Miniature Bearings Australia Pty Ltd

Gears Inch Worms Categories


Worm Gears - 24DP Series 1 - Plastic
Worm Gears - 24DP Series 1 - Plastic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 24DP Series 1 - Plastic.

Related Information:

There is also a good range of Worm Gears - 24DP Series 1 - Plastic on the Small Parts and Bearings website.


Worm Gears - 32DP Series 1 - Metallic
Worm Gears - 32DP Series 1 - Metallic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 32DP Series 1 - Metallic.

Related Information:

There is also a good range of Worm Gears - 32DP Series 1 - Metallic on the Small Parts and Bearings website.


Worm Gears - 32DP Series 1 - Plastic
Worm Gears - 32DP Series 1 - Plastic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 32DP Series 1 - Plastic.

Related Information:

There is also a good range of Worm Gears - 32DP Series 1 - Plastic on the Small Parts and Bearings website.


Worm Gears - 48DP Series 1 - Metallic
Worm Gears - 48DP Series 1 - Metallic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worm Gears - 48DP Series 1 - Metallic.

Related Information:

There is also a good range of Worm Gears - 48DP Series 1 - Metallic on the Small Parts and Bearings website.


Worms - 24DP Series 1 - Metallic
Worms - 24DP Series 1 - Metallic

Also see combined categories:
All Worms
All Imperial Worms

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. This category may be available in the new MBA online store at Worms - 24DP Series 1 - Metallic.

Related Information:

There is also a good range of Worms - 24DP Series 1 - Metallic on the Small Parts and Bearings website.


You may also be interested in

Gears Metric Worms


Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand
Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 6.90o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

There is also a good range of Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand on the Small Parts and Bearings website.


Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

There is also a good range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand on the Small Parts and Bearings website.


Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

There is also a good range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 110 x 95 x 38mm
Gearboxes - Cross Axis - 110 x 95 x 38mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 110 x 95 x 38mm on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 90 x 75 x 32mm
Gearboxes - Cross Axis - 90 x 75 x 32mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 90 x 75 x 32mm on the Small Parts and Bearings website.


Gears - Blanks
Gears - Blanks


Blanks for cutting gears and pulleys and friction drives.

This category may be available in the new MBA online store at Gears - Blanks.

There is also a good range of Gears - Blanks on the Small Parts and Bearings website.


Gear Racks - Flexible - Standard - Standard
Gear Racks - Flexible - Standard - Standard

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.

There is also a good range of Gear Racks - Flexible - Standard - Standard on the Small Parts and Bearings website.


Gears - Cluster - Module 0.5 - Brass
Gears - Cluster - Module 0.5 - Brass

Also see combined categories:
All Cluster Gears
All Hobby Gears

This category may be available in the new MBA online store at Gears - Cluster - Module 0.5 - Brass.

There is also a good range of Gears - Cluster - Module 0.5 - Brass on the Small Parts and Bearings website.


Gears - Bevel - 32 Diametrical Pitch - Plastic
Gears - Bevel - 32 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - 32 Diametrical Pitch - Plastic.

Related Information:

There is also a good range of Gears - Bevel - 32 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears - Mitre - 10 Diametrical Pitch Steel
Gears - Mitre - 10 Diametrical Pitch Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 10 Diametrical Pitch Steel.

There is also a good range of Gears - Mitre - 10 Diametrical Pitch Steel on the Small Parts and Bearings website.


Gears - Mitre - 12 Diametrical Pitch Steel
Gears - Mitre - 12 Diametrical Pitch Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 12 Diametrical Pitch Steel.

There is also a good range of Gears - Mitre - 12 Diametrical Pitch Steel on the Small Parts and Bearings website.


Gears - Mitre - 16 Diametrical Pitch Steel
Gears - Mitre - 16 Diametrical Pitch Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Unhardened Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 16 Diametrical Pitch Steel.

There is also a good range of Gears - Mitre - 16 Diametrical Pitch Steel on the Small Parts and Bearings website.


Gears - Mitre - 24 Diametrical Pitch Brass
Gears - Mitre - 24 Diametrical Pitch Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 24 Diametrical Pitch Brass.

Related Information:

There is also a good range of Gears - Mitre - 24 Diametrical Pitch Brass on the Small Parts and Bearings website.


Gears - Mitre - 24 Diametrical Pitch Plastic
Gears - Mitre - 24 Diametrical Pitch Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 24 Diametrical Pitch Plastic.

Related Information:

There is also a good range of Gears - Mitre - 24 Diametrical Pitch Plastic on the Small Parts and Bearings website.


