Latches Other Categories
Handles - Tee
Zinc plated steel 7.94mm (5/16in.) square shank.
There is also a good range of Handles - Tee on the Small Parts and Bearings website.
Latches - 110 Series - Adjustable Grip
Ultimate strength 145kg. Working strength 120kg.
Strike needs to be ordered separately.
There is also a good range of Latches - 110 Series - Adjustable Grip on the Small Parts and Bearings website.
Latches - 200 Series - Heavy Duty
Ultimate strength 660kg. Working strength 265kg.
Heavy Duty.
There is also a good range of Latches - 200 Series - Heavy Duty on the Small Parts and Bearings website.
Strikes - Toggle Latch - Steel
Used with toggle latches series 800, 802, 803 and 806
There is also a good range of Strikes - Toggle Latch - Steel on the Small Parts and Bearings website.
Latching Handles - Outside Door - Heavy Duty
Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.
There is also a good range of Latching Handles - Outside Door - Heavy Duty on the Small Parts and Bearings website.
Latches - 1-4 Turn - Simple
With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.
The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.
There is also a good range of Latches - 1-4 Turn - Simple on the Small Parts and Bearings website.
Latches - 1-4 Turn -Tee Handle - Non Locking
Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.
Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.
There is also a good range of Latches - 1-4 Turn -Tee Handle - Non Locking on the Small Parts and Bearings website.
Latches - Compression - Lift and Turn - Straight Handle
Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.
Comes with mounting hardware. Max working load 44kg. M5 mounting screws supplied. For panels thicker than 6.35mm a longer screw and lockwasher combination will be required.
There is also a good range of Latches - Compression - Lift and Turn - Straight Handle on the Small Parts and Bearings website.
Latches - Draw - Over Centre - 300 Grade Stainless Steel
Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.
Keepers included. Type SC-97533 has a hole for a padlock.
There is also a good range of Latches - Draw - Over Centre - 300 Grade Stainless Steel on the Small Parts and Bearings website.
Latches - Draw - T-Handle - Stainless Steel
Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.
There is also a good range of Latches - Draw - T-Handle - Stainless Steel on the Small Parts and Bearings website.
Latches - Rotary Action - Link Lock - Keepers
Required for link lock rotary action latches. Match keeper with correct latch from selection.
There is also a good range of Latches - Rotary Action - Link Lock - Keepers on the Small Parts and Bearings website.
Latches - Rotary Action - Link Lock - Rivetted - Stainless
Lift and rotate wing to operate.
Keepers not included and must be purchased separately.
Related Information:
There is also a good range of Latches - Rotary Action - Link Lock - Rivetted - Stainless on the Small Parts and Bearings website.
Latches - Slam Action - Slide
Fast snap in installation. Made from non-corrosive materials, black ABS plastic and stainless steel spring. Push to close latching.
There is also a good range of Latches - Slam Action - Slide on the Small Parts and Bearings website.
Handles - Latching - Padlocking
Zinc finished iron/steel construction. Has 5/16in. Square shank.
There is also a good range of Handles - Latching - Padlocking on the Small Parts and Bearings website.
Handles - Latching - Cab Locks
Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.
There is also a good range of Handles - Latching - Cab Locks on the Small Parts and Bearings website.
Handles - Latching - L-Handle - Locking
Chrome finished zinc die-cast construction. 360o handle rotation. Comes with gasket. All locks are keyed alike. Keys included. May be used with rod kit for 2 point locking.
Related Information:
There is also a good range of Handles - Latching - L-Handle - Locking on the Small Parts and Bearings website.
Handles - Latching - T-Handle - Folding
Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.
There is also a good range of Handles - Latching - T-Handle - Folding on the Small Parts and Bearings website.
Handles - Latching - T-Handle - Locking
90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.
Related Information:
There is also a good range of Handles - Latching - T-Handle - Locking on the Small Parts and Bearings website.
Handles - Latching - 2-Point Locking Rod Kit
Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.
There is also a good range of Handles - Latching - 2-Point Locking Rod Kit on the Small Parts and Bearings website.
Couplings - BoWex - Junior
Nylon 2 piece and 3 piece couplings. 5 to 24 Nm. 6000 rpm max.
Approved distribution through the Australian Wholesaler (Deanquip). Crowned gear teeth - No need for lubrication. Chemical resistant nylon. Electrically insulated. Grub Screw opposite Keyway.
Related Information:
There is also a good range of Couplings - BoWex - Junior on the Small Parts and Bearings website.
Couplings - Neo-Flex
0.71 to 1.27 Nm.
303 stainless steel with 73 durometer neoprene centre. Shaft to shaft insulation. Torsional vibration isolation. Ribbed style are more flexible than smooth style. Bore Tolerances: +0.025 / -0.000.
