Hoist Rings Categories


Category Matches

Hoist Rings

TopHide Pictures

Rings - Hoist - Bar-Tite -tm-
Rings - Hoist - Bar-Tite -tm-

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot, 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor minimum 5 to 1. Black oxide finish per Mil C-13924B. Certified heat treatment.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Bar-Tite -tm-.

Rings - Hoist - Heavy Duty
Rings - Hoist - Heavy Duty

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Heavy Duty.

Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Heavy Duty - MIL-STD1365.

Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Safety Engineered.

Rings - Hoist - Side Pull - External Wrench Mount
Rings - Hoist - Side Pull - External Wrench Mount

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Side Pull - External Wrench Mount.

Rings - Hoist - Side Pull - Full Swivel
Rings - Hoist - Side Pull - Full Swivel

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Side Pull - Full Swivel.

Rings - Hoist - Side Pull - Internal-External Wrench Mount
Rings - Hoist - Side Pull - Internal-External Wrench Mount

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Side Pull - Internal-External Wrench Mount.

Rings - Hoist - Stationary - Without Screws
Rings - Hoist - Stationary - Without Screws

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Stationary - Without Screws.

Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Stationary - With Screws.

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel.

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel.

Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Search Rating: 100%

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - With Ball Bearings.

Rings - Lift - Universal
Rings - Lift - Universal

Search Rating: 99%

For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Lift - Universal.

Nuts - Eye
Nuts - Eye

Search Rating: 99%

Max load value based on a safety factor of 5 to 1


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Eye.

Washers - Bevel
Washers - Bevel

Search Rating: 99%

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Bevel.

Screws - For Rings - Hoist
Screws - For Rings - Hoist

Search Rating: 99%

High tensile cap screws for use with stationary hoist rings

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - For Rings - Hoist.

Eyes - Pad - Steel
Eyes - Pad - Steel

Search Rating: 99%

Carbon steel suitable for welding

Not for lifting.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Eyes - Pad - Steel.

Shackles - Anchor - Bolt Type
Shackles - Anchor - Bolt Type

Search Rating: 98%

Minimum ultimate load is 6 times the working load limit

Bolt type anchor shackles supplied with thin head bolt and nut with cotter pin. Meets US Federal Specification RR - C, Type IVA, Grade A, Class 3.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shackles - Anchor - Bolt Type.

Eyebolts

TopHide Pictures

Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Eye Bolts

304 Stainless Steel

Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel.

Bolts - Eye - Full Threaded Shanks - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Carbon Steel

Search Rating: 53%

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Full Threaded Shanks - Carbon Steel.

Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Search Rating: 52%

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel.

Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Search Rating: 52%

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated.

Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Search Rating: 46%

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel.

Clamping Rings

TopHide Pictures

Rings - Retaining - C Type External - For Linear Bearings
Rings - Retaining - C Type External - For Linear Bearings

Search Rating: 30%

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Retaining - C Type External - For Linear Bearings.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120906 products in 2840 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.