available in the new MBA online store at Latches - 1-4 Turn - Simple.
There is also a good range of Latches - 1-4 Turn - Simple on the Small Parts and Bearings website.
Latches - 110 Series - Adjustable Grip
Ultimate strength 145kg. Working strength 120kg.
Strike needs to be ordered separately. This category may be available in the new MBA online store at Latches - 110 Series - Adjustable Grip.
There is also a good range of Latches - 110 Series - Adjustable Grip on the Small Parts and Bearings website.
Handles - Tee
Zinc plated steel 7.94mm (5/16in.) square shank.
This category may be available in the new MBA online store at Handles - Tee.
There is also a good range of Handles - Tee on the Small Parts and Bearings website.
Handles - Latching - Padlocking
Zinc finished iron/steel construction. Has 5/16in. Square shank.
This category may be available in the new MBA online store at Handles - Latching - Padlocking.
There is also a good range of Handles - Latching - Padlocking on the Small Parts and Bearings website.
Handles - Latching - Cab Locks
Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.
This category may be available in the new MBA online store at Handles - Latching - Cab Locks.
There is also a good range of Handles - Latching - Cab Locks on the Small Parts and Bearings website.
Strikes - Toggle Latch - Steel
Used with toggle latches series 800, 802, 803 and 806
This category may be available in the new MBA online store at Strikes - Toggle Latch - Steel.
There is also a good range of Strikes - Toggle Latch - Steel on the Small Parts and Bearings website.
Handles - Latching - T-Handle - Folding
Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.
This category may be available in the new MBA online store at Handles - Latching - T-Handle - Folding.
There is also a good range of Handles - Latching - T-Handle - Folding on the Small Parts and Bearings website.
Handles - Latching - T-Handle - Locking
90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.
This category may be available in the new MBA online store at Handles - Latching - T-Handle - Locking.
Related Information:
There is also a good range of Handles - Latching - T-Handle - Locking on the Small Parts and Bearings website.
Latching Handles - Outside Door - Heavy Duty
Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing. This category may be available in the new MBA online store at Latching Handles - Outside Door - Heavy Duty.
There is also a good range of Latching Handles - Outside Door - Heavy Duty on the Small Parts and Bearings website.
Screws - Thumb - Half Turn
This category may be available in the new MBA online store at Screws - Thumb - Half Turn.
Related Information:
There is also a good range of Screws - Thumb - Half Turn on the Small Parts and Bearings website.
Sleeves - Hex Hole - Carbon Steel
Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.
This category may be available in the new MBA online store at Sleeves - Hex Hole - Carbon Steel.
There is also a good range of Sleeves - Hex Hole - Carbon Steel on the Small Parts and Bearings website.
Knobs - Three Lobe - Safety - Male
Knob only turns when pressed downwards and turned simultaneously to avoid involuntary turning. Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe - Safety - Male.
Related Information:
There is also a good range of Knobs - Three Lobe - Safety - Male on the Small Parts and Bearings website.
Sleeves - Hex Hole - Hardened
Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.
This category may be available in the new MBA online store at Sleeves - Hex Hole - Hardened.
There is also a good range of Sleeves - Hex Hole - Hardened on the Small Parts and Bearings website.
Pulleys - Blocks - Eye - Swivel
Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.
Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed. This category may be available in the new MBA online store at Pulleys - Blocks - Eye - Swivel.
There is also a good range of Pulleys - Blocks - Eye - Swivel on the Small Parts and Bearings website.
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.
Related Information:
There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.
Switches - Rocker
20mm Diameter mounting hole 12V/10amp. On/Off Round Switches with Housing. Illuminates when turned to on position.
Switchs are rated at 10amp @ 600VAC with finger safe screw terminals. This category may be available in the new MBA online store at Switches - Rocker.
There is also a good range of Switches - Rocker on the Small Parts and Bearings website.
Spiral Rings - External - Light Duty - Carbon Steel
Includes series CE / VS / US - Spring Steel
Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.
There is also a good range of Spiral Rings - External - Light Duty - Carbon Steel on the Small Parts and Bearings website.
Spiral Rings - External - Light Duty - Stainless Steel
Includes series CE / VS / US - Stainless Steel.
Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.
There is also a good range of Spiral Rings - External - Light Duty - Stainless Steel on the Small Parts and Bearings website.
Inserts - Thread Repair - Keylocking
Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.
Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.
Related Information:
There is also a good range of Inserts - Thread Repair - Keylocking on the Small Parts and Bearings website.
Rod - Drill Blanks
Made of hardened high speed steel.
Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc. This category may be available in the new MBA online store at Rod - Drill Blanks.
There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.
Pins - Pull - Round Handle - Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.
