Miniature Bearings Australia Pty Ltd

gears imperial bevel categories


Pinion Wire Imperial


Gears - Pinion Wire - 24 Diametrical Pitch
Gears - Pinion Wire - 24 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.


There is also a good range of Gears - Pinion Wire - 24 Diametrical Pitch on the Small Parts and Bearings website.

Gears - Pinion Wire - 32 Diametrical Pitch
Gears - Pinion Wire - 32 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.


There is also a good range of Gears - Pinion Wire - 32 Diametrical Pitch on the Small Parts and Bearings website.

Gears - Pinion Wire - 48 Diametrical Pitch
Gears - Pinion Wire - 48 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.


There is also a good range of Gears - Pinion Wire - 48 Diametrical Pitch on the Small Parts and Bearings website.

Gears - Pinion Wire - 64 Diametrical Pitch
Gears - Pinion Wire - 64 Diametrical Pitch

Also see combined categories:
All Imperial Pinion Wire

Brass and carbon steel.

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.


There is also a good range of Gears - Pinion Wire - 64 Diametrical Pitch on the Small Parts and Bearings website.

Gears Inch Racks


Gear Racks - 16DP - Steel
Gear Racks -  16DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 16DP - Steel on the Small Parts and Bearings website.

Gear Racks - 16DP - Plastic
Gear Racks -  16DP - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 16DP - Plastic on the Small Parts and Bearings website.

Gears Inch Spur


Gears - Spur - 120DP - Stem - Stainless
Gears - Spur - 120DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 120DP - Stem - Stainless on the Small Parts and Bearings website.

Gears - Spur - 24DP - Stem - Stainless
Gears - Spur -  24DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 24DP - Stem - Stainless on the Small Parts and Bearings website.

Gears - Spur - 32DP - Stem - Stainless
Gears - Spur -  32DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 32DP - Stem - Stainless on the Small Parts and Bearings website.

Gears - Spur - 48DP - Stem - Stainless
Gears - Spur -  48DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 48DP - Stem - Stainless on the Small Parts and Bearings website.

Gears - Spur - 64DP - Stem - Stainless
Gears - Spur -  64DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Stem - Stainless on the Small Parts and Bearings website.

Gears - Spur - 72DP - Stem - Stainless
Gears - Spur -  72DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 72DP - Stem - Stainless on the Small Parts and Bearings website.

Gears - Spur - 80DP - Stem - Stainless
Gears - Spur -  80DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 80DP - Stem - Stainless on the Small Parts and Bearings website.

Gears - Spur - 96DP - Stem - Stainless
Gears - Spur -  96DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 96DP - Stem - Stainless on the Small Parts and Bearings website.

Gears Inch Racks


Gear Racks - 12DP - Steel
Gear Racks -  12DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

12 DP. Approx 6.65mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 12DP - Steel on the Small Parts and Bearings website.

Gear Racks - 24DP - 14.5 PA - Brass
Gear Racks -  24DP - 14.5 PA - Brass

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 24DP - 14.5 PA - Brass on the Small Parts and Bearings website.

Gear Racks - 24DP - 14.5 PA - Plastic
Gear Racks -  24DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 24DP - 14.5 PA - Plastic on the Small Parts and Bearings website.

Gear Racks - 32DP - 14.5 PA - Brass
Gear Racks -  32DP - 14.5 PA - Brass

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 32DP - 14.5 PA - Brass on the Small Parts and Bearings website.

Gear Racks - 48DP - 14.5 PA - Brass
Gear Racks -  48DP - 14.5 PA - Brass

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

48 DP. Approx 1.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 48DP - 14.5 PA - Brass on the Small Parts and Bearings website.

Gear Racks - 48DP - 14.5 PA - Steel
Gear Racks -  48DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 48DP - 14.5 PA - Steel on the Small Parts and Bearings website.

Gear Racks - 120DP - Stainless
Gear Racks - 120DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 120 DP. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 120DP - Stainless on the Small Parts and Bearings website.