Related Information:
There is also a good range of Couplings - Neo-Flex on the Small Parts and Bearings website.
Couplings - Crowned Tooth Gear - Hubs Only
Match with sleeves from the sleeves category
+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.
Related Information:
There is also a good range of Couplings - Crowned Tooth Gear - Hubs Only on the Small Parts and Bearings website.
Couplings - Crowned Tooth Gear - Sleeve Only
Match with hubs from the hubs category
+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.
Related Information:
There is also a good range of Couplings - Crowned Tooth Gear - Sleeve Only on the Small Parts and Bearings website.
Books - Engineering
Machinery handbook contains standards, materials and other general engineering information.
Engineers Black Book, Fasteners Black Book, Machinery Handbook, Shop Reference.
There is also a good range of Books - Engineering on the Small Parts and Bearings website.
Bungs - Rectangular
Plastic bungs fit inside rectangular tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Rectangular on the Small Parts and Bearings website.
Bungs - Round
Plastic bungs fit inside round tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Round on the Small Parts and Bearings website.
Bungs - Square
Plastic bungs fit inside square tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Square on the Small Parts and Bearings website.
Nuts - Aerotight
Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.
There is also a good range of Nuts - Aerotight on the Small Parts and Bearings website.
Tips - Round
Plastic tips fit over outside of tubing.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.
There is also a good range of Tips - Round on the Small Parts and Bearings website.
Wheels - Robotic - Motorised
Motorised wheels for robotic and other applications
See also tracks for robotic applications.
There is also a good range of Wheels - Robotic - Motorised on the Small Parts and Bearings website.
Screws - Button - Socket - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Cap - Socket - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Low Head - Socket - 316L Stainless
316L Stainless Steel. Other sizes available on request.
Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles.
There is also a good range of Screws - Low Head - Socket - 316L Stainless on the Small Parts and Bearings website.
Dubro Accessories Listed by Description
Accessories for model airplanes and other hobbies.
Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.
There is also a good range of Dubro Accessories Listed by Description on the Small Parts and Bearings website.
Connectors - Edge - Kite
Edge connectors for kite rods and tubes. Can be used for other applications requiring an angled join of rod or tubing. Not a precision item.
Joiners and connectors suitable for rod and tubing as well as for kites.
There is also a good range of Connectors - Edge - Kite on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Steel
Nylon Insert for Locking. NylocTM and other brands.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon Insert - Steel on the Small Parts and Bearings website.
Washers - Bevel
For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.
Malleable iron with black finish.
There is also a good range of Washers - Bevel on the Small Parts and Bearings website.
Turntable - Lockable
Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.
Similar to lazy susans but heavy duty.
Related Information:
There is also a good range of Turntable - Lockable on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nylon Insert for Locking. NylocTM and other brands.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon Insert - Stainless Steel on the Small Parts and Bearings website.
Tips - For Kite Rods
Plastic tips fit over outside of rods and tubes for kites and other uses.
Joiners and connectors suitable for rod and tubing as well as for kites.
There is also a good range of Tips - For Kite Rods on the Small Parts and Bearings website.
Turntable - Non-Lockable
Heavy duty turntables are ideal for swivel displays, welding tables, industrial assemblies and many other applications.
Similar to lazy susans but heavy duty.
Related Information:
There is also a good range of Turntable - Non-Lockable on the Small Parts and Bearings website.
Bearings for Pool Equipment
Acetal bearings for spa jets and pool vacuum wheels
No lubrication required other than the water they are running in.
Related Information:
There is also a good range of Bearings for Pool Equipment on the Small Parts and Bearings website.
Shims - Slotted - Imperial Sizes
Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.
There is also a good range of Shims - Slotted - Imperial Sizes on the Small Parts and Bearings website.
Bushings - QD
Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing
Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley.
Related Information:
There is also a good range of Bushings - QD on the Small Parts and Bearings website.
RC Spare Parts - Hobby Pro
Hobby Pro spare parts listed by description. Suits Mutilator, Matador, H5 and H6 and other 1/5th Scale Petrol Cars
There is also a good range of RC Spare Parts - Hobby Pro on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Chrome Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Stainless Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.
Lanyards - Nylon
One piece moulded retainer designed for light duty retention.
Customer assembled loop is designed to be used with press lock rivets or other fasteners. Nylon 6/6 in UV stabilised black.
There is also a good range of Lanyards - Nylon on the Small Parts and Bearings website.
Bushings - Snap - Open
Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.
Also called a dome plug. Also see grommets for a similar product made from rubber.
Related Information:
There is also a good range of Bushings - Snap - Open on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Chrome Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125387 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
