Gears Metric Helical Categories


Category Matches

Gears Metric Helical

TopHide Pictures

Gears - Helical - Module 1.5 - Steel
Gears - Helical - Module 1.5 - Steel

Search Rating: 100%

Also see combined categories:
All Metric Helical Gears


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Helical - Module 1.5 - Steel.

Gears - Helical - Module 1 - Steel
Gears - Helical - Module 1 - Steel

Search Rating: 100%

Also see combined categories:
All Metric Helical Gears


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Helical - Module 1 - Steel.

Gears - Helical - Module 2 - Steel
Gears - Helical - Module 2 - Steel

Search Rating: 100%

Also see combined categories:
All Metric Helical Gears


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Helical - Module 2 - Steel.

Gears Inch Helical

TopHide Pictures

Gears - Helical - 48 Pitch - Aluminium
Gears - Helical - 48 Pitch - Aluminium

Search Rating: 53%

Also see combined categories:
All Imperial Helical Gears

2024 Aluminium


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Helical - 48 Pitch - Aluminium.

Gears - Helical - 48 Pitch - Stainless
Gears - Helical - 48 Pitch - Stainless

Search Rating: 53%

Also see combined categories:
All Imperial Helical Gears

303 Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Helical - 48 Pitch - Stainless.

Pins Dowel

TopHide Pictures

Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Search Rating: 49%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Hammer Drive - Flat Head.

Gearboxes Cross Axis

TopHide Pictures

Gearboxes - Cross Axis - 104 x 63 x 63
Gearboxes - Cross Axis - 104 x  63 x  63

Search Rating: 48%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 15mm Bores. E40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 104 x 63 x 63.

Gearboxes - Cross Axis - 130 x 80 x 80
Gearboxes - Cross Axis - 130 x  80 x  80

Search Rating: 48%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 20mm Bores. E50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 130 x 80 x 80.

Gearboxes - Cross Axis - 150 x 96 x 96 A
Gearboxes - Cross Axis - 150 x  96 x  96 A

Search Rating: 48%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 150 x 96 x 96 A.

Gearboxes - Cross Axis - 52 x 34 x 34
Gearboxes - Cross Axis -  52 x  34 x  34

Search Rating: 48%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 6mm Bores. E20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel: Aluminium Bronze (CA104 / AB2). Circlips: Steel (not plated). Bearing: Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 52 x 34 x 34.

Gearboxes - Cross Axis - 78 x 48 x 48
Gearboxes - Cross Axis -  78 x  48 x  48

Search Rating: 48%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 10mm Bores. E30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 78 x 48 x 48.

Pins Dowel

TopHide Pictures

Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Hammer Drive - Round Head - Stainless Steel.

Gears Metric Bevel

TopHide Pictures

Gears - Bevel - Module 0.5 - Brass
Gears - Bevel - Module 0.5 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 0.5 - Brass.

Gears - Bevel - Module 0.5 - Plastic
Gears - Bevel - Module 0.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 0.5 - Plastic.

Gears - Bevel - Module 0.8 - Brass
Gears - Bevel - Module 0.8 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 0.8 - Brass.

Gears - Bevel - Module 0.8 - Plastic
Gears - Bevel - Module 0.8 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 0.8 - Plastic.

Gears - Bevel - Module 1.5 - Plastic
Gears - Bevel - Module 1.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 1.5 - Plastic.

Gears - Bevel - Module 1.5 - Steel
Gears - Bevel - Module 1.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 1.5 - Steel.

Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 1 - Plastic.

Gears - Bevel - Module 1 - Steel
Gears - Bevel - Module 1 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 1 - Steel.

Gears - Bevel - Module 2.5 - Plastic
Gears - Bevel - Module 2.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 2.5 - Plastic.

Gears - Bevel - Module 2.5 - Steel
Gears - Bevel - Module 2.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 2.5 - Steel.

Gears - Bevel - Module 2 - Plastic
Gears - Bevel - Module 2 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 2 - Plastic.

Gears - Bevel - Module 2 - Steel
Gears - Bevel - Module 2 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 2 - Steel.

Gears - Bevel - Module 3 - Plastic
Gears - Bevel - Module 3 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 3 - Plastic.

