Miniature Bearings Australia Pty Ltd

Gears Inch Mitre Categories


Gears - Mitre - 24 Diametrical Pitch - Brass
Gears - Mitre - 24 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Mitre - 32 Diametrical Pitch - Brass
Gears - Mitre - 32 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 32 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Mitre - 48 Diametrical Pitch - Brass
Gears - Mitre - 48 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Mitre - 16 Diametrical Pitch - Plastic
Gears - Mitre - 16 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 16 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears - Mitre - 24 Diametrical Pitch - Plastic
Gears - Mitre - 24 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears - Mitre - 32 Diametrical Pitch - Plastic
Gears - Mitre - 32 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 32 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears - Mitre - 48 Diametrical Pitch - Plastic
Gears - Mitre - 48 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears - Mitre - 10 Diametrical Pitch - Steel
Gears - Mitre - 10 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 10 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 12 Diametrical Pitch - Steel
Gears - Mitre - 12 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 12 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 16 Diametrical Pitch - Steel
Gears - Mitre - 16 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Unhardened Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 16 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 20 Diametrical Pitch - Steel
Gears - Mitre - 20 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Unhardened Steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 20 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 24 Diametrical Pitch - Steel
Gears - Mitre - 24 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 32 Diametrical Pitch - Steel
Gears - Mitre - 32 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 32 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 48 Diametrical Pitch - Steel
Gears - Mitre - 48 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 8 Diametrical Pitch - Steel
Gears - Mitre -  8 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 8 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


You may also be interested in

Gears Inch Bevel


Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

There is also a good range of Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

There is also a good range of Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears Metric Spiral Bevel


Gears - Bevel - Spiral - Module 2.5 - Steel
Gears - Bevel - Spiral - Module 2.5 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

There is also a good range of Gears - Bevel - Spiral - Module 2.5 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Spiral - Module 2 - Steel
Gears - Bevel - Spiral - Module 2 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

There is also a good range of Gears - Bevel - Spiral - Module 2 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Spiral - Module 3 - Steel
Gears - Bevel - Spiral - Module 3 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

There is also a good range of Gears - Bevel - Spiral - Module 3 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Spiral - Module 4 - Steel
Gears - Bevel - Spiral - Module 4 - Steel

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

There is also a good range of Gears - Bevel - Spiral - Module 4 - Steel on the Small Parts and Bearings website.


Gears Metric Bevel


Gears - Bevel - Module 0.5 - Brass
Gears - Bevel - Module 0.5 - Brass

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.5 - Brass on the Small Parts and Bearings website.


Gears - Bevel - Module 0.8 - Brass
Gears - Bevel - Module 0.8 - Brass

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.8 - Brass on the Small Parts and Bearings website.


Gears - Bevel - Module 1.5 - Plastic
Gears - Bevel - Module 1.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1.5 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 1.5 - Steel
Gears - Bevel - Module 1.5 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1.5 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 1 - Steel
Gears - Bevel - Module 1 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 1 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 2.5 - Plastic
Gears - Bevel - Module 2.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2.5 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 2.5 - Steel
Gears - Bevel - Module 2.5 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2.5 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 2 - Plastic
Gears - Bevel - Module 2 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 2 - Steel
Gears - Bevel - Module 2 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 2 - Steel on the Small Parts and Bearings website.


Gears - Bevel - Module 3 - Plastic
Gears - Bevel - Module 3 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 3 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 3 - Steel
Gears - Bevel - Module 3 - Steel

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 3 - Steel on the Small Parts and Bearings website.


Gears Inch Bevel


Gears - Bevel - 24 Diametrical Pitch - Brass
Gears - Bevel - 24 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - 24 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Bevel - 32 Diametrical Pitch - Brass
Gears - Bevel - 32 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - 32 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Bevel - 48 Diametrical Pitch - Brass
Gears - Bevel - 48 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Bevel - 48 Diametrical Pitch - Steel
Gears - Bevel - 48 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Steel on the Small Parts and Bearings website.


Gears Metric Bevel


Gears - Bevel - Module 0.5 - Plastic
Gears - Bevel - Module 0.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.5 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - Module 0.8 - Plastic
Gears - Bevel - Module 0.8 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - Module 0.8 - Plastic on the Small Parts and Bearings website.


Gears Inch Bevel


Gears - Bevel - 24 Diametrical Pitch - Plastic
Gears - Bevel - 24 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - 24 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears - Bevel - 32 Diametrical Pitch - Plastic
Gears - Bevel - 32 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - 32 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears - Bevel - 48 Diametrical Pitch - Plastic
Gears - Bevel - 48 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Plastic on the Small Parts and Bearings website.


Gears Metric Mitre


Gears - Mitre - Module 0.5 - Brass
Gears - Mitre - Module 0.5 - Brass

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.5 - Brass on the Small Parts and Bearings website.


Gears - Mitre - Module 0.6 - Aluminium
Gears - Mitre - Module 0.6 - Aluminium

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.6 - Aluminium on the Small Parts and Bearings website.


Gears - Mitre - Module 0.6 - Brass
Gears - Mitre - Module 0.6 - Brass

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.6 - Brass on the Small Parts and Bearings website.


Gears - Mitre - Module 0.6 - Stainless
Gears - Mitre - Module 0.6 - Stainless

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - Module 0.6 - Stainless on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122228 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122228 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.