Gears - Mitre - 8 Diametrical Pitch Steel
Gears - Mitre - 8 Diametrical Pitch Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 8 Diametrical Pitch Steel.

There is also a good range of Gears - Mitre - 8 Diametrical Pitch Steel on the Small Parts and Bearings website.


Gear Racks - 10DP - 14.5 PA - Steel
Gear Racks - 10DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 10 DP. Approx 7.98mm between teeth. This category may be available in the new MBA online store at Gear Racks - 10DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 10DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 12DP - Steel
Gear Racks - 12DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

12 DP. Approx 6.65mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 12DP - Steel.

There is also a good range of Gear Racks - 12DP - Steel on the Small Parts and Bearings website.


Gear Racks - 16DP - Plastic
Gear Racks - 16DP - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Plastic.

There is also a good range of Gear Racks - 16DP - Plastic on the Small Parts and Bearings website.


Gear Racks - 16DP - Steel
Gear Racks - 16DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Steel.

There is also a good range of Gear Racks - 16DP - Steel on the Small Parts and Bearings website.


Gear Racks - 20DP - 14.5 PA - Steel
Gear Racks - 20DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 20 DP. Approx 3.99mm between teeth. This category may be available in the new MBA online store at Gear Racks - 20DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 20DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 24DP - 14.5 PA - Plastic
Gear Racks - 24DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - 14.5 PA - Plastic.

There is also a good range of Gear Racks - 24DP - 14.5 PA - Plastic on the Small Parts and Bearings website.


Gear Racks - 24DP - Stainless - Standard - Standard
Gear Racks - 24DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 24DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gear Racks - 32DP - 14.5 PA - Plastic
Gear Racks - 32DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - 14.5 PA - Plastic.

There is also a good range of Gear Racks - 32DP - 14.5 PA - Plastic on the Small Parts and Bearings website.


Gear Racks - 32DP - Stainless Steel
Gear Racks - 32DP - Stainless Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - Stainless Steel.

There is also a good range of Gear Racks - 32DP - Stainless Steel on the Small Parts and Bearings website.


Gear Racks - 48DP - 14.5 PA - Plastic
Gear Racks - 48DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - 14.5 PA - Plastic.

There is also a good range of Gear Racks - 48DP - 14.5 PA - Plastic on the Small Parts and Bearings website.


Gear Racks - 48DP - Stainless - Standard - Standard
Gear Racks - 48DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 48DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gear Racks - 64DP - Stainless - Standard - Standard
Gear Racks - 64DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. This category may be available in the new MBA online store at Gear Racks - 64DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 64DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gear Racks - 6DP - 14.5 PA - Steel
Gear Racks - 6DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 6 DP. Approx 13.3mm between teeth. This category may be available in the new MBA online store at Gear Racks - 6DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 6DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 8DP - 14.5 PA - Steel
Gear Racks - 8DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 8 DP. Approx 9.98mm between teeth. This category may be available in the new MBA online store at Gear Racks - 8DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 8DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 96DP - Stainless - Side Holes
Gear Racks - 96DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 96DP - Stainless - Side Holes.

There is also a good range of Gear Racks - 96DP - Stainless - Side Holes on the Small Parts and Bearings website.


Gear Racks - 96DP - Stainless - Standard - Standard
Gear Racks - 96DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 96 DP. Approx 0.83mm between teeth. This category may be available in the new MBA online store at Gear Racks - 96DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 96DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gears - Spur - 10DP - 14.5 Degree - Steel
Gears - Spur - 10DP - 14.5 Degree - Steel

Also see combined categories:
All 10DP Spur Gears

PCD = No. of Teeth x 2.540mm (1/10 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

10 Diametrical Pitch. Approx 7.98mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 10DP - 14.5 Degree - Steel.

There is also a good range of Gears - Spur - 10DP - 14.5 Degree - Steel on the Small Parts and Bearings website.


Gears - Spur - 12DP - 14.5 Degree - Steel
Gears - Spur - 12DP - 14.5 Degree - Steel

Also see combined categories:
All 12DP Spur Gears

PCD = No. of Teeth x 2.117mm (1/12 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

12 Diametrical Pitch. Approx 6.65mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 12DP - 14.5 Degree - Steel.

There is also a good range of Gears - Spur - 12DP - 14.5 Degree - Steel on the Small Parts and Bearings website.


Gears - Spur - 16DP - 14.5 Degree - Steel
Gears - Spur - 16DP - 14.5 Degree - Steel

Also see combined categories:
All 16DP Spur Gears 14.5 Degree
All Metal 16DP Spur Gears 14.5 Degree

PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 16DP - 14.5 Degree - Steel.

