Miniature Bearings Australia Pty Ltd

Hoist Rings Categories


Rings - Hoist - Bar-Tite -tm-
Rings - Hoist - Bar-Tite -tm-

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot, 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor minimum 5 to 1. Black oxide finish per Mil C-13924B. Certified heat treatment.

There is also a good range of Rings - Hoist - Bar-Tite -tm- on the Small Parts and Bearings website.


Rings - Hoist - Heavy Duty
Rings - Hoist - Heavy Duty

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.

There is also a good range of Rings - Hoist - Heavy Duty on the Small Parts and Bearings website.


Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.

There is also a good range of Rings - Hoist - Heavy Duty - MIL-STD1365 on the Small Parts and Bearings website.


Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.

There is also a good range of Rings - Hoist - Safety Engineered on the Small Parts and Bearings website.


Rings - Hoist - Side Pull - External Wrench Mount
Rings - Hoist - Side Pull - External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.

There is also a good range of Rings - Hoist - Side Pull - External Wrench Mount on the Small Parts and Bearings website.


Rings - Hoist - Side Pull - Full Swivel
Rings - Hoist - Side Pull - Full Swivel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.

There is also a good range of Rings - Hoist - Side Pull - Full Swivel on the Small Parts and Bearings website.


Rings - Hoist - Side Pull - Internal-External Wrench Mount
Rings - Hoist - Side Pull - Internal-External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.

There is also a good range of Rings - Hoist - Side Pull - Internal-External Wrench Mount on the Small Parts and Bearings website.


Rings - Hoist - Stationary - Without Screws
Rings - Hoist - Stationary - Without Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Related Information:

There is also a good range of Rings - Hoist - Stationary - Without Screws on the Small Parts and Bearings website.


Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

There is also a good range of Rings - Hoist - Stationary - With Screws on the Small Parts and Bearings website.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel on the Small Parts and Bearings website.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel on the Small Parts and Bearings website.


Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

There is also a good range of Rings - Hoist - With Ball Bearings on the Small Parts and Bearings website.


Rings - Lift - Universal
Rings - Lift - Universal


For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.


There is also a good range of Rings - Lift - Universal on the Small Parts and Bearings website.


Nuts - Eye
Nuts - Eye


Max load value based on a safety factor of 5 to 1


There is also a good range of Nuts - Eye on the Small Parts and Bearings website.


Washers - Bevel
Washers - Bevel


For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.

There is also a good range of Washers - Bevel on the Small Parts and Bearings website.


Screws - For Rings - Hoist
Screws - For Rings - Hoist


High tensile cap screws for use with stationary hoist rings


Related Information:

There is also a good range of Screws - For Rings - Hoist on the Small Parts and Bearings website.


Eyes - Pad - Steel
Eyes - Pad - Steel


Carbon steel suitable for welding

Not for lifting.

There is also a good range of Eyes - Pad - Steel on the Small Parts and Bearings website.


Shackles - Anchor - Bolt Type
Shackles - Anchor - Bolt Type


Minimum ultimate load is 6 times the working load limit

Bolt type anchor shackles supplied with thin head bolt and nut with cotter pin. Meets US Federal Specification RR - C, Type IVA, Grade A, Class 3.

There is also a good range of Shackles - Anchor - Bolt Type on the Small Parts and Bearings website.


You may also be interested in

Eyebolts


Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel

Also see combined categories:
All Eye Bolts

304 Stainless Steel

Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Carbon Steel on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122208 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122208 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.