Gears Inch Mitre Categories
Gears - Mitre - 24 Diametrical Pitch - Brass
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Brass on the Small Parts and Bearings website.
Gears - Mitre - 32 Diametrical Pitch - Brass
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 32 Diametrical Pitch - Brass on the Small Parts and Bearings website.
Gears - Mitre - 48 Diametrical Pitch - Brass
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Brass on the Small Parts and Bearings website.
Gears - Mitre - 16 Diametrical Pitch - Plastic
1:1 Ratio. 20o Pressure Angle - Nylon.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 16 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Mitre - 24 Diametrical Pitch - Plastic
1:1 Ratio. 20o Pressure Angle - Nylon.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Mitre - 32 Diametrical Pitch - Plastic
1:1 Ratio. 20o Pressure Angle - Nylon
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 32 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Mitre - 48 Diametrical Pitch - Plastic
1:1 Ratio. 20o Pressure Angle - Nylon
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Mitre - 10 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 10 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 12 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 12 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 16 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Unhardened Steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 16 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 20 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Unhardened Steel.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 20 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 24 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 24 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 32 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 32 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 48 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 8 Diametrical Pitch - Steel
1:1 Ratio. 20o Pressure Angle - Carbon steel
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 8 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets
Sold as sets - 1:1 Ratio. Stainless steel and aluminium.
Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.
Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets
Sold as sets - 1:1 Ratio. Stainless steel and aluminium.
Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.
Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets
Sold as sets - 1:1 Ratio. Stainless steel and aluminium.
Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.
You may also be interested in
Gears Inch Bevel
Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets
Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.
Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.
Related Information:
There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.
Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.
Related Information:
There is also a good range of Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.
Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets
Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.
Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.
Related Information:
There is also a good range of Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.
Gears Metric Spiral Bevel
Gears - Bevel - Spiral - Module 2.5 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.
Related Information:
There is also a good range of Gears - Bevel - Spiral - Module 2.5 - Steel on the Small Parts and Bearings website.
Gears - Bevel - Spiral - Module 2 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.
Related Information:
There is also a good range of Gears - Bevel - Spiral - Module 2 - Steel on the Small Parts and Bearings website.
Gears - Bevel - Spiral - Module 3 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.
Related Information:
There is also a good range of Gears - Bevel - Spiral - Module 3 - Steel on the Small Parts and Bearings website.
Gears - Bevel - Spiral - Module 4 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.
There is also a good range of Gears - Bevel - Spiral - Module 4 - Steel on the Small Parts and Bearings website.
Gears Metric Bevel
Gears - Bevel - Module 0.5 - Brass
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 0.5 - Brass on the Small Parts and Bearings website.
Gears - Bevel - Module 0.8 - Brass
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 0.8 - Brass on the Small Parts and Bearings website.
Gears - Bevel - Module 1.5 - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 1.5 - Plastic on the Small Parts and Bearings website.
Gears - Bevel - Module 1.5 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 1.5 - Steel on the Small Parts and Bearings website.
Gears - Bevel - Module 1 - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 1 - Plastic on the Small Parts and Bearings website.
Gears - Bevel - Module 1 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 1 - Steel on the Small Parts and Bearings website.
Gears - Bevel - Module 2.5 - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 2.5 - Plastic on the Small Parts and Bearings website.
Gears - Bevel - Module 2.5 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 2.5 - Steel on the Small Parts and Bearings website.
Gears - Bevel - Module 2 - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 2 - Plastic on the Small Parts and Bearings website.
Gears - Bevel - Module 2 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 2 - Steel on the Small Parts and Bearings website.
Gears - Bevel - Module 3 - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 3 - Plastic on the Small Parts and Bearings website.
Gears - Bevel - Module 3 - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 3 - Steel on the Small Parts and Bearings website.
Gears Inch Bevel
Gears - Bevel - 24 Diametrical Pitch - Brass
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 24 Diametrical Pitch - Brass on the Small Parts and Bearings website.
Gears - Bevel - 32 Diametrical Pitch - Brass
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 32 Diametrical Pitch - Brass on the Small Parts and Bearings website.
Gears - Bevel - 48 Diametrical Pitch - Brass
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Brass on the Small Parts and Bearings website.
Gears - Bevel - 48 Diametrical Pitch - Steel
For 90o angle power transfer. Ratios exceeding 1 to 1.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Steel on the Small Parts and Bearings website.
Gears Metric Bevel
Gears - Bevel - Module 0.5 - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 0.5 - Plastic on the Small Parts and Bearings website.
Gears - Bevel - Module 0.8 - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - Module 0.8 - Plastic on the Small Parts and Bearings website.
Gears Inch Bevel
Gears - Bevel - 24 Diametrical Pitch - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 24 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Bevel - 32 Diametrical Pitch - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 32 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears - Bevel - 48 Diametrical Pitch - Plastic
For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.
20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Plastic on the Small Parts and Bearings website.
Gears Metric Mitre
Gears - Mitre - Module 0.5 - Brass
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 0.5 - Brass on the Small Parts and Bearings website.
Gears - Mitre - Module 0.6 - Aluminium
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 0.6 - Aluminium on the Small Parts and Bearings website.
Gears - Mitre - Module 0.6 - Brass
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 0.6 - Brass on the Small Parts and Bearings website.
Gears - Mitre - Module 0.6 - Stainless
1:1 Ratio. 20o Pressure Angle
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 0.6 - Stainless on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 122541 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
