Miniature Bearings Australia Pty Ltd

ISO PADS CATEGORIES


Isolators


Mounts - Vibration - Isolation Pads - Compression Shear
Mounts - Vibration - Isolation Pads - Compression Shear

Also see combined categories:
All Isolation Pad Mounts

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.

There is also a good range of Mounts - Vibration - Isolation Pads - Compression Shear on the Small Parts and Bearings website.


Mounts - Vibration - Isolation Pads - General Purpose
Mounts - Vibration - Isolation Pads - General Purpose

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.

There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.


Mounts Machinery


Mounts - Neoprene Pads - Ribbed Pattern
Mounts - Neoprene Pads - Ribbed Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.

There is also a good range of Mounts - Neoprene Pads - Ribbed Pattern on the Small Parts and Bearings website.


Mounts - Neoprene Pads - Waffle Pattern
Mounts - Neoprene Pads - Waffle Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Oil resistant neoprene rubber.

There is also a good range of Mounts - Neoprene Pads - Waffle Pattern on the Small Parts and Bearings website.


You may also be interested in

Mounts Wedge


Mounts - Wedge - Light Duty
Mounts - Wedge - Light Duty

Also see combined categories:
All Wedge Mounts

Used for leveling all types of production machines.

Cast iron with non skid pads on top and bottom. Excellent isolation and dampening properties. Free standing, compact, low construction height. Fine adjustments under full load. Pre-tensioned wedges for transverse stability and self locking wedges for longitudinal stability.

There is also a good range of Mounts - Wedge - Light Duty on the Small Parts and Bearings website.


Hoist Rings


Eyes - Pad - Steel
Eyes - Pad - Steel


Carbon steel suitable for welding

Not for lifting.

There is also a good range of Eyes - Pad - Steel on the Small Parts and Bearings website.


Mounts Leveling


Mounts - Leveling - Rubber Pads
Mounts - Leveling - Rubber Pads


For use with thermoplastic leveling mounts. Adjusters.


Related Information:

There is also a good range of Mounts - Leveling - Rubber Pads on the Small Parts and Bearings website.


Mounts - Leveling - Vibration Pads - Rubber
Mounts - Leveling - Vibration Pads - Rubber


Use with nyon leveling bases to provide extra grip. Adjusters.


Related Information:

There is also a good range of Mounts - Leveling - Vibration Pads - Rubber on the Small Parts and Bearings website.


Mounts - Leveling - Steel - Industrial - With Elastomer Pad
Mounts - Leveling - Steel - Industrial - With Elastomer Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.

Clear zinc plated steel. Elastomer pad for non skid applications.

There is also a good range of Mounts - Leveling - Steel - Industrial - With Elastomer Pad on the Small Parts and Bearings website.


Mounts - Leveling - Steel - Industrial - With Nylon Pad
Mounts - Leveling - Steel - Industrial - With Nylon Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.

Clear zinc plated steel. Nylon pad for glide applications.

There is also a good range of Mounts - Leveling - Steel - Industrial - With Nylon Pad on the Small Parts and Bearings website.


Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad
Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.

303 Stainless Steel. Nylon pad for glide applications.

There is also a good range of Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad on the Small Parts and Bearings website.


Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad
Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.

303 Stainless Steel. Elastomer pad for non skid applications.

There is also a good range of Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad on the Small Parts and Bearings website.


Mounts - Leveling - Padded - Light Duty - With Elastomer Pads
Mounts - Leveling - Padded - Light Duty - With Elastomer Pads

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.

For non skid applications.

There is also a good range of Mounts - Leveling - Padded - Light Duty - With Elastomer Pads on the Small Parts and Bearings website.


Mounts - Leveling - Padded - Light Duty - With Nylon Pads
Mounts - Leveling - Padded - Light Duty - With Nylon Pads

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.

For glide applications.