Gears - Bevel - Module 3 - Steel
Gears - Bevel - Module 3 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 3 - Steel.

Gears Metric Internal

TopHide Pictures

Gears - Internal - Module 0.5 - Stainless
Gears - Internal - Module 0.5 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - Module 0.5 - Stainless.

Gears - Internal - Module 0.8 - Stainless
Gears - Internal - Module 0.8 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - Module 0.8 - Stainless.

Gears - Internal - Module 1 - Stainless
Gears - Internal - Module 1 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - Module 1 - Stainless.

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.5 - Brass
Gears - Mitre - Module 0.5 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.5 - Brass.

Gears - Mitre - Module 0.5 - Plastic
Gears - Mitre - Module 0.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.5 - Plastic.

Gears - Mitre - Module 0.6 - Aluminium
Gears - Mitre - Module 0.6 - Aluminium

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.6 - Aluminium.

Gears - Mitre - Module 0.6 - Brass
Gears - Mitre - Module 0.6 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.6 - Brass.

Gears - Mitre - Module 0.6 - Stainless
Gears - Mitre - Module 0.6 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.6 - Stainless.

Gears - Mitre - Module 0.6 - Steel
Gears - Mitre - Module 0.6 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.6 - Steel.

Gears - Mitre - Module 0.8 - Brass
Gears - Mitre - Module 0.8 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.8 - Brass.

Gears - Mitre - Module 0.8 - Plastic
Gears - Mitre - Module 0.8 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.8 - Plastic.

Gears - Mitre - Module 1.5 - Aluminium
Gears - Mitre - Module 1.5 - Aluminium

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1.5 - Aluminium.

Gears - Mitre - Module 1.5 - Brass
Gears - Mitre - Module 1.5 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1.5 - Brass.

Gears - Mitre - Module 1.5 - Plastic
Gears - Mitre - Module 1.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1.5 - Plastic.

Gears - Mitre - Module 1.5 - Stainless
Gears - Mitre - Module 1.5 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1.5 - Stainless.

Gears - Mitre - Module 1.5 - Steel
Gears - Mitre - Module 1.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1.5 - Steel.

Gears - Mitre - Module 1 - Aluminium
Gears - Mitre - Module 1 - Aluminium

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1 - Aluminium.

Gears - Mitre - Module 1 - Brass
Gears - Mitre - Module 1 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1 - Brass.

Gears - Mitre - Module 1 - Plastic
Gears - Mitre - Module 1 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1 - Plastic.

Gears - Mitre - Module 1 - Stainless
Gears - Mitre - Module 1 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1 - Stainless.

Gears - Mitre - Module 1 - Steel
Gears - Mitre - Module 1 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1 - Steel.

Gears - Mitre - Module 2.5 - Plastic
Gears - Mitre - Module 2.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 2.5 - Plastic.

Gears - Mitre - Module 2.5 - Steel
Gears - Mitre - Module 2.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 2.5 - Steel.

Gears - Mitre - Module 2.75 - Steel
Gears - Mitre - Module 2.75 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 2.75 - Steel.

Gears - Mitre - Module 2 - Plastic
Gears - Mitre - Module 2 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 2 - Plastic.

Gears - Mitre - Module 2 - Steel
Gears - Mitre - Module 2 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle. Carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 2 - Steel.

Gears - Mitre - Module 3.5 - Plastic
Gears - Mitre - Module 3.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 3.5 - Plastic.

Gears - Mitre - Module 3 - Plastic
Gears - Mitre - Module 3 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 3 - Plastic.

Gears - Mitre - Module 3 - Steel
Gears - Mitre - Module 3 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 3 - Steel.

Gears Metric Racks

TopHide Pictures

Gear Racks - Module 0.3 - Brass
Gear Racks - Module 0.3 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.3 - Brass.

Gear Racks - Module 0.4 - Brass
Gear Racks - Module 0.4 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.4 - Brass.

Gear Racks - Module 0.4 - Plastic
Gear Racks - Module 0.4 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.4 - Plastic.

Gear Racks - Module 0.4 - Steel
Gear Racks - Module 0.4 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.4 - Steel.

Gear Racks - Module 0.5 - Brass
Gear Racks - Module 0.5 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Brass.

Gear Racks - Module 0.5 - Plastic
Gear Racks - Module 0.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Plastic.