Related Information:
There is also a good range of Pins - Pull - Round Handle - Steel on the Small Parts and Bearings website.
Pins - Pull - Tee Handle - Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.
Related Information:
There is also a good range of Pins - Pull - Tee Handle - Steel on the Small Parts and Bearings website.
Pins - Pull - Round Handle - Stainless Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.
Related Information:
There is also a good range of Pins - Pull - Round Handle - Stainless Steel on the Small Parts and Bearings website.
Pins - Pull - Tee Handle - Stainless Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.
Related Information:
There is also a good range of Pins - Pull - Tee Handle - Stainless Steel on the Small Parts and Bearings website.
Pins - Pull - Round Handle - Aluminium and Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.
Related Information:
There is also a good range of Pins - Pull - Round Handle - Aluminium and Steel on the Small Parts and Bearings website.
Pins - Pull - Tee Handle - Aluminium and Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.
Related Information:
There is also a good range of Pins - Pull - Tee Handle - Aluminium and Steel on the Small Parts and Bearings website.
Motors - DC 6mm Diameter
Our smallest motors at an affordable price.
Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.
Related Information:
There is also a good range of Motors - DC 6mm Diameter on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Chrome Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - Chrome Steel.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Stainless Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - Stainless Steel.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.
Rollers - Solid - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Coloured Urethane.
There is also a good range of Rollers - Solid - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Chrome Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Flat - Chrome Steel.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Stainless Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Flat - Stainless Steel.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Small Parts and Bearings website.
Dual Vee - Adaptor Bushings
Vee grooved track roller bushings.
Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned. This category may be available in the new MBA online store at Dual Vee - Adaptor Bushings.
Related Information:
There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - With Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided. This category may be available in the new MBA online store at Plungers - Indexing - Cam Action - With Hex Nut.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - Without Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided. This category may be available in the new MBA online store at Plungers - Indexing - Cam Action - Without Hex Nut.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.
Spiral Rings - External - Medium-Heavy Duty - Carbon Steel
AME / WST / RST - Spring Steel
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Carbon Steel.
There is also a good range of Spiral Rings - External - Medium-Heavy Duty - Carbon Steel on the Small Parts and Bearings website.
Spiral Rings - External - Medium-Heavy Duty - Stainless Steel
AME / WST / RST - Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Stainless Steel.
There is also a good range of Spiral Rings - External - Medium-Heavy Duty - Stainless Steel on the Small Parts and Bearings website.
Mounts - Leveling - Studded - Elastomer Base - OSHA Yellow
Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.
Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load. OSHA Yellow Steel Cover over elastomer base.
There is also a good range of Mounts - Leveling - Studded - Elastomer Base - OSHA Yellow on the Small Parts and Bearings website.
Rollers - Solid - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Solid - Shaft Mount - Coloured Urethane.
There is also a good range of Rollers - Solid - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel
Includes Series AMI / WHT / Spirolox RRT - Spring Steel
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel.
There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel on the Small Parts and Bearings website.
Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel
Includes Series AMI / WHT / Spirolox RRT - Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel.
There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel on the Small Parts and Bearings website.
Nuts - Quick Release
UNC
Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning. This category may be available in the new MBA online store at Nuts - Quick Release.
There is also a good range of Nuts - Quick Release on the Small Parts and Bearings website.
Rollers - Solid - Bonded to Steel Insert - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Solid - Bonded to Steel Insert - Coloured Urethane.
There is also a good range of Rollers - Solid - Bonded to Steel Insert - Coloured Urethane on the Small Parts and Bearings website.
Turntable - Lockable
Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.
Similar to lazy susans but heavy duty. This category may be available in the new MBA online store at Turntable - Lockable.
Related Information:
There is also a good range of Turntable - Lockable on the Small Parts and Bearings website.
Turntable - Non-Lockable
Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.
Similar to lazy susans but heavy duty. This category may be available in the new MBA online store at Turntable - Non-Lockable.
Related Information:
There is also a good range of Turntable - Non-Lockable on the Small Parts and Bearings website.
Cross Blocks - Heavy Duty - One Knob One Nut
Used for connecting two round rods at 90o.
Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods. This category may be available in the new MBA online store at Cross Blocks - Heavy Duty - One Knob One Nut.
There is also a good range of Cross Blocks - Heavy Duty - One Knob One Nut on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - Coloured Urethane.
There is also a good range of Rollers - Durasoft - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Durasoft - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Coloured Urethane.
There is also a good range of Rollers - Durasoft - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - With Ball Bearing
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - With Ball Bearing.
There is also a good range of Rollers - Durasoft - Shaft Mount - With Ball Bearing on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Catalogue
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Charity
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
McMaster Carr Cross Reference PDF
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 209441 products in 2115 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