There is also a good range of Mounts - Leveling - Padded - Light Duty - With Nylon Pads on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - 303 Stainless - With Pad
Mounts - Leveling - Socket Type - 303 Stainless - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


There is also a good range of Mounts - Leveling - Socket Type - 303 Stainless - With Pad on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - 316 Stainless - With Pad
Mounts - Leveling - Socket Type - 316 Stainless - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


There is also a good range of Mounts - Leveling - Socket Type - 316 Stainless - With Pad on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad
Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


There is also a good range of Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad
Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


There is also a good range of Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad
Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


There is also a good range of Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad
Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


There is also a good range of Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - Steel - Nickel Plated - With Pad
Mounts - Leveling - Socket Type - Steel - Nickel Plated - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


There is also a good range of Mounts - Leveling - Socket Type - Steel - Nickel Plated - With Pad on the Small Parts and Bearings website.


Pins Roll


Pins - Coiled - Plain - Heavy Duty
Pins - Coiled - Plain - Heavy Duty

Also see combined categories:
All Coiled Pins

ASME B18.8.3M / ISO 8748 Heavy Duty Spirol Pins. Coiled roll pin.


Related Information:

There is also a good range of Pins - Coiled - Plain - Heavy Duty on the Small Parts and Bearings website.


Pins - Coiled - Plain - Standard Duty
Pins - Coiled - Plain - Standard Duty

Also see combined categories:
All Coiled Pins

ASME B18.8.3M / ISO 8750 Standard Duty Spirol Pins. Coiled roll pin.


Related Information:

There is also a good range of Pins - Coiled - Plain - Standard Duty on the Small Parts and Bearings website.


Screws Countersunk


Screws - Countersunk - Socket - Steel
Screws - Countersunk - Socket - Steel

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Steel on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Steel - Zinc Plated
Screws - Countersunk - Socket - Steel - Zinc Plated

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Steel - Zinc Plated on the Small Parts and Bearings website.


Mounts Leveling


Mounts - Leveling - Import High Value - Rubber Covers
Mounts - Leveling - Import High Value - Rubber Covers


For use with stud or socket type metallic leveling mounts without pads. Adjusters.


There is also a good range of Mounts - Leveling - Import High Value - Rubber Covers on the Small Parts and Bearings website.


Screws Countersunk


Screws - Countersunk - Socket - Aluminium
Screws - Countersunk - Socket - Aluminium

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Aluminium on the Small Parts and Bearings website.


Bumpers


Bumpers - Polyurethane - Self Adhesive
Bumpers - Polyurethane - Self Adhesive


Applies quickly and easily wherever protection is needed against nicks, scratches, scuffs and slippage.

Sold per pad - see quantity per pad in data for each item.

There is also a good range of Bumpers - Polyurethane - Self Adhesive on the Small Parts and Bearings website.


Screws Countersunk


Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - 304 Stainless on the Small Parts and Bearings website.


Screws - Countersunk - Socket - 316 Stainless
Screws - Countersunk - Socket - 316 Stainless

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - 316 Stainless on the Small Parts and Bearings website.


Mounts Leveling


Mounts - Leveling - Machine - Cushioned
Mounts - Leveling - Machine - Cushioned

Also see combined categories:
All Mounting Feet

Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.

There is also a good range of Mounts - Leveling - Machine - Cushioned on the Small Parts and Bearings website.


Mounts - Leveling - Thermoplastic
Mounts - Leveling - Thermoplastic

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Economical choice for a wide range of applications. Adjusters.

Base is made from reinforced thermoplastic. Threaded stem is steel. Optional non skid rubber pads available separately.

Related Information:

There is also a good range of Mounts - Leveling - Thermoplastic on the Small Parts and Bearings website.


ISO-PADS


ISO-PAD - Sheets
ISO-PAD - Sheets

Also see combined categories:
All ISO-PADS

For shimming and mounting machinery bases to isolate vibration.

Orange in colour. Patterned and unpatterned types. Tough vinyl chloride elastomeric resin bonded to both sides of a core of monofilament fibreglass. Co-efficient of friction 0.8. Temp range -35 oC to 110 Deg C.

There is also a good range of ISO-PAD - Sheets on the Small Parts and Bearings website.


