Miniature Bearings Australia Pty Ltd

Hobby Servo Motors Categories


Servo Motor - Brackets
Servo Motor - Brackets

Also see combined categories:
All Servo Accessories

Brackets to suit servo motors for robotic applications

This category may be available in the new MBA online store at Servo Motor - Brackets.

You may also like to check if Hobby and Engineering Supplies list a range of Servo Motor - Brackets.


You may also be interested in

Motors Stepper


Motors - Stepper - Basic Hobby
Motors - Stepper - Basic Hobby

Also see combined categories:
All Stepper Motors

Small light weight stepper motor for your hobby or light duty projects

This category may be available in the new MBA online store at Motors - Stepper - Basic Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Motors - Stepper - Basic Hobby.


Leads and Connectors


Leads - Hobby
Leads - Hobby


Adaptor leads for batteries, battery chargers, servos and receivers including Tamiya, Deans and Losi plugs.

Includes Deans and T Connectors. This category may be available in the new MBA online store at Leads - Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Leads - Hobby.


Gearmotors Basic


Gearmotors - Basic - Hobby - 12.1mm Diameter
Gearmotors - Basic - Hobby - 12.1mm Diameter

Also see combined categories:
All Basic Gearmotors

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications. This category may be available in the new MBA online store at Gearmotors - Basic - Hobby - 12.1mm Diameter.

You may also like to check if Hobby and Engineering Supplies list a range of Gearmotors - Basic - Hobby - 12.1mm Diameter.


Accessories - Hobby - Car and Buggy
Accessories - Hobby - Car and Buggy


Generic Parts. Specific model parts may also be found by typing the model number into the search box. Fail safes, aerials, heat sinks, body clips, tune pipe, clutch bell, bump start, engine break stand, engine fans, antenna tubes and tire warmers.

Includes Kyosho pull starts. This category may be available in the new MBA online store at Accessories - Hobby - Car and Buggy.

You may also like to check if Hobby and Engineering Supplies list a range of Accessories - Hobby - Car and Buggy.


Motor Bearing Many Parts
Motor Bearing Many Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

You may also like to check if Hobby and Engineering Supplies list a range of Motor Bearing Many Parts.


Motors - DC 22.4X38.0 mm
Motors - DC 22.4X38.0 mm

Also see combined categories:
All DC Motors

This category may be available in the new MBA online store at Motors - DC 22.4X38.0 mm.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Motors - DC 22.4X38.0 mm.


Motors - DC 23.8X30.6 mm
Motors - DC 23.8X30.6 mm

Also see combined categories:
All DC Motors

12 VDC - 12,300 RPM unloaded at 4.5 volts

This category may be available in the new MBA online store at Motors - DC 23.8X30.6 mm.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Motors - DC 23.8X30.6 mm.


Motors - DC 24.3X12.35 mm
Motors - DC 24.3X12.35 mm

Also see combined categories:
All DC Motors

6.0 VDC - 4,900 RPM unloaded at 4.5 volts

This category may be available in the new MBA online store at Motors - DC 24.3X12.35 mm.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Motors - DC 24.3X12.35 mm.


Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Motors - DC 6mm Diameter.


Motors - DC 8.0X10.0 mm
Motors - DC 8.0X10.0 mm

Also see combined categories:
All DC Motors

3.5V - 20500 RPM

This category may be available in the new MBA online store at Motors - DC 8.0X10.0 mm.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Motors - DC 8.0X10.0 mm.


Motors - Vibrating
Motors - Vibrating

Also see combined categories:
All Vibrating Motors

This category may be available in the new MBA online store at Motors - Vibrating.

You may also like to check if Hobby and Engineering Supplies list a range of Motors - Vibrating.


Motors - Vibrating - Pager
Motors - Vibrating - Pager

Also see combined categories:
All Vibrating Motors

Includes vibrating disc motor

This category may be available in the new MBA online store at Motors - Vibrating - Pager.

You may also like to check if Hobby and Engineering Supplies list a range of Motors - Vibrating - Pager.


Wheels - Hobby - General
Wheels - Hobby - General

Also see combined categories:
All Wheels

Includes wheels for robots and general hobby applications

Also see tracks for Robotic applications. This category may be available in the new MBA online store at Wheels - Hobby - General.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Hobby - General.


Rims - Hobby - Car 1-10 - Off Road - Front - Plastic
Rims - Hobby - Car 1-10 - Off Road - Front - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Car 1-10 - Off Road - Front - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Off Road - Front - Plastic.


Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic
Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic.


Rims - Hobby - Car 1-10 - Road and Drift - Plastic
Rims - Hobby - Car 1-10 - Road and Drift - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Car 1-10 - Road and Drift - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Road and Drift - Plastic.


Rims - Hobby - Car and Buggy 1-8 - Plastic
Rims - Hobby - Car and Buggy 1-8 - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Car and Buggy 1-8 - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car and Buggy 1-8 - Plastic.


Rims - Hobby - Monster Truck 1-10 - Plastic
Rims - Hobby - Monster Truck 1-10 - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Monster Truck 1-10 - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Monster Truck 1-10 - Plastic.


Tyres - Hobby - Car 1-10 - Drift
Tyres - Hobby - Car 1-10 - Drift

Also see combined categories:
All Tyres

This category may be available in the new MBA online store at Tyres - Hobby - Car 1-10 - Drift.

You may also like to check if Hobby and Engineering Supplies list a range of Tyres - Hobby - Car 1-10 - Drift.


Tyres - Hobby - Car 1-10 - Monster Truck
Tyres - Hobby - Car 1-10 - Monster Truck

Also see combined categories:
All Tyres

This category may be available in the new MBA online store at Tyres - Hobby - Car 1-10 - Monster Truck.

