Gears Inch Worms Categories
Worm Gears - 24DP Series 1 - Metallic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - 24DP Series 1 - Metallic on the Small Parts and Bearings website.
Worm Gears - 24DP Series 1 - Plastic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - 24DP Series 1 - Plastic on the Small Parts and Bearings website.
Worm Gears - 32DP Series 1 - Metallic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - 32DP Series 1 - Metallic on the Small Parts and Bearings website.
Worm Gears - 32DP Series 1 - Plastic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - 32DP Series 1 - Plastic on the Small Parts and Bearings website.
Worm Gears - 32DP Series 2 - Plastic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - 32DP Series 2 - Plastic on the Small Parts and Bearings website.
Worm Gears - 48DP Series 1 - Metallic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - 48DP Series 1 - Metallic on the Small Parts and Bearings website.
Worms - 24DP Series 1 - Metallic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worms - 24DP Series 1 - Metallic on the Small Parts and Bearings website.
Worms - 32DP Series 1 - Metallic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worms - 32DP Series 1 - Metallic on the Small Parts and Bearings website.
Worms - 64DP Series 1 - Metallic
Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.
14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worms - 64DP Series 1 - Metallic on the Small Parts and Bearings website.
You may also be interested in
Gears Metric Worms
Worm Gears - Module 0.8 Series 2 - Plastic Gear and Metallic Worm
Match with metallic worms Module 0.80 Series 2.
20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - Module 0.8 Series 2 - Plastic Gear and Metallic Worm on the Small Parts and Bearings website.
Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand
Worms and Gears must be chosen from the same pitch and series to match.
20o Pressure Angle - 6.90o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand on the Small Parts and Bearings website.
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand
Worms and Gears must be chosen from the same pitch and series to match.
20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand on the Small Parts and Bearings website.
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand
Worms and Gears must be chosen from the same pitch and series to match.
20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand on the Small Parts and Bearings website.
Worms - Module 1 Series 1 - Plastic and Metallic - Right Hand
Worms and Gears must be chosen from the same pitch and series to match.
20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
Related Information:
There is also a good range of Worms - Module 1 Series 1 - Plastic and Metallic - Right Hand on the Small Parts and Bearings website.
Gearboxes - Cross Axis - 110 x 95 x 38mm
Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
Related Information:
There is also a good range of Gearboxes - Cross Axis - 110 x 95 x 38mm on the Small Parts and Bearings website.
Gearboxes - Cross Axis - 90 x 75 x 32mm
Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
Related Information:
There is also a good range of Gearboxes - Cross Axis - 90 x 75 x 32mm on the Small Parts and Bearings website.
Gears - Blanks
Blanks for cutting gears and pulleys and friction drives.
There is also a good range of Gears - Blanks on the Small Parts and Bearings website.
Gear Racks - Flexible
Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.
20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.
There is also a good range of Gear Racks - Flexible on the Small Parts and Bearings website.
Gear Racks - Flexible - Guide Rails
For mounting flexirack. Flexible nylon or rigid aluminium guide rails.
Longer lengths in Nylon available on special order. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - Flexible - Guide Rails on the Small Parts and Bearings website.
Gears - Bevel - 24 Diametrical Pitch - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 24 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Bevel - 32 Diametrical Pitch - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 32 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Bevel - 48 Diametrical Pitch - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Mitre - 10 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 10 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 12 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 12 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 16 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Unhardened Steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 16 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 24 Diametrical Pitch - Brass
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Brass on the Small Parts and Bearings website.
Gears - Mitre - 24 Diametrical Pitch - Plastic
1:1 Ratio. 20o Pressure Angle - Nylon.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Mitre - 8 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 8 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gear Racks - 10DP - 14.5 PA - Steel
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 10 DP. Approx 7.98mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 10DP - 14.5 PA - Steel on the Small Parts and Bearings website.
Gear Racks - 12DP - Steel
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
12 DP. Approx 6.65mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 12DP - Steel on the Small Parts and Bearings website.
Gear Racks - 16DP - Steel
14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.
16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 16DP - Steel on the Small Parts and Bearings website.
Gear Racks - 20DP - 14.5 PA - Steel
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 20 DP. Approx 3.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 20DP - 14.5 PA - Steel on the Small Parts and Bearings website.
Gear Racks - 48DP - 14.5 PA - Steel
14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 48DP - 14.5 PA - Steel on the Small Parts and Bearings website.
Gear Racks - 6DP - 14.5 PA - Steel
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 6 DP. Approx 13.3mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 6DP - 14.5 PA - Steel on the Small Parts and Bearings website.
Gear Racks - 8DP - 14.5 PA - Steel
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 8 DP. Approx 9.98mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 8DP - 14.5 PA - Steel on the Small Parts and Bearings website.
Gear Racks - 96DP - Stainless - Side Holes
20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.
96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - 96DP - Stainless - Side Holes on the Small Parts and Bearings website.
Gears - Spur - 10DP - 14.5 Degree - Steel
PCD = No. of Teeth x 2.540mm (1/10 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.
Metallic. 10 Diametrical Pitch. Approx 7.98mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 10DP - 14.5 Degree - Steel on the Small Parts and Bearings website.
Gears - Spur - 12DP - 14.5 Degree - Steel
PCD = No. of Teeth x 2.117mm (1/12 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.
Metallic. 12 Diametrical Pitch. Approx 6.65mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 12DP - 14.5 Degree - Steel on the Small Parts and Bearings website.
Gears - Spur - 16DP - 14.5 Degree - Steel
PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 16DP - 14.5 Degree - Steel on the Small Parts and Bearings website.
Gears - Spur - 16DP - 20 Degree - Plastic
PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon and acetal. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 16DP - 20 Degree - Plastic on the Small Parts and Bearings website.
Gears - Spur - 20DP - 14.5 Degree - Steel
PCD = No. of Teeth x 1.270mm (1/20 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.
Metallic. 20 Diametrical Pitch. Approx 3.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 20DP - 14.5 Degree - Steel on the Small Parts and Bearings website.
Gears - Spur - 24DP - 14.5 Degree - Brass
PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 24DP - 14.5 Degree - Brass on the Small Parts and Bearings website.
Gears - Spur - 24DP - 14.5 Degree - Steel
PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Carbon Steel.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 24DP - 14.5 Degree - Steel on the Small Parts and Bearings website.
Gears - Spur - 24DP - 20 Degree - Plastic - Plain
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic - Plain on the Small Parts and Bearings website.
Gears - Spur - 24DP - 20 Degree - Plastic with Insert
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic with Insert on the Small Parts and Bearings website.
Gears - Spur - 32DP - 14.5 Degree - Brass
PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 32DP - 14.5 Degree - Brass on the Small Parts and Bearings website.
Gears - Spur - 32DP - 14.5 Degree - Plastic
PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 32DP - 14.5 Degree - Plastic on the Small Parts and Bearings website.
Gears - Spur - 32DP - 14.5 Degree - Steel
PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Carbon steel. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 32DP - 14.5 Degree - Steel on the Small Parts and Bearings website.
Gears - Spur - 32DP - 20 Degree - Plastic
PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 32DP - 20 Degree - Plastic on the Small Parts and Bearings website.
Gears - Spur - 32DP - 20 Degree - Plastic with Insert
PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 32DP - 20 Degree - Plastic with Insert on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
