Miniature Bearings Australia Pty Ltd

Gears Inch Internal Categories


Gears - Internal - 24 Diametrical Pitch - Aluminium
Gears - Internal - 24 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


There is also a good range of Gears - Internal - 24 Diametrical Pitch - Aluminium on the Small Parts and Bearings website.


Gears - Internal - 24 Diametrical Pitch - Brass
Gears - Internal - 24 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

Brass


There is also a good range of Gears - Internal - 24 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Internal - 24 Diametrical Pitch - Stainless
Gears - Internal - 24 Diametrical Pitch - Stainless

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


There is also a good range of Gears - Internal - 24 Diametrical Pitch - Stainless on the Small Parts and Bearings website.


Gears - Internal - 32 Diametrical Pitch - Aluminium
Gears - Internal - 32 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


There is also a good range of Gears - Internal - 32 Diametrical Pitch - Aluminium on the Small Parts and Bearings website.


Gears - Internal - 32 Diametrical Pitch - Brass
Gears - Internal - 32 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

Brass


There is also a good range of Gears - Internal - 32 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Internal - 32 Diametrical Pitch - Stainless
Gears - Internal - 32 Diametrical Pitch - Stainless

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - 32 Diametrical Pitch - Stainless on the Small Parts and Bearings website.


Gears - Internal - 48 Diametrical Pitch - Aluminium
Gears - Internal - 48 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


There is also a good range of Gears - Internal - 48 Diametrical Pitch - Aluminium on the Small Parts and Bearings website.


Gears - Internal - 48 Diametrical Pitch - Brass
Gears - Internal - 48 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

Brass


There is also a good range of Gears - Internal - 48 Diametrical Pitch - Brass on the Small Parts and Bearings website.


Gears - Internal - 48 Diametrical Pitch - Stainless
Gears - Internal - 48 Diametrical Pitch - Stainless

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - 48 Diametrical Pitch - Stainless on the Small Parts and Bearings website.


Gears - Internal - 64 Diametrical Pitch - Aluminium
Gears - Internal - 64 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


There is also a good range of Gears - Internal - 64 Diametrical Pitch - Aluminium on the Small Parts and Bearings website.


Gears - Internal - 64 Diametrical Pitch - Stainless
Gears - Internal - 64 Diametrical Pitch - Stainless

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - 64 Diametrical Pitch - Stainless on the Small Parts and Bearings website.


Gears - Internal - 72 Diametrical Pitch - Aluminium
Gears - Internal - 72 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


There is also a good range of Gears - Internal - 72 Diametrical Pitch - Aluminium on the Small Parts and Bearings website.


Gears - Internal - 72 Diametrical Pitch - Stainless
Gears - Internal - 72 Diametrical Pitch - Stainless

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - 72 Diametrical Pitch - Stainless on the Small Parts and Bearings website.


Gears - Internal - 96 Diametrical Pitch - Aluminium
Gears - Internal - 96 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


There is also a good range of Gears - Internal - 96 Diametrical Pitch - Aluminium on the Small Parts and Bearings website.


Gears - Internal - 96 Diametrical Pitch - Stainless
Gears - Internal - 96 Diametrical Pitch - Stainless

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - 96 Diametrical Pitch - Stainless on the Small Parts and Bearings website.


You may also be interested in

Gears Metric Internal


Gears - Internal - Module 0.5 - Stainless
Gears - Internal - Module 0.5 - Stainless

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - Module 0.5 - Stainless on the Small Parts and Bearings website.


Gears - Internal - Module 0.8 - Stainless
Gears - Internal - Module 0.8 - Stainless

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - Module 0.8 - Stainless on the Small Parts and Bearings website.


Gears - Internal - Module 1 - Stainless
Gears - Internal - Module 1 - Stainless

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


There is also a good range of Gears - Internal - Module 1 - Stainless on the Small Parts and Bearings website.


Clips


Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.

There is also a good range of Snap Rings - Internal - Basic on the Small Parts and Bearings website.


Circlips


Circlips - Internal - Round Section
Circlips - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.

Related Information:

There is also a good range of Circlips - Internal - Round Section on the Small Parts and Bearings website.


Circlips - Internal - Bevelled
Circlips - Internal - Bevelled

Also see combined categories:
All Internal Circlips

N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments.

Related Information:

There is also a good range of Circlips - Internal - Bevelled on the Small Parts and Bearings website.


Circlips - Internal - Inverted
Circlips - Internal - Inverted

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers.

Related Information:

There is also a good range of Circlips - Internal - Inverted on the Small Parts and Bearings website.


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Carbon Steel on the Small Parts and Bearings website.


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Zinc Plated on the Small Parts and Bearings website.


Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components.

Related Information:

There is also a good range of Circlips - Internal - Tabbed on the Small Parts and Bearings website.


Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.

There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.


Spiral Rings - Internal - Light Duty
Spiral Rings - Internal - Light Duty

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.

There is also a good range of Spiral Rings - Internal - Light Duty on the Small Parts and Bearings website.


Spiral Rings - Internal - Medium Duty
Spiral Rings - Internal - Medium Duty

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.