Gear Racks - 24DP - Stainless
Gear Racks -  24DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 24DP - Stainless on the Small Parts and Bearings website.

Gear Racks - 32DP - 14.5 PA - Plastic
Gear Racks -  32DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 32DP - 14.5 PA - Plastic on the Small Parts and Bearings website.

Gear Racks - 48DP - 14.5 PA - Plastic
Gear Racks -  48DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 48DP - 14.5 PA - Plastic on the Small Parts and Bearings website.

Gear Racks - 48DP - Stainless
Gear Racks -  48DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 48DP - Stainless on the Small Parts and Bearings website.

Gear Racks - 64DP - Stainless
Gear Racks -  64DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 64DP - Stainless on the Small Parts and Bearings website.

Gear Racks - 72DP - Stainless
Gear Racks -  72DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 72 DP. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 72DP - Stainless on the Small Parts and Bearings website.

Gear Racks - 96DP - Stainless
Gear Racks -  96DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 96 DP. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 96DP - Stainless on the Small Parts and Bearings website.

Gear Racks - 10DP - 14.5 PA - Steel
Gear Racks - 10DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 10 DP. Approx 7.98mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 10DP - 14.5 PA - Steel on the Small Parts and Bearings website.

Gear Racks - 20DP - 14.5 PA - Steel
Gear Racks - 20DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 20 DP. Approx 3.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 20DP - 14.5 PA - Steel on the Small Parts and Bearings website.

Gear Racks - 24DP - 14.5 PA - Steel
Gear Racks -  24DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Carbon Steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 24DP - 14.5 PA - Steel on the Small Parts and Bearings website.

Gear Racks - 32DP - 14.5 PA - Steel
Gear Racks -  32DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Carbon Steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 32DP - 14.5 PA - Steel on the Small Parts and Bearings website.

Gear Racks - 32DP - Stainless Steel
Gear Racks -  32DP - Stainless Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 32DP - Stainless Steel on the Small Parts and Bearings website.

Gear Racks - 6DP - 14.5 PA - Steel
Gear Racks -  6DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 6 DP. Approx 13.3mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 6DP - 14.5 PA - Steel on the Small Parts and Bearings website.

Gear Racks - 8DP - 14.5 PA - Steel
Gear Racks -  8DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 8 DP. Approx 9.98mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 8DP - 14.5 PA - Steel on the Small Parts and Bearings website.

Gears Inch Anti-Backlash


Gears - Spur - Antibacklash - 32DP - Stainless
Gears - Spur - Antibacklash -  32DP - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Anti-Backlash Spur Gears

20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Stainless Steel.

32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - Antibacklash - 32DP - Stainless on the Small Parts and Bearings website.

Gears Inch Racks


Gear Racks - 120DP - Aluminium - Side Holes
Gear Racks -  120DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

120 DP. Approx 0.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 120DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 120DP - Stainless - Side Holes
Gear Racks -  120DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

120 DP. Approx 0.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 120DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 16DP - Stainless - Tapped Base
Gear Racks -  16DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 16DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 20DP - Stainless - Tapped Base
Gear Racks -  20DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

20 DP. Approx 3.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 20DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 24DP - Aluminium - Side Holes
Gear Racks -  24DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 24DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 24DP - Stainless - Side Holes
Gear Racks -  24DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 24DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 24DP - Stainless - Tapped Base
Gear Racks -  24DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 24DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 32DP - Aluminium - Side Holes
Gear Racks -  32DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 32DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 32DP - Stainless - Side Holes
Gear Racks -  32DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 32DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 32DP - Stainless - Tapped Base
Gear Racks -  32DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 32DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 48DP - Aluminium - Side Holes
Gear Racks -  48DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

48 DP. Approx 1.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 48DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 48DP - Stainless - Side Holes
Gear Racks -  48DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

48 DP. Approx 1.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 48DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 48DP - Stainless - Tapped Base
Gear Racks -  48DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

48 DP. Approx 1.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 48DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 64DP - Aluminium - Side Holes
Gear Racks -  64DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