Rod Ends Stainless Steel


Rod Ends - Stainless Steel - Bronze Lined - Male
Rod Ends - Stainless Steel - Bronze Lined - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.

There is also a good range of Rod Ends - Stainless Steel - Bronze Lined - Male on the Small Parts and Bearings website.


Mounts Leveling


Mounts - Pivotal Levelers - With Stud
Mounts - Pivotal Levelers - With Stud

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.

The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. Includes stud epoxied into the base mount.

There is also a good range of Mounts - Pivotal Levelers - With Stud on the Small Parts and Bearings website.


Mounts - Pivotal Levelers - Base Without Stud
Mounts - Pivotal Levelers - Base Without Stud

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.

The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. No stud included so you can use your own custom stud.

There is also a good range of Mounts - Pivotal Levelers - Base Without Stud on the Small Parts and Bearings website.


Gears Metric Spiral Bevel


Gears - Bevel - Spiral - Module 2.5 - Steel
Gears - Bevel - Spiral - Module 2.5 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

There is also a good range of Gears - Bevel - Spiral - Module 2.5 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Spiral - Module 2 - Steel
Gears - Bevel - Spiral - Module 2 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

There is also a good range of Gears - Bevel - Spiral - Module 2 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Spiral - Module 3 - Steel
Gears - Bevel - Spiral - Module 3 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

There is also a good range of Gears - Bevel - Spiral - Module 3 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Spiral - Module 4 - Steel
Gears - Bevel - Spiral - Module 4 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

There is also a good range of Gears - Bevel - Spiral - Module 4 - Steel on the Small Parts and Bearings website.


Bumpers


Bumpers - Cylindrical - Rubber
Bumpers - Cylindrical - Rubber

Also see combined categories:
All Cylindrical Bumpers

Built in steel screw for easy instrallation. Made with abrasion resistant SBR rubber. Resistant to abrasion and oxidation. Excellent cushioning and vibration control.

Non staining, non marring polyurethane. Sold by the pad - number of bumpers per pad shown in the listings. Peel off and apply. Clear. 60-70 Shore A hardness.

There is also a good range of Bumpers - Cylindrical - Rubber on the Small Parts and Bearings website.


Bumpers - Domed - Rubber
Bumpers - Domed - Rubber


Built in steel screw for easy instrallation. Made with abrasion resistant SBR rubber. Resistant to abrasion and oxidation. Excellent cushioning and vibration control.

Non staining, non marring polyurethane. Sold by the pad - number of bumpers per pad shown in the listings. Peel off and apply. Clear. 60-70 Shore A hardness.

There is also a good range of Bumpers - Domed - Rubber on the Small Parts and Bearings website.


Mounts - Leveling - Stud Type - Black
Mounts - Leveling - Stud Type - Black

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.

Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.

There is also a good range of Mounts - Leveling - Stud Type - Black on the Small Parts and Bearings website.


Mounts - Leveling - Stud Type - Gold Chromate
Mounts - Leveling - Stud Type - Gold Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.

Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.

There is also a good range of Mounts - Leveling - Stud Type - Gold Chromate on the Small Parts and Bearings website.


Mounts - Leveling - Socket Type - With Lag Holes
Mounts - Leveling - Socket Type - With Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured. Adjusters.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.

There is also a good range of Mounts - Leveling - Socket Type - With Lag Holes on the Small Parts and Bearings website.


Mounts - Leveling - Stud Type - With Lag Holes
Mounts - Leveling - Stud Type - With Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured. Adjusters.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.

There is also a good range of Mounts - Leveling - Stud Type - With Lag Holes on the Small Parts and Bearings website.


Housings - Linear - Square
Housings - Linear - Square

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

There is also a good range of Housings - Linear - Square on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991
Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Metric Sizes to DIN7991. Used in critical aircraft structural components. UNS R56400. ISO 10642. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991 on the Small Parts and Bearings website.


Micromotor Isolite 100 and 300 Bien Air Parts
Micromotor Isolite 100 and 300 Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor Isolite 100 and 300 Bien Air Parts on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122228 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122228 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.