There is also a good range of Spiral Rings - Internal - Medium Duty on the Small Parts and Bearings website.


Spiral Rings - Internal - Medium-Heavy Duty
Spiral Rings - Internal - Medium-Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.

There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty on the Small Parts and Bearings website.


Snap Rings - Internal - Stainless Steel
Snap Rings - Internal - Stainless Steel

Also see combined categories:
All Internal Snaprings

Internal snaprings are similar to an internal circlip without the lugs

301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.

There is also a good range of Snap Rings - Internal - Stainless Steel on the Small Parts and Bearings website.


Washers - Lock - Internal Tooth - Spring Steel
Washers - Lock - Internal Tooth - Spring Steel

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

There is also a good range of Washers - Lock - Internal Tooth - Spring Steel on the Small Parts and Bearings website.


Washers - Lock - Internal Tooth - Stainless Steel
Washers - Lock - Internal Tooth - Stainless Steel

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

There is also a good range of Washers - Lock - Internal Tooth - Stainless Steel on the Small Parts and Bearings website.


Tools - Circlip Pliers - Internal
Tools - Circlip Pliers - Internal

Also see combined categories:
All Tools

Internal circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.

There is also a good range of Tools - Circlip Pliers - Internal on the Small Parts and Bearings website.


Rings - Retaining - PR Type Internal - For Linear Bearings
Rings - Retaining - PR Type Internal - For Linear Bearings


Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


There is also a good range of Rings - Retaining - PR Type Internal - For Linear Bearings on the Small Parts and Bearings website.


Pins - Taper - Metric - Extractable - Internal Thread
Pins - Taper - Metric - Extractable - Internal Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded internally for easy extraction.

DIN 7978. Mild Steel.

Related Information:

There is also a good range of Pins - Taper - Metric - Extractable - Internal Thread on the Small Parts and Bearings website.


Catches - Compression Spring
Catches - Compression Spring


Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.

Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals.

There is also a good range of Catches - Compression Spring on the Small Parts and Bearings website.


R Clips - Double Coil - Steel
R Clips - Double Coil - Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins


There is also a good range of R Clips - Double Coil - Steel on the Small Parts and Bearings website.


R Clips - Single Coil - Steel
R Clips - Single Coil - Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins


There is also a good range of R Clips - Single Coil - Steel on the Small Parts and Bearings website.


R Clips - Single Coil - Stainless Steel
R Clips - Single Coil - Stainless Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins


There is also a good range of R Clips - Single Coil - Stainless Steel on the Small Parts and Bearings website.


Standoffs - Hexagonal
Standoffs - Hexagonal


Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


There is also a good range of Standoffs - Hexagonal on the Small Parts and Bearings website.


Standoffs - Round
Standoffs - Round


Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


There is also a good range of Standoffs - Round on the Small Parts and Bearings website.


Tools - Circlip Pliers - Reversible
Tools - Circlip Pliers - Reversible

Also see combined categories:
All Tools

Reversible circlip pliers for internal and external circlips.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.

There is also a good range of Tools - Circlip Pliers - Reversible on the Small Parts and Bearings website.


Shafts - Idler
Shafts - Idler


Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Related Information:

There is also a good range of Shafts - Idler on the Small Parts and Bearings website.


Mounts - Leveling - Nylon - Socket Type - No Lag Holes
Mounts - Leveling - Nylon - Socket Type - No Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel socket internal threads. Use your own custom thread length. Adjusters.


Related Information:

There is also a good range of Mounts - Leveling - Nylon - Socket Type - No Lag Holes on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking
Inserts - Thread Repair - Keylocking

Also see combined categories:
All Keylocking Inserts and Kits

Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.

Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.

Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking on the Small Parts and Bearings website.


Enclosures - Aluminium - 100 Series
Enclosures - Aluminium - 100 Series

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical or electrical projects.

Internal guide slots for mounting PCB assemblies vertically. Ideal for housing sensitive electrical, mechanical, pneumatic or hydraulic devices. Provides effective shielding of EMI and RFI. Designed to IP65 of IEC529 and NEMA 4 (dust and hoseproof). The lid incorporates a recessed neoprene gasket.

There is also a good range of Enclosures - Aluminium - 100 Series on the Small Parts and Bearings website.


Pins - Ball Lock - Marine Style - Half Ring
Pins - Ball Lock - Marine Style - Half Ring

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel. Positive lock detent pins.

Related Information:

There is also a good range of Pins - Ball Lock - Marine Style - Half Ring on the Small Parts and Bearings website.


Pins - Ball Lock - Marine Style - Recessed Head
Pins - Ball Lock - Marine Style - Recessed  Head

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel. Positive lock detent pins.

Related Information:

There is also a good range of Pins - Ball Lock - Marine Style - Recessed Head on the Small Parts and Bearings website.


Mounts - Vibration - Isolation Pads - Compression Shear
Mounts - Vibration - Isolation Pads - Compression Shear

Also see combined categories:
All Isolation Pad Mounts

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.

There is also a good range of Mounts - Vibration - Isolation Pads - Compression Shear on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122538 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122538 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.