Hoist Rings Categories

Rings - Hoist - Heavy Duty

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360^o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.

There is also a good range of Rings - Hoist - Heavy Duty on the Small Parts and Bearings website.

Rings - Hoist - Heavy Duty - MIL-STD1365

Also see combined categories:
All Hoist Rings

Range of movement 180^o pivot and 360^o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.

There is also a good range of Rings - Hoist - Heavy Duty - MIL-STD1365 on the Small Parts and Bearings website.

Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180^o pivot and 360^o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.

There is also a good range of Rings - Hoist - Safety Engineered on the Small Parts and Bearings website.

Rings - Hoist - Side Pull - External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.

There is also a good range of Rings - Hoist - Side Pull - External Wrench Mount on the Small Parts and Bearings website.

Rings - Hoist - Side Pull - Full Swivel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.

There is also a good range of Rings - Hoist - Side Pull - Full Swivel on the Small Parts and Bearings website.

Rings - Hoist - Side Pull - Internal-External Wrench Mount

Also see combined categories:
All Hoist Rings

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.

There is also a good range of Rings - Hoist - Side Pull - Internal-External Wrench Mount on the Small Parts and Bearings website.

Rings - Hoist - Stationary - With Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180^o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

There is also a good range of Rings - Hoist - Stationary - With Screws on the Small Parts and Bearings website.

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

Installation Tools

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel on the Small Parts and Bearings website.

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

Installation Tools

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel on the Small Parts and Bearings website.

Rings - Hoist - With Ball Bearings

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360^o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

There is also a good range of Rings - Hoist - With Ball Bearings on the Small Parts and Bearings website.

Rings - Lift - Universal

For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.

There is also a good range of Rings - Lift - Universal on the Small Parts and Bearings website.

Nuts - Eye

Max load value based on a safety factor of 5 to 1

There is also a good range of Nuts - Eye on the Small Parts and Bearings website.

Washers - Bevel

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.

There is also a good range of Washers - Bevel on the Small Parts and Bearings website.

Screws - For Rings - Hoist

High tensile cap screws for use with stationary hoist rings

Related Information:

Hoist Rings without Screws

There is also a good range of Screws - For Rings - Hoist on the Small Parts and Bearings website.

Eyes - Pad - Steel

Carbon steel suitable for welding

Not for lifting.

There is also a good range of Eyes - Pad - Steel on the Small Parts and Bearings website.

Shackles - Anchor - Bolt Type

Minimum ultimate load is 6 times the working load limit

Bolt type anchor shackles supplied with thin head bolt and nut with cotter pin. Meets US Federal Specification RR - C, Type IVA, Grade A, Class 3.

There is also a good range of Shackles - Anchor - Bolt Type on the Small Parts and Bearings website.

You may also be interested in

Eyebolts

Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel

Also see combined categories:
All Eye Bolts

304 Stainless Steel

Should not be used for angular lifts greater than 45^o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45^o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Carbon Steel on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45^o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45^o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45^o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel on the Small Parts and Bearings website.

Rings - Retaining - C Type External - For Linear Bearings

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.

There is also a good range of Rings - Retaining - C Type External - For Linear Bearings on the Small Parts and Bearings website.

Rings - Retaining - PR Type Internal - For Linear Bearings

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.

There is also a good range of Rings - Retaining - PR Type Internal - For Linear Bearings on the Small Parts and Bearings website.

Rings - Split - Stainless Steel

Also see combined categories:
All Split Rings

316 stainless steel wire rings.

There is also a good range of Rings - Split - Stainless Steel on the Small Parts and Bearings website.

Rings - Split - Zinc Plated Steel

Also see combined categories:
All Split Rings

Zinc plated hard drawn steel wire rings.

There is also a good range of Rings - Split - Zinc Plated Steel on the Small Parts and Bearings website.

Rings - Crescent

Variation of an E-Clip with an open face. Also known as a C-Clip.

Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.

Related Information:

Other circlip types

There is also a good range of Rings - Crescent on the Small Parts and Bearings website.

Rings - D - Nickel Plated

Nickel plated D Rings

There is also a good range of Rings - D - Nickel Plated on the Small Parts and Bearings website.

Rings - Round - Nickel Plated

Nickel plated round rings

There is also a good range of Rings - Round - Nickel Plated on the Small Parts and Bearings website.

Rings - Tolerance

Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.

There is also a good range of Rings - Tolerance on the Small Parts and Bearings website.

Rings - Backup

Durometer 90 Nitrile Rubber back up rings.

There is also a good range of Rings - Backup on the Small Parts and Bearings website.

Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.

There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.

Spiral Rings - External - Medium Duty

Also see combined categories:
All External Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.

There is also a good range of Spiral Rings - External - Medium Duty on the Small Parts and Bearings website.

Spiral Rings - External - Medium-Heavy Duty

Also see combined categories:
All External Spiral Rings

AME / WST / RST - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST.

There is also a good range of Spiral Rings - External - Medium-Heavy Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.

There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Light Duty

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.

There is also a good range of Spiral Rings - Internal - Light Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Medium Duty

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.

There is also a good range of Spiral Rings - Internal - Medium Duty on the Small Parts and Bearings website.

Spiral Rings - Internal - Medium-Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty on the Small Parts and Bearings website.

Snap Rings - External - Basic

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment.

There is also a good range of Snap Rings - External - Basic on the Small Parts and Bearings website.

Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.

There is also a good range of Snap Rings - Internal - Basic on the Small Parts and Bearings website.

Snap Rings - Internal - Stainless Steel

Also see combined categories:
All Internal Snaprings

Internal snaprings are similar to an internal circlip without the lugs

301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.

There is also a good range of Snap Rings - Internal - Stainless Steel on the Small Parts and Bearings website.