64 DP. Approx 1.25mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 64DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 64DP - Stainless - Side Holes
Gear Racks -  64DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

64 DP. Approx 1.25mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 64DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 64DP - Stainless - Tapped Base
Gear Racks -  64DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

64 DP. Approx 1.25mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 64DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 72DP - Aluminium - Side Holes
Gear Racks -  72DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 72DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 72DP - Stainless - Side Holes
Gear Racks -  72DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 72DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 72DP - Stainless - Tapped Base
Gear Racks -  72DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 72DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 80DP - Aluminium - Side Holes
Gear Racks -  80DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

80 DP. Approx 1.00mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 80DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 80DP - Stainless - Side Holes
Gear Racks -  80DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

80 DP. Approx 1.00mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 80DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 80DP - Stainless - Tapped Base
Gear Racks -  80DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

80 DP. Approx 1.00mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 80DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Gear Racks - 96DP - Aluminium - Side Holes
Gear Racks -  96DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 96DP - Aluminium - Side Holes on the Small Parts and Bearings website.

Gear Racks - 96DP - Stainless - Side Holes
Gear Racks -  96DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 96DP - Stainless - Side Holes on the Small Parts and Bearings website.

Gear Racks - 96DP - Stainless - Tapped Base
Gear Racks -  96DP - Stainless - Tapped Base

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


There is also a good range of Gear Racks - 96DP - Stainless - Tapped Base on the Small Parts and Bearings website.

Spur Gear Stock Inch


Gears - Spur - Stock - 20DP - Steel
Gears - Spur - Stock - 20DP - Steel

Also see combined categories:
All Imperial Spur Gear Stock

Lengths of spur gear stock for manufacturing gears. DP stands for Diametrical Pitch and is an imperial measurement system.

20 Diametrical Pitch. Approx 3.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - Stock - 20DP - Steel on the Small Parts and Bearings website.

Gears - Spur - Stock - 24DP - Steel
Gears - Spur - Stock - 24DP - Steel

Also see combined categories:
All Imperial Spur Gear Stock

Lengths of spur gear stock for manufacturing gears. DP stands for Diametrical Pitch and is an imperial measurement system.

24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - Stock - 24DP - Steel on the Small Parts and Bearings website.

Gears Inch Spur


Gears - Spur - 48DP - Differential End - Aluminium
Gears - Spur -  48DP - Differential End - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 48DP - Differential End - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 64DP - Differential End - Aluminium
Gears - Spur -  64DP - Differential End - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Differential End - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 72DP - Differential End - Aluminium
Gears - Spur -  72DP - Differential End - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 72DP - Differential End - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 96DP - Differential End - Aluminium
Gears - Spur -  96DP - Differential End - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 96DP - Differential End - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 48DP - Differential End - Stainless
Gears - Spur -  48DP - Differential End - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 48DP - Differential End - Stainless on the Small Parts and Bearings website.

Gears - Spur - 64DP - Differential End - Stainless
Gears - Spur -  64DP - Differential End - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Differential End - Stainless on the Small Parts and Bearings website.

Gears - Spur - 72DP - Differential End - Stainless
Gears - Spur -  72DP - Differential End - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 72DP - Differential End - Stainless on the Small Parts and Bearings website.

Gears - Spur - 96DP - Differential End - Stainless
Gears - Spur -  96DP - Differential End - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 96DP - Differential End - Stainless on the Small Parts and Bearings website.

Gears - Spur - 64DP - Brass
Gears - Spur -  64DP - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Brass on the Small Parts and Bearings website.

Gears - Spur - 64DP - Stainless
Gears - Spur -  64DP - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Stainless on the Small Parts and Bearings website.

Gears - Spur - 72DP - Stainless
Gears - Spur -  72DP - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 72DP - Stainless on the Small Parts and Bearings website.

Gears - Spur - 64DP - Plastic
Gears - Spur -  64DP - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Plastic on the Small Parts and Bearings website.

