Hobby Gears Categories
Universal Joints Double
Universal Joints - Double Joint - Hobby
C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.
You may also like to check if Hobby and Engineering Supplies list a range of Universal Joints - Double Joint - Hobby.
Universal Joints Single
Universal Joints - Single Joint - Hobby
C45 Carbon Steel. Maximum operating angle 30 degree. Slow speed only.
You may also like to check if Hobby and Engineering Supplies list a range of Universal Joints - Single Joint - Hobby.
Tools General
Tools - Drills
Hobby drill for very small bits.
You may also like to check if Hobby and Engineering Supplies list a range of Tools - Drills.
Channel
Channel - Brass
For general hobby applications.
You may also like to check if Hobby and Engineering Supplies list a range of Channel - Brass.
Engineering and Hobby Rod
Rod - Round - Aluminium
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Aluminium.
Rod - Round - Brass
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Brass.
Rod - Round - Nylon
High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Nylon.
Rod - Round - PTFE
Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.
Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - PTFE.
Rod - Round - Urethane
Hard urethane rubber compound. Machinable.
Length +/- 3.2mm. Diameter +/- 2 percent.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Urethane.
Rod - Round - Carbon Fibre
High impact light weight carbon fibre for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Carbon Fibre.
Rod - Round - Glass Fibre
High impact light weight fibreglass for modelling and kites.
Glass fibre rod is more flexible and less brittle than carbon fibre rod.
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Glass Fibre.
Rod - Round - Polyester PETP
High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Polyester PETP.
Rod - Round - Sintered Bronze
Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.
Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.
Related Information:
Rod - Round - Stainless Steel
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Stainless Steel.
Gear Racks Flexible
Gear Racks - Flexible - Clamps
For clamping acetal flexirack.
For easy ready selected sets of rack and gear please see the HES website.
Engineering and Hobby Rod
Rod - Round - Soft Metal Packs
For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Soft Metal Packs.
Strip
Strip - Soft Metal Packs
For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
You may also like to check if Hobby and Engineering Supplies list a range of Strip - Soft Metal Packs.
Tools Bending
Tools - Wire Working
For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Tools - Wire Working.
Gears Metric Stem
Gears - Spur - Module 0.5 - Stem - Brass
Gears with integral shafts.
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Gears - Spur - Module 0.5 - Stem - Steel
Gears with integral shafts.
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Gears - Spur - Module 0.75 - Stem - Brass
Gears with integral shafts.
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Tube and Tubing
Tube - Round - Soft Metal Packs
For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Soft Metal Packs.
Tee Joints
Joints - Tee - Tubing and Rod
Inexpensive nylon joiners for hobby tubing and rod
You may also like to check if Hobby and Engineering Supplies list a range of Joints - Tee - Tubing and Rod.
Sheet Metallic
Sheet - Aluminium - T1100
Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100 grade.
Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.
You may also like to check if Hobby and Engineering Supplies list a range of Sheet - Aluminium - T1100.
Sheet - Aluminium - T7075
Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T7075 grade.
Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.
You may also like to check if Hobby and Engineering Supplies list a range of Sheet - Aluminium - T7075.
Tube and Tubing
Tube - Round - Aluminium
Hollow round tubing for general hobby applications.
For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Aluminium.
Tube - Round - Brass
Hollow round tubing for general hobby applications.
For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Brass.
Tube - Round - Copper
Hollow round tubing for general hobby applications.
For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Copper.
Tube - Square - Aluminium
Hollow square tubing for general hobby applications.
Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Tube - Square - Aluminium.
Tube - Square - Brass
Hollow square tubing for general hobby applications.
Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Tube - Square - Brass.
Gears Metric Racks
Gear Racks - Module 0.3 - Brass
20o Pressure Angle.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 0.4 - Brass
20o Pressure Angle.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 0.4 - Steel
20o Pressure Angle.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 0.5 - Brass
20o Pressure Angle.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 0.5 - Stainless
20o Pressure Angle.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 0.75 - Brass
20o Pressure Angle
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 0.8 - Brass
20o Pressure Angle.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 1 - Brass
20o Pressure Angle.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Bearings Single Row Ball
Bearings - Ball - Economy - 440C Stainless
Taiwanese or Italian Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.
Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Bearings - Ball - Economy - 440C Stainless.
Tube and Tubing
Tube - Round - Stainless Steel
Hollow round tubing for general hobby applications.
For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Stainless Steel.
Gears Metric Racks
Gear Racks - Module 0.4 - Plastic
20o Pressure Angle. Nylon
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 0.8 - Plastic
20o Pressure Angle. Nylon
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 1.25 - Plastic
20o Pressure Angle. Acetal.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gear Racks - Module 2.5 - Plastic
20o Pressure Angle. Nylon
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Gears Metric Stem
Gears - Spur - Module 0.8 - Stem - Steel
Gears with integral shafts. Carbon steel.
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Gears - Spur - Module 1.5 - Stem - Steel
Gears with integral shafts. Carbon steel.
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Gears - Spur - Module 1 - Stem - Steel
Gears with integral shafts. Carbon steel.
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Gears - Spur - Module 2.5 - Stem - Steel
Gears with integral shafts. Carbon steel
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Gears - Spur - Module 2 - Stem - Steel
Gears with integral shafts. Carbon steel.
Metallic. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
Gears Metric Racks
Gear Racks - Module 0.5 - Steel
20o Pressure Angle. Carbon steel.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 122538 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