There is also a good range of Gears - Spur - 16DP - 14.5 Degree - Steel on the Small Parts and Bearings website.


Gears - Spur - 16DP - 20 Degree - Plastic - Standard
Gears - Spur - 16DP - 20 Degree - Plastic - Standard

Also see combined categories:
All 16DP Spur Gears 20 Degree

PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon and acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 16DP - 20 Degree - Plastic - Standard.

There is also a good range of Gears - Spur - 16DP - 20 Degree - Plastic - Standard on the Small Parts and Bearings website.


Gears - Spur - 20DP - 14.5 Degree - Steel
Gears - Spur - 20DP - 14.5 Degree - Steel

Also see combined categories:
All 20DP Spur Gears

PCD = No. of Teeth x 1.270mm (1/20 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

20 Diametrical Pitch. Approx 3.99mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 20DP - 14.5 Degree - Steel.

There is also a good range of Gears - Spur - 20DP - 14.5 Degree - Steel on the Small Parts and Bearings website.


Gears - Spur - 24DP - 14.5 Degree - Brass
Gears - Spur - 24DP - 14.5 Degree - Brass

Also see combined categories:
All 24DP Spur Gears 14.5 Degree

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 14.5 Degree - Brass.

There is also a good range of Gears - Spur - 24DP - 14.5 Degree - Brass on the Small Parts and Bearings website.


Gears - Spur - 24DP - 14.5 Degree - Steel
Gears - Spur - 24DP - 14.5 Degree - Steel

Also see combined categories:
All 24DP Spur Gears 14.5 Degree

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Carbon Steel.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 14.5 Degree - Steel.

There is also a good range of Gears - Spur - 24DP - 14.5 Degree - Steel on the Small Parts and Bearings website.


Gears - Spur - 24DP - 20 Degree - Plastic - Plain
Gears - Spur - 24DP - 20 Degree - Plastic - Plain

Also see combined categories:
All 24DP Spur Gears 20 Degree
All 24DP Spur Gears 20 Degree Plastic

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Plastic - Plain.

There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic - Plain on the Small Parts and Bearings website.


Gears - Spur - 24DP - 20 Degree - Plastic with Insert
Gears - Spur - 24DP - 20 Degree - Plastic with Insert

Also see combined categories:
All 24DP Spur Gears 20 Degree
All 24DP Spur Gears 20 Degree Plastic

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Plastic with Insert.

There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic with Insert on the Small Parts and Bearings website.


Gears - Spur - 24DP - 20 Degree - Stainless
Gears - Spur - 24DP - 20 Degree - Stainless

Also see combined categories:
All 24DP Spur Gears 20 Degree
All 24DP Spur Gears 20 Degree Metal

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Stainless.

There is also a good range of Gears - Spur - 24DP - 20 Degree - Stainless on the Small Parts and Bearings website.


Gears - Spur - 32DP - 14.5 Degree - Brass
Gears - Spur - 32DP - 14.5 Degree - Brass

Also see combined categories:
All 32DP Spur Gears 14.5 Degree

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 32DP - 14.5 Degree - Brass.

There is also a good range of Gears - Spur - 32DP - 14.5 Degree - Brass on the Small Parts and Bearings website.


Gears - Spur - 32DP - 14.5 Degree - Plastic
Gears - Spur - 32DP - 14.5 Degree - Plastic

Also see combined categories:
All 32DP Spur Gears 14.5 Degree

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 32DP - 14.5 Degree - Plastic.

There is also a good range of Gears - Spur - 32DP - 14.5 Degree - Plastic on the Small Parts and Bearings website.


Gears - Spur - 32DP - 14.5 Degree - Steel
Gears - Spur - 32DP - 14.5 Degree - Steel

Also see combined categories:
All 32DP Spur Gears 14.5 Degree

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Carbon steel. DP stands for Diametrical Pitch and is an imperial measurement system.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 32DP - 14.5 Degree - Steel.

There is also a good range of Gears - Spur - 32DP - 14.5 Degree - Steel on the Small Parts and Bearings website.


Gears - Spur - 32DP - 20 Degree - Plastic - Standard
Gears - Spur - 32DP - 20 Degree - Plastic - Standard

Also see combined categories:
All 32DP Spur Gears 20 Degree
All 32DP Spur Gears 20 Degree Plastic

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 32DP - 20 Degree - Plastic - Standard.

There is also a good range of Gears - Spur - 32DP - 20 Degree - Plastic - Standard on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.