Gears - Spur - 120DP - Aluminium
Gears - Spur - 120DP - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 120DP - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 120DP - Hub Mounting - Aluminium
Gears - Spur - 120DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 120DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 120DP - Hub Mounting - Stainless
Gears - Spur - 120DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 120DP - Hub Mounting - Stainless on the Small Parts and Bearings website.

Gears - Spur - 16DP - 14.5 Degree - Steel
Gears - Spur -  16DP - 14.5 Degree - Steel

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 16DP - 14.5 Degree - Steel on the Small Parts and Bearings website.

Gears - Spur - 24DP - 14.5 Degree - Brass
Gears - Spur -  24DP - 14.5 Degree - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 24DP - 14.5 Degree - Brass on the Small Parts and Bearings website.

Gears - Spur - 24DP - 14.5 Degree - Plastic
Gears - Spur -  24DP - 14.5 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Nylon.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 24DP - 14.5 Degree - Plastic on the Small Parts and Bearings website.

Gears - Spur - 24DP - 14.5 Degree - Steel
Gears - Spur -  24DP - 14.5 Degree - Steel

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Carbon Steel.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 24DP - 14.5 Degree - Steel on the Small Parts and Bearings website.

Gears - Spur - 32DP - 14.5 Degree - Brass
Gears - Spur -  32DP - 14.5 Degree - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 32DP - 14.5 Degree - Brass on the Small Parts and Bearings website.

Gears - Spur - 32DP - 20 Degree - Brass
Gears - Spur -  32DP - 20 Degree - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 32DP - 20 Degree - Brass on the Small Parts and Bearings website.

Gears - Spur - 32DP - 20 Degree - Plastic
Gears - Spur -  32DP - 20 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 32DP - 20 Degree - Plastic on the Small Parts and Bearings website.

Gears - Spur - 48DP - 14.5 Degree - Brass
Gears - Spur -  48DP - 14.5 Degree - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 48DP - 14.5 Degree - Brass on the Small Parts and Bearings website.

Gears - Spur - 48DP - 20 Degree - Brass
Gears - Spur -  48DP - 20 Degree - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 48DP - 20 Degree - Brass on the Small Parts and Bearings website.

Gears - Spur - 48DP - Hub Mounting - Aluminium
Gears - Spur -  48DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 48DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 48DP - Hub Mounting - Stainless
Gears - Spur -  48DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 48DP - Hub Mounting - Stainless on the Small Parts and Bearings website.

Gears - Spur - 64DP - Aluminium
Gears - Spur -  64DP - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 64DP - Hub Mounting - Aluminium
Gears - Spur -  64DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 64DP - Hub Mounting - Stainless
Gears - Spur -  64DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 64DP - Hub Mounting - Stainless on the Small Parts and Bearings website.

Gears - Spur - 72DP - Aluminium
Gears - Spur -  72DP - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 72DP - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 72DP - Hub Mounting - Aluminium
Gears - Spur -  72DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 72DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 72DP - Hub Mounting - Stainless
Gears - Spur -  72DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 72DP - Hub Mounting - Stainless on the Small Parts and Bearings website.

Gears - Spur - 80DP - Aluminium
Gears - Spur -  80DP - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.318mm (1/80 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 80DP - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 80DP - Hub Mounting - Aluminium
Gears - Spur -  80DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 80DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 80DP - Hub Mounting - Stainless
Gears - Spur -  80DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 80DP - Hub Mounting - Stainless on the Small Parts and Bearings website.

Gears - Spur - 96DP - Aluminium
Gears - Spur -  96DP - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.265mm (1/96 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

There is also a good range of Gears - Spur - 96DP - Aluminium on the Small Parts and Bearings website.

Gears - Spur - 96DP - Hub Mounting - Aluminium
Gears - Spur -  96DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
Gear Hubs to Suit
For simple ready selected sets of spur gears please see the SPB WebsiteFor simple ready selected sets of rack and gear please see the HES website

There is also a good range of Gears - Spur - 96DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122785 products in 2708 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122785 products in 2708 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.