Gear Racks - Module 0.5 - Stainless
Gear Racks - Module 0.5 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Stainless.

Gear Racks - Module 0.5 - Steel
Gear Racks - Module 0.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Steel.

Gear Racks - Module 0.75 - Brass
Gear Racks - Module 0.75 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.75 - Brass.

Gear Racks - Module 0.75 - Stainless
Gear Racks - Module 0.75 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.75 - Stainless.

Gear Racks - Module 0.8 - Brass
Gear Racks - Module 0.8 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Brass.

Gear Racks - Module 0.8 - Plastic
Gear Racks - Module 0.8 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Plastic.

Gear Racks - Module 0.8 - Stainless
Gear Racks - Module 0.8 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Stainless.

Gear Racks - Module 0.8 - Steel
Gear Racks - Module 0.8 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Steel.

Gear Racks - Module 1.25 - Plastic
Gear Racks - Module 1.25 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1.25 - Plastic.

Gear Racks - Module 1.5 - Plastic
Gear Racks - Module 1.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1.5 - Plastic.

Gear Racks - Module 1.5 - Steel
Gear Racks - Module 1.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1.5 - Steel.

Gear Racks - Module 1 - Brass
Gear Racks - Module 1 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1 - Brass.

Gear Racks - Module 1 - Plastic
Gear Racks - Module 1 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1 - Plastic.

Gear Racks - Module 1 - Stainless
Gear Racks - Module 1 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1 - Stainless.

Gear Racks - Module 1 - Steel
Gear Racks - Module 1 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon Steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1 - Steel.

Gear Racks - Module 2.5 - Plastic
Gear Racks - Module 2.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 2.5 - Plastic.

Gear Racks - Module 2.5 - Steel
Gear Racks - Module 2.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 2.5 - Steel.

Gear Racks - Module 2 - Plastic
Gear Racks - Module 2 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and nylon.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 2 - Plastic.

Gear Racks - Module 2 - Steel
Gear Racks - Module 2 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 2 - Steel.

Gear Racks - Module 3 - Plastic
Gear Racks - Module 3 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 3 - Plastic.

Gear Racks - Module 3 - Steel
Gear Racks - Module 3 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 3 - Steel.

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.15 - Brass
Gears - Spur - Module 0.15 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.150mm. 20o Pressure Angle.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.15 - Brass.

Gears - Spur - Module 0.4 - Brass
Gears - Spur - Module 0.4 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Brass.

Gears - Spur - Module 0.4 - Plastic
Gears - Spur - Module 0.4 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Plastic.

Gears - Spur - Module 0.4 - Stainless
Gears - Spur - Module 0.4 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Stainless.

Gears - Spur - Module 0.4 - Steel
Gears - Spur - Module 0.4 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Steel.

Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Aluminium.

Gears - Spur - Module 0.5 - Brass
Gears - Spur - Module 0.5 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Brass.

Gears - Spur - Module 0.5 - Plastic
Gears - Spur - Module 0.5 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Plastic.

Gears - Spur - Module 0.5 - Stainless
Gears - Spur - Module 0.5 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Stainless.

Gears - Spur - Module 0.5 - Steel
Gears - Spur - Module 0.5 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Steel.

Gears - Spur - Module 0.75 - Brass
Gears - Spur - Module 0.75 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.750mm. 20o Pressure Angle. Brass.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.75 - Brass.

Gears - Spur - Module 0.7 - Plastic
Gears - Spur - Module 0.7 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.700mm. 20o Pressure Angle. Acetal.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.7 - Plastic.

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Aluminium.

Gears - Spur - Module 0.8 - Brass
Gears - Spur - Module 0.8 - Brass

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Brass.

Gears - Spur - Module 0.8 - Plastic
Gears - Spur - Module 0.8 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Plastic.

Gears - Spur - Module 0.8 - Stainless
Gears - Spur - Module 0.8 - Stainless

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Stainless.

Gears - Spur - Module 0.8 - Steel
Gears - Spur - Module 0.8 - Steel

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Steel.

Gears - Spur - Module 1.25 - Plastic
Gears - Spur - Module 1.25 - Plastic

Search Rating: 47%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1.25 - Plastic.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120804 products in 2845 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.