You may also like to check if Hobby and Engineering Supplies list a range of Tyres - Hobby - Car 1-10 - Monster Truck.


Tyres - Hobby - Car 1-10 - On Road
Tyres - Hobby - Car 1-10 - On Road

Also see combined categories:
All Tyres

This category may be available in the new MBA online store at Tyres - Hobby - Car 1-10 - On Road.

You may also like to check if Hobby and Engineering Supplies list a range of Tyres - Hobby - Car 1-10 - On Road.


Wheels - Hobby - Car 1-10 - Drift
Wheels - Hobby - Car 1-10 - Drift

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Drift wheels

This category may be available in the new MBA online store at Wheels - Hobby - Car 1-10 - Drift.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Hobby - Car 1-10 - Drift.


Wheels - Hobby - Car 1-10 - On Road - Complete
Wheels - Hobby - Car 1-10 - On Road - Complete

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Patterned types

This category may be available in the new MBA online store at Wheels - Hobby - Car 1-10 - On Road - Complete.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Hobby - Car 1-10 - On Road - Complete.


Wheels - Hobby - Car and Buggy 1-10 - Off Road - Complete
Wheels - Hobby - Car and Buggy 1-10 - Off Road - Complete

Also see combined categories:
All Wheels
All Car and Buggy Wheels

This category may be available in the new MBA online store at Wheels - Hobby - Car and Buggy 1-10 - Off Road - Complete.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Hobby - Car and Buggy 1-10 - Off Road - Complete.


Wheels - Hobby - Car and Buggy 1-8 - Off Road - Complete
Wheels - Hobby - Car and Buggy 1-8 - Off Road - Complete

Also see combined categories:
All Wheels
All Car and Buggy Wheels

This category may be available in the new MBA online store at Wheels - Hobby - Car and Buggy 1-8 - Off Road - Complete.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Hobby - Car and Buggy 1-8 - Off Road - Complete.


Wheels - Hobby - Plane
Wheels - Hobby - Plane

Also see combined categories:
All Wheels

Includes Dubro Range

This category may be available in the new MBA online store at Wheels - Hobby - Plane.

You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Hobby - Plane.


Accessories - Hobby - Dogbones
Accessories - Hobby - Dogbones


Dog bones for Remote Control Cars

This category may be available in the new MBA online store at Accessories - Hobby - Dogbones.

You may also like to check if Hobby and Engineering Supplies list a range of Accessories - Hobby - Dogbones.


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles. This category may be available in the new MBA online store at Spring Motor Assemblies - Open - RINO.


Spacers - Round - Hobby
Spacers - Round - Hobby

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Inexpensive nylon spacers for hobby applications

This category may be available in the new MBA online store at Spacers - Round - Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Spacers - Round - Hobby.


Shafting - Ground - Hobby - Steel
Shafting - Ground - Hobby - Steel

Also see combined categories:
All Shafting
All Steel Shafting

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Shafting - Ground - Hobby - Steel.


Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.

This category may be available in the new MBA online store at Pulleys - Geared - Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Pulleys - Geared - Hobby.


Couplings - Rigid - Hobby - Brass
Couplings - Rigid - Hobby - Brass

Also see combined categories:
All Rigid Couplings

A selection of inexpensive brass couplings for shaft sizes from 2 to 5 mm.

This category may be available in the new MBA online store at Couplings - Rigid - Hobby - Brass.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Couplings - Rigid - Hobby - Brass.


Tools - Cutting - Hobby
Tools - Cutting - Hobby

Also see combined categories:
All Tools

Knives and blades, cutting mats, saws, sidecutters

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Cutting - Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Tools - Cutting - Hobby.


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Aluminium.


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Brass.


Rod - Round - Copper
Rod - Round - Copper

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Copper.


Rod - Round - Urethane
Rod - Round - Urethane

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent. This category may be available in the new MBA online store at Rod - Round - Urethane.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Urethane.


Rod - Round - Sintered Bronze
Rod - Round - Sintered Bronze

Also see combined categories:
All Metal Rod - Round

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Related Information:


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Stainless Steel.


Micromat-Athlet Type H240B Motor Muss Parts
Micromat-Athlet Type H240B Motor Muss Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

You may also like to check if Hobby and Engineering Supplies list a range of Micromat-Athlet Type H240B Motor Muss Parts.


Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic
Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic

Also see combined categories:
All Metric Mitre Gears
All Hobby Gears

POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms. This category may be available in the new MBA online store at Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic.


Wheels - Mousetrap Vehicle Wheels
Wheels - Mousetrap Vehicle Wheels

Also see combined categories:
All Educational Projects

Wheels for mousetrap vehicles

This category may be available in the new MBA online store at Wheels - Mousetrap Vehicle Wheels.

You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Mousetrap Vehicle Wheels.


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths for general hobby applications. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Soft Metal Packs.


Gears - Crown Wheel - Module 0.5 - Hobby - Plastic
Gears - Crown Wheel - Module 0.5 - Hobby - Plastic

Also see combined categories:
All Hobby Gears

PCD = No. of Teeth x 0.500mm - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms. This category may be available in the new MBA online store at Gears - Crown Wheel - Module 0.5 - Hobby - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Gears - Crown Wheel - Module 0.5 - Hobby - Plastic.


Channel - Brass
Channel - Brass


For general hobby applications.

This category may be available in the new MBA online store at Channel - Brass.

You may also like to check if Hobby and Engineering Supplies list a range of Channel - Brass.


Park 480 E-Flite Parts
Park 480 E-Flite Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

You may also like to check if Hobby and Engineering Supplies list a range of Park 480 E-Flite